GROWNEER Bathroom Fan with Bluetooth Speaker User Manual

1. Product Overview

The GROWNEER Bathroom Fan is an advanced ventilation solution designed for modern bathrooms. It integrates multiple functions including powerful exhaust, rapid heating, versatile lighting with RGB and color temperature options, and a built-in Bluetooth speaker for an enhanced audio experience. This manual provides detailed instructions for installation, operation, and maintenance.

Figure 1: GROWNEER Bathroom Fan with Bluetooth Speaker and Remote Control

Key Features:

• Ventilation: 110/160 CFM airflow with 1.0 Sone ultra-quiet operation, suitable for rooms up to 160 sq. ft.
• Heating: Integrated heater with two adjustable temperature settings and a Smart Shower Mode (60 min heating, 15 min auto ventilation).
• Lighting: 2700K/4000K/5000K 3-speed adjustable color temperature, 200lm 2700K night light, and 9 unique RGB modes.
• Audio: Built-in Bluetooth speaker for immersive sound, controllable via remote.
• Control: Full-function remote control for all settings.

2. Setup and Installation

Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified electrician.

2.1 Unboxing and Components

Carefully unpack all components and verify against the packing list. The package includes the fan housing, light/speaker panel, mounting bracket, remote control, and instruction manual.

Figure 2: Unboxed Components

2.2 Installation Requirements

• Installation size requirement: 12.12 x 11.37 x 9.5 inches.
• Vent duct size: 6 inch (duct not included).
• Power source: AC 120 Volts.

Figure 3: Installation Dimensions

2.3 Step-by-Step Installation

1. Prepare Ceiling Opening: Use the provided drywall cutout template to mark and cut the appropriate opening in your ceiling.
2. Mount the Bracket: Secure the mounting bracket to the ceiling joists using appropriate screws.
3. Install Fan Housing: Insert the fan housing into the ceiling opening and attach it to the mounting bracket.
4. Electrical Wiring: Connect the fan's electrical wires (Black-L, White-N, Green-GND) to your household wiring. Ensure all connections are secure and follow local electrical codes.
5. Connect Ducting: Attach a 6-inch ventilation duct (not included) to the fan's exhaust port and secure it with tape.
6. Connect Light/Speaker Panel: Connect the LED and Bluetooth wires from the light/speaker panel to the corresponding connectors on the fan housing.
7. Secure Panel: Squeeze the panel springs and insert them into the spring rails on the fan housing, then push the panel flush with the ceiling.

2.4 Installation Videos

3. Operating Instructions

All functions of the GROWNEER Bathroom Fan are operated via the included remote control. The maximum range of the remote control is 19 ft; the recommended optimal distance is within 6 ft.

3.1 Remote Control Functions

Figure 4: Remote Control Layout

• Power ON/OFF: Turn on/off all functions with one click.
• Fan ON/OFF: Two-speed adjustment (110/160 CFM) with one-touch switching. The 160 CFM speed is higher, and slight noise is a normal occurrence. Note: The fan has a 3-second delay after starting to protect the motor.
• Heater: Two-speed adjustment (1800W/900W) with one-touch switching. Note: The heating function will have a 15-second delay after being turned off to protect the lifespan of the heating module.
• Light Control: Light ON/OFF, Brightness adjustment (20%-60%-100%), Color Temperature (CCT) adjustment (2700K/4000K/5000K).
• RGB Mode: Explore 9 unique RGB modes for personalized ambiance.
• Night Light: 200lm 2700K night light for soft illumination.
• Music Sync: Play/Pause, Volume Up/Down, Previous/Next Track.

3.2 Smart Modes

• Smart Shower Mode: Offers 60 minutes of heating followed by 15 minutes of automatic ventilation to dry out the bathroom.
• Smart Dry Room Mode: (Not detailed in provided data, assume similar automated ventilation/heating cycle for drying).

Figure 5: Smart Modes Explained

3.3 Bluetooth Speaker Pairing

The remote control is pre-paired with the product at the factory. To connect your phone to the Bluetooth speaker:

1. Ensure the fan is powered on.
2. On your phone, search for "GROWNEER Bath & Exhaust Fan" in your Bluetooth settings.
3. Select the device to connect. A prompt sound from the fan indicates Bluetooth is connected.

Figure 6: Bluetooth Pairing

4. Maintenance

Regular maintenance ensures the longevity and efficient operation of your GROWNEER Bathroom Fan.

4.1 Cleaning

• Always disconnect power before cleaning.
• Wipe the exterior surfaces of the fan and light panel with a soft, damp cloth. Do not use abrasive cleaners.
• Periodically clean the fan grille to prevent dust buildup, which can impede airflow.

5. Troubleshooting

If you encounter any issues with your GROWNEER Bathroom Fan, refer to the following common solutions:

5.1 Lost Remote Control

1. Request a replacement remote control from GROWNEER customer support.
2. After receiving the new remote, restart the power of the fan. Press the remote control power button 5-6 times within 30 seconds. Pairing is successful after hearing a prompt sound from the fan.

5.2 Fan Not Operating / Weak Airflow

• Check the power connection to ensure it is secure.
• Verify that the fan is turned on via the remote control.
• Ensure the exhaust ducting is not blocked or kinked.
• Clean the fan grille and internal components if dust or debris is present.

5.3 Light Not Functioning

• Check the light ON/OFF button on the remote.
• Ensure the light panel's wires are securely connected to the fan housing.

5.4 Bluetooth Connection Issues

• Ensure the fan is powered on and within Bluetooth range of your device.
• Forget the device on your phone's Bluetooth settings and attempt to re-pair.
• Restart both the fan (by cycling power) and your Bluetooth device.

6. Specifications

Figure 7: Motor and Performance Specifications

7. Warranty and Support

GROWNEER offers a 12-month warranty and 24-hour customer support to ensure your satisfaction. If you encounter any issues, please do not hesitate to reach out to us.

Contact Information:

• Phone: 1(855)626-9888
• Online Support: Refer to your product packaging or the official GROWNEER website for additional contact methods.

Figure 8: Dedicated Customer Support