Valorise UG-08S Wireless Gaming Headset User Manual

Introduction

The Valorise UG-08S is a versatile wireless gaming headset designed to provide an immersive audio experience across multiple platforms. It features 7.1 surround sound, multiple connectivity options including 2.4GHz wireless and Bluetooth 5.4, a long-lasting battery, and an ENC noise-canceling microphone. This manual provides detailed instructions for setup, operation, and maintenance of your headset.

What's in the Box

• 1 x Valorise Wireless Gaming Headset
• 1 x USB & Type-C 2-in-1 Transmitter
• 1 x 3.5mm Braided Audio Cable
• 1 x Type-C Charging Cable
• 1 x User Manual

Product Features

• 7.1 Surround Sound: Provides a 3D stereo surround sound experience for enhanced gaming audio. Activate by long-pressing the 'M' key.
• Multiple Connectivity: Supports 2.4GHz wireless (ultra-low latency ≤5ms), Bluetooth 5.4, and 3.5mm wired connections.
• Extended Battery Life: Up to 100 hours playtime in Bluetooth mode (RGB lights and mic off), or 45 hours in 2.4GHz dongle mode (RGB lights and mic on). Full recharge in 2-3 hours. Supports use while charging.
• ENC Noise-Canceling Microphone: 360° omnidirectional microphone with Environmental Noise Cancellation for clear voice communication. Features a retractable design and one-touch mute.
• RGB Lighting: Ambient RGB lights with two modes (steady and gradient). Double-click the 'M' key to activate, single-click to switch modes.
• Comfortable Design: Ergonomic memory sponge cushions and breathable fabric minimize sweat and heat, providing comfort for extended wear. Features rotating ear cups and adjustable angles.
• Passive Noise Cancellation: Ear cups designed to effectively isolate environmental noise.

Setup

2.4GHz Wireless Connection (PC, PS5, PS4, Mac, Laptop, Tablet, Nintendo Switch)

1. Insert the USB & Type-C 2-in-1 transmitter into an available USB-A or USB-C port on your device.
2. Power on the headset by holding the power button. The headset will automatically connect to the transmitter.
3. Ensure the headset is selected as the audio input and output device in your system settings.
4. Note: For Nintendo Switch, the microphone function is invalid in 2.4GHz mode. For PS5, only 2.4GHz dongle mode is supported for wireless connection, not Bluetooth.

Bluetooth 5.4 Connection (Mobile Phone, Tablet, iPad, Laptop, Switch)

1. Ensure the headset is powered on.
2. Triple-tap the power button to switch the headset to Bluetooth pairing mode. The LED indicator will flash.
3. On your mobile device, go to Bluetooth settings and select "Valorise UG-08S" to pair.
4. Note: The headset's wireless function is not compatible with Xbox Series.

3.5mm Wired Connection (Various Gaming Devices, Xbox Series)

1. Connect the provided 3.5mm braided audio cable to the headset's 3.5mm audio jack.
2. Connect the other end of the 3.5mm cable to your gaming device's 3.5mm port.
3. Note: In wired mode, the microphone function is not active.

Operating Instructions

Image: Headset controls including volume wheel, mute button, and ports.

Image: Retractable microphone extended from the headset.

• Power On/Off: Press and hold the Power Button for 3 seconds.
• Volume Control: Use the Volume Wheel to adjust the audio level.
• Microphone Mute: Press the Mute Button to mute or unmute the microphone. The microphone's LED indicator will change color to show its status.
• 7.1 Surround Sound Activation: Long-press the 'M' key (Mode button) to activate or deactivate 7.1 surround sound.
• RGB Lighting Control: Double-click the 'M' key to activate the ambient RGB lights. Single-click the 'M' key to switch between steady light and gradient modes.
• Switching Connectivity Modes: Triple-tap the Power Button to cycle between 2.4GHz wireless and Bluetooth modes.

Battery and Charging

• Battery Life: Up to 100 hours in Bluetooth mode (RGB lights and microphone off). Up to 45 hours in 2.4GHz dongle mode (RGB lights and microphone on).
• Charging Time: Approximately 2-3 hours for a full charge.
• Charging Method: Use the provided Type-C charging cable to connect the headset to a power source.
• Low Battery Alert: The headset will provide an alert when the battery is low.
• Use While Charging: The headset can be used while it is charging.

Comfort and Design

• Ear Cushions: Soft memory sponge cushions with breathable fabric for comfort and to minimize heat buildup.
• Headband: Adjustable headband with soft cushioning for a customized fit.
• Earcups: Rotating earcups and adjustable angles ensure a comfortable fit for various head shapes.
• Passive Noise Cancellation: The design of the earcups helps to passively block out ambient noise.

Specifications

Troubleshooting

• No Sound/Microphone Not Working: Ensure the headset is correctly connected via your chosen method (2.4GHz dongle, Bluetooth, or 3.5mm cable). Check system audio settings to confirm the headset is selected as the default input/output device. Verify the microphone is not muted.
• Connectivity Issues: For 2.4GHz, ensure the dongle is securely plugged in and the headset is in 2.4GHz mode. For Bluetooth, ensure the headset is in pairing mode (triple-tap power button) and within range of your device.
• Short Battery Life: Ensure RGB lights and 7.1 surround sound are turned off if maximum battery life is desired, as these features consume more power.
• Headset Not Charging: Verify the Type-C charging cable is properly connected to both the headset and a working power source.

Warranty and Support

Valorise provides professional services and expert support for your wireless gaming headset. For any inquiries or assistance, please contact our support team. Responses are typically provided within 0-24 hours, offering comprehensive assistance for all your gaming needs.

Product Demonstration