1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C65A 2-Speed Vinyl Record Player Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity. Keep this manual for future reference.
Image 1.1: The Crosley C65A Turntable with its accompanying 50W speakers.
2. What's in the Box
Carefully unpack all components and ensure you have the following items:
- Turntable Unit
- Turntable Lid (Dust Cover)
- Turntable Platter
- Rubber Slipmat
- 45 RPM Adapter
- Tonearm Counterweight
- Drive Belt
- Power Adapter
- Speakers (2 units)
- Speaker Wires (2 units)
- Cartridge Alignment Protractor
3. Setup Instructions
Follow these steps to set up your turntable:
- Placement: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.
- Platter Installation: Carefully place the turntable platter onto the center spindle.
- Drive Belt Installation: Locate the drive belt. Gently stretch the belt around the inner rim of the platter and then around the motor pulley. Ensure the belt is not twisted.
- Slipmat Placement: Place the rubber slipmat on top of the platter.
- Cartridge and Tonearm: The Audio-Technica moving magnet cartridge is pre-mounted. If necessary, use the included cartridge alignment protractor for fine-tuning.
- Counterweight Adjustment: Attach the tonearm counterweight to the rear of the tonearm. Adjust it according to the instructions provided with the cartridge or general turntable setup guides to achieve the recommended tracking force.
- Dust Cover: Attach the clear dust cover to the hinges at the back of the turntable.
- Speaker Connection: Connect the two included speakers to the speaker terminals on the rear of the turntable using the provided speaker wires. Ensure correct polarity (positive to positive, negative to negative).
- Power Connection: Connect the power adapter to the DC IN port on the rear of the turntable, then plug it into a wall outlet.
Image 3.1: Top view of the turntable, illustrating the platter and tonearm area for belt installation.
Image 3.2: Close-up of the pre-mounted Audio-Technica cartridge.
4. Operating Instructions
This section details how to operate your Crosley C65A turntable.
Image 4.1: Front panel controls of the turntable.
- Power On/Off: Turn the 'ON/OFF' knob clockwise to power on the unit. Turn it counter-clockwise to power off.
- Playing a Record:
- Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
- Select the appropriate speed (33 1/3 or 45 RPM) using the speed selector switch.
- Gently lift the tonearm using the cueing lever.
- Position the tonearm over the desired track on the record.
- Lower the cueing lever to gently drop the stylus onto the record.
- Adjust the 'VOLUME' knob to your desired listening level.
- Use the 'PITCH' control knob to fine-tune the playback speed if needed.
- Stopping Playback: Lift the tonearm using the cueing lever, return it to the tonearm rest, and lower the cueing lever.
Image 4.2: Detail of the tonearm and pitch control.
5. Bluetooth Connectivity
The Crosley C65A features a built-in Bluetooth receiver, allowing you to stream music from your mobile device through the turntable's speakers.
- Activate Bluetooth: Ensure the turntable is powered on. The Bluetooth indicator light will typically blink, indicating it is in pairing mode.
- Pairing: On your mobile device, enable Bluetooth and search for available devices. Select "Crosley C65A" from the list.
- Connection Confirmation: Once paired, the Bluetooth indicator light on the turntable will become solid. You can now stream audio from your device to the turntable's speakers.
Image 5.1: Bluetooth streaming from a mobile device to the turntable.
6. External Connections
The turntable offers various connection options for integration with existing audio systems.
Image 6.1: Rear panel connections.
- RCA Output (PHONO/LINE): Use the RCA output jacks to connect the turntable to an external amplifier or powered speakers.
- Switchable Preamp: The turntable features a built-in switchable preamp. Use the PHONO/LINE switch to select the appropriate output level:
- Set to LINE if connecting to an amplifier's auxiliary input or powered speakers that do not have a dedicated phono input.
- Set to PHONO if connecting to an amplifier with a dedicated phono input (which includes its own preamp).
7. Maintenance
Regular maintenance helps preserve the performance and appearance of your turntable.
- Cleaning the Unit: Wipe the turntable and dust cover with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Stylus Care: The stylus (needle) is a delicate component. Use a soft brush designed for stylus cleaning to gently remove dust and debris. Brush from back to front.
- Record Care: Keep your records clean and free of dust. Store them vertically in their sleeves to prevent warping.
- Belt Replacement: The drive belt may need replacement after extended use. Refer to the manufacturer's guidelines for replacement parts and instructions.
8. Troubleshooting
If you encounter issues, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected; outlet not active | Ensure power adapter is securely connected and plugged into a working outlet. |
| No sound from speakers | Speakers not connected; volume too low; incorrect input selected (if using external amp) | Check speaker wire connections; increase volume; ensure correct PHONO/LINE setting or input on external amplifier. |
| Sound distorted or skipping | Dirty record/stylus; incorrect tracking force; turntable not level; damaged stylus | Clean record and stylus; adjust counterweight for proper tracking force; ensure turntable is on a level surface; replace stylus if damaged. |
| Turntable speed incorrect | Incorrect speed selected; pitch control misadjusted; worn drive belt | Verify speed selector (33/45 RPM); adjust pitch control; inspect and replace drive belt if worn. |
| Bluetooth not pairing | Turntable not in pairing mode; device too far; interference | Ensure turntable is powered on and Bluetooth indicator is blinking; move device closer; restart both devices. |
9. Specifications
Key technical specifications for the Crosley C65A Turntable:
- Model Name: C65A
- Product Dimensions: 14.5"L x 29"W x 8.25"H
- Item Weight: 22.2 pounds
- Brand: Crosley
- Maximum Rotational Speed: 45 RPM (also supports 33 1/3 RPM)
- Special Feature: Built-In Bluetooth Receiver
- Material: Plastic (with Walnut finish)
- Included Components: Turntable, Turntable Lid, Turntable Platter, Rubber Slipmat, 45 RPM Adapter, Tonearm Counterweight, Drive Belt, Power Adapter, Speakers (2), Speaker Wires (2), Cartridge Alignment Protractor
- Cartridge: Pre-mounted Moving Magnet Audio-Technica Cartridge
- Speaker Output: 50W Peak, 40W RMS, 20W RMS x 2
- Frequency Response: 20Hz - 20KHz
- Max Power Consumption: 60 watts
10. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Crosley website. Crosley products are designed in the USA and come with USA-based customer support.
Return Policy: This product typically has a 30-day return policy for refund or replacement, subject to retailer terms.
