Introduction
Thank you for choosing the Anyglad A24PRO Cordless Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read it thoroughly before first use and keep it for future reference.
Package Contents
Upon opening the package, please ensure all items listed below are present and in good condition:
- Vacuum Machine (Main Body)
- Battery Pack
- Telescopic Tube
- Motorized Brush (Floor Head)
- Crevice Tool
- Dustbin Brush
- Charger
- Cleaning Brush
- Sponge Filter (Extra)
- Wall Mount Stand
- User Manual (this document)
Figure 1: Complete Package Contents
Setup Guide
1. Assembly
- Attach the Telescopic Tube: Insert the telescopic tube into the main vacuum body until it clicks securely into place.
- Connect the Motorized Brush: Attach the motorized brush to the other end of the telescopic tube, ensuring it clicks firmly.
- Install Battery Pack: Insert the battery pack into the designated slot on the main body until it locks.
- Attach Accessories: For handheld use, attach desired accessories (crevice tool, dustbin brush) directly to the main body.
Figure 2: Assembled Vacuum Cleaner and Components
2. Initial Charging
Before first use, fully charge the battery. The battery pack can be charged while attached to the vacuum or separately. Connect the charger to the battery pack and plug it into a power outlet. A full charge takes approximately 4 hours.
Figure 3: Separable Battery Charging
Operating Instructions
1. Power Modes and LED Display
The Anyglad A24PRO features an intuitive LED display that shows battery life and current operating mode. It offers two power modes:
- Eco Mode: Provides up to 45 minutes of runtime with 16KPa suction, ideal for daily cleaning and lighter debris.
- Max Mode: Delivers powerful 30KPa suction for deep cleaning and stubborn dirt, with a runtime of approximately 20 minutes.
Switch between modes using the control button on the main unit. The LED display will indicate the active mode and remaining battery percentage.
Figure 4: LED Display with Power Modes
Figure 5: All-in-One LED Display Features
2. Cleaning Different Surfaces
The motorized brush is designed for effective cleaning on various floor types, including hardwood, low-pile carpets, tiles, and marble floors. For optimal performance, select the appropriate power mode.
Figure 6: Suction Modes for Various Debris
3. Maneuverability and Versatility
The lightweight and ergonomic design allows for easy handheld operation and cleaning of high or narrow spaces. The motorized brush features flexible rotation (180° left and right, 90° up and down) and an integrated LED floor light to illuminate dark areas, ensuring no dust is missed.
Figure 7: Multi-Functional Cleaning Applications
Figure 8: Flexible Rotation and LED Floor Light
Figure 9: Cleaning Coverage per Charge
Maintenance
1. Emptying the Dustbin
The 1.2L large capacity dustbin can be emptied with a single touch. Regularly empty the dustbin to maintain optimal suction performance and prevent clogging.
Figure 10: One-Click Dustbin Emptying
2. Filter Cleaning
The vacuum features a multi-stage filtration system, including a dust separation cartridge, high-density sponge filter, cyclone rotary airflow, and stainless steel mesh filter, ensuring 99.99% effective filtration. The washable filter system helps decrease maintenance costs. Regularly clean the filters to maintain strong suction and prevent secondary emissions. Refer to the included cleaning brush for assistance.
Figure 11: Multi-Stage Filtration System
3. Brush Maintenance
The V-shape anti-tangle electric roller brush is designed to minimize hair tangles. Periodically check the brush roll for any trapped hair or debris and remove it using the provided cleaning tool to ensure smooth operation.
Figure 12: V-Shape Anti-Tangle Brush
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Not turning on | Battery not charged; Battery not properly installed; Power button not pressed correctly. | Ensure battery is fully charged (approx. 4 hours). Reinstall battery pack. Press power button firmly. |
| Reduced suction power | Dustbin full; Filters clogged; Brush roll tangled; Blockage in tube/hose. | Empty dustbin. Clean all filters. Remove tangled hair/debris from brush roll. Check for and remove any blockages. |
| Brush roll not spinning | Brush roll tangled; Motorized brush not properly connected. | Clear any obstructions from the brush roll. Ensure the motorized brush is securely attached to the telescopic tube. |
| Short runtime | Using Max Mode continuously; Battery not fully charged; Battery degradation. | Switch to Eco Mode for longer runtime. Ensure battery is fully charged before use. Contact customer support if battery life significantly decreases. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Anyglad |
| Model Name | A24PRO |
| Suction Power | 30000Pa (Max Mode) |
| Wattage | 300 Watts |
| Battery Capacity | 6 x 2600mAh Lithium-ion |
| Runtime | Up to 45 minutes (Eco Mode) / 20 minutes (Max Mode) |
| Charging Time | Approx. 4 hours |
| Dustbin Capacity | 1.2 Liters |
| Weight | 3.2 pounds |
| Noise Level | 65Db (Low Noise) |
| Filtration System | Multi-stage (Dust separation Cartridge, High Density Sponge Filter, Cyclone Rotary Airflow, Stainless Steel Mesh Filter) |
| Special Features | LED Display, Anti-Tangle Brush, Flexible Rotation, LED Floor Light, Separable Charging |
Warranty and Support
Anyglad is committed to providing excellent customer service. Your Cordless Vacuum Cleaner comes with:
- 24-Hour Quick Response: For any inquiries or issues.
- 30-Day Return and Replace: If you are not satisfied with your product.
- Lifetime Customer Support: Dedicated support for the lifespan of your product.
For further assistance, please refer to the contact information provided in your Quick Start Guide or visit the official Anyglad website.