1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Mechkeys Incott G23 Series Gaming Mouse. The G23 Series offers both wireless 2.4G and wired dual-mode connectivity, featuring high-performance sensors and hot-swappable switches for a customizable gaming experience. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Image: Mechkeys Incott G23 PRO 8K Gaming Mouse (Orange variant).
2. What's in the Box
Verify that all items are present in the package:
- Mouse x1
- 1K USB receiver x1 (G23 only)
- Receiver expander x1 (G23 only)
- 8K receiver x1 (G23 Pro only)
- USB-C cord x1
- Mouse feet (already attached to the bottom of the mouse; kindly tear off the blue protective film when using the mouse)
Image: Package contents of the G23 Series mouse, showing the mouse, USB-C cable, receiver, and additional hot-swappable switches.
3. Product Overview and Button Functions
The Mechkeys Incott G23 Series Gaming Mouse is designed for precision and comfort, featuring an ergonomic design and a skin-friendly coating. It supports both 2.4 GHz wireless and wired connectivity.
Image: Diagram illustrating the various buttons and their functions on the G23 Series mouse.
Button Layout:
- Left Mouse Button
- Right Mouse Button
- Scroll Wheel Button
- Back Button
- Forward Button
- 1K Receiver Storage | DPI / Polling Rate Switch
- ON: Power On
- OFF: Power Off
- HZ: Power On / Polling Rate Switch Mode
- Microswitch Hot-Swap
4. Setup
4.1 Recommended Usage Environment
For optimal wireless transmission, use the mouse within 20 cm of the receiver. Maintain a distance of at least 2 meters from 2.4 GHz interference sources, such as Wi-Fi routers.
Image: Illustration of the recommended setup for the wireless mouse, showing optimal distances from the receiver and other wireless devices.
4.2 Connection Method
The G23 Series mouse supports both wired and 2.4G wireless modes.
Image: Visual guide for connecting the mouse in both wired (USB-C) and wireless (1K or 8K receiver) configurations.
Wired Mode:
Use the provided USB-C charging cable to connect the mouse directly to any USB port on your computer. The mouse will function immediately.
Wireless Mode:
For wireless operation, connect the appropriate USB receiver (1K for G23, 8K for G23 Pro) to your computer. Ensure the mouse is powered on by sliding the bottom switch to the 'ON' position.
4.3 Pairing Steps (8K Receiver)
Follow these steps to pair your G23 Pro mouse with the 8K receiver:
- When the mouse is in the OFF state, press and hold buttons 1, 2, and 3 simultaneously.
- While performing Step 1, toggle the bottom switch (Button 7) to the 'ON' position.
- The indicator light on top of the mouse will flash blue and then turn yellow. Release the buttons after the light changes from blue to yellow.
- While the yellow light is flashing, plug the receiver into the computer's USB port via the data cable. The mouse will connect to the receiver, allowing you to start using it.
Note: If the mouse's indicator light flashes red and yellow, it means it is in 1K pairing mode. You need to switch back by turning off the mouse, holding button 4 while in the 'OFF' position, then switching Button 7 back to 'ON' while still holding button 4. If the light continues to flash yellow, repeat the above steps to pair with 8K mode.
Caution: The receiver should not be plugged into the computer's USB port during the pairing process. Connect the receiver only after completing steps 1, 2, and 3 when the mouse indicator is flashing yellow.
Image: Visual instructions for the 8K receiver pairing process.
Video: Official guide on how to pair the Incott G23 8K and 1K USB receivers. This video demonstrates the pairing process for both receiver types.
5. Operating Instructions
5.1 DPI and Polling Rate Switch
The G23 Series mouse allows you to adjust both DPI (Dots Per Inch) and Polling Rate to suit your preferences. The indicator light on the mouse will change color to reflect the current setting.
Image: Diagram detailing the DPI and Polling Rate switch, along with corresponding indicator light colors for different settings.
DPI Switch:
- Switch the bottom switch (Button 7) to the 'ON' position.
- Use Button 6 to cycle through the DPI settings. There are 6 levels available.
- DPI Values: 400 (Red), 800 (Blue), 1600 (Green), 2400 (Yellow), 3200 (Light Blue), 6400 (Purple).
Polling Rate Switch (1K & 8K):
- Switch the bottom switch (Button 7) to the 'HZ' position.
- Use Button 6 to cycle through the Polling Rate settings.
- 1K Polling Rate Values: 125 (Red), 250 (Blue), 500 (Yellow), 1000 (Orange).
- 8K Polling Rate Values: 125 (Red), 250 (Blue), 500 (Yellow), 1000 (Orange), 2000 (Purple), 4000 (Green), 8000 (White).
Video: This video demonstrates the high polling rate capabilities of the Incott G23 Pro mouse, highlighting its 8K performance.
6. Maintenance
6.1 Microswitch Hot-Swap Replacement
The Incott G23 Series gaming mice feature hot-swappable left and right click switches, allowing for easy customization and replacement. This process is designed to be as simple as replacing a battery.
Image: Step-by-step guide for replacing the microswitches in the G23 Series mouse.
- Remove the hot-swap system: Push forward and lift out the existing switch module.
- Replace the microswitch: Carefully remove the old microswitch from its module and insert the new one.
- Install the hot-swap system: Insert the front end of the module at an angle, then press down to install it securely.
The G23 series is compatible with 99% of micro-movement switches available in the market.
Video: This video demonstrates the process of replacing micro switches in a mouse, showcasing the hot-swap feature.
7. Troubleshooting
7.1 Responsiveness Issues
If you experience occasional drops in mouse responsiveness, such as the cursor becoming 'floaty' or overshooting inconsistently, consider the following:
- Interference: Ensure the mouse is within 20 cm of its wireless receiver and at least 2 meters away from 2.4 GHz interference sources (e.g., Wi-Fi routers, cordless phones).
- Battery Level: Check the mouse's battery level. Low battery can affect wireless performance. The mouse supports fast charging.
- Surface: Use the mouse on a clean, uniform surface. Uneven or reflective surfaces can interfere with the optical sensor.
- DPI/Polling Rate: Experiment with different DPI and polling rate settings. Higher polling rates consume more battery and might be more susceptible to interference in certain environments.
- Firmware Update: Check the official Mechkeys website for any available firmware updates for your G23 Series mouse.
8. Product Specifications
Below are the technical specifications for the Mechkeys Incott G23 Series Gaming Mouse:
Image: Detailed specifications and dimensional overview of the G23 Series mouse.
- DPI Settings: 400 / 800 / 1600 / 2400 / 3200 / 6400
- Polling Rate Settings:
- 1K: 125 / 250 / 500 / 1000 Hz
- 8K: 125 / 250 / 500 / 1000 / 2000 / 4000 / 8000 Hz
- Battery Life: About 1000 hours (~143 days) at 1K polling rate. Higher polling rates will reduce battery life.
- Weight: Approximately 65 grams
- Sensor: G23 PAW3395 / G23 Pro PAW3950ES-KING
- Interface: USB/Type-C
- Cable Length: Approximately 1.8 meters
- Rated Voltage: 5V 500mA
- Connection Method: 2.4G Wireless, Wired
- Side Buttons: Kailh Transparent Silent Red Switch (Customized Special Adjustment)
- Acceleration: 50G
- IPS: G23 650 / G23 Pro 750
- LOD (Lift-Off Distance): G23 1.2 (Adjustable 1.2mm) / G23 Pro 0.7-1.2mm (Three Levels Adjustable)
- Scroll Wheel: TTC Gold Encoder
- Feet: 100% PTFE Reinforced Version
- Surface Coating: Rubber-like Paint
- Recommended Hand Size: 17~19cm or less [Medium-Sized Hand Grip]
- Dimensions: Length 126mm x Width 63.5mm x Height 40mm
9. Warranty and Support
For warranty information, technical support, or further assistance, please visit the official Mechkeys website or contact their customer service. Keep your purchase receipt as proof of purchase.
Official Mechkeys Store: Mechkeys Amazon Store