Introduction
Thank you for choosing the NutriBullet Flip NBP016B Portable Blender. This manual provides essential information for the safe and efficient use of your new portable blender. Please read all instructions carefully before first use and retain this manual for future reference.
Important Safeguards
When using any electrical appliance, basic safety precautions should always be followed. Failure to do so may result in serious injury or damage to the appliance.
- Read all instructions before operating the NutriBullet Flip.
- Keep the appliance and its cord out of reach of children.
- Do not immerse the motor base in water or other liquids. Clean with a damp cloth only.
- Ensure the blade assembly is securely attached to the cup before blending.
- Avoid contact with moving parts.
- Do not blend hot liquids, as pressure buildup can cause injury.
- Do not overfill the cup beyond the MAX line.
- Always charge the blender using the provided USB-C cable.
- Do not operate the blender if any part is damaged. Contact customer support for assistance.
What's Included
Your NutriBullet Flip NBP016B package includes the following components:
- Rechargeable 11.1V Motor Base
- Stainless Steel Blade Assembly
- 590 ml Insulated Stainless Steel Cup
- Travel Lid with Handle
- Sip & Straw Lid
- Blade Cover
- Cleaning Brush
- Stainless Steel Straw
- USB-C Charging Cable
Assembly and Initial Setup
1. Charging the Blender
Before first use, fully charge your NutriBullet Flip. A full charge provides power for approximately 14 blending cycles of 30 seconds each.
- Locate the USB-C charging port on the motor base.
- Connect the provided USB-C cable to the port and plug the other end into a compatible USB power adapter (not included).
- The indicator light will illuminate during charging and turn off when fully charged.
2. Assembling the Blender
Follow these steps to assemble your blender for use:
- Place your ingredients into the 590 ml insulated cup. Do not exceed the MAX fill line.
- Align the blade assembly with the top of the cup and twist clockwise until securely tightened.
- Invert the cup so the blade assembly is at the bottom, then align the blade assembly with the motor base and twist clockwise until it locks into place.
Operating Instructions
1. Blending Your Ingredients
The NutriBullet Flip is designed to blend a variety of ingredients, including ice and frozen fruits, for smoothies and shakes.
- Ensure the blender is fully assembled and charged.
- Press the power button on the motor base to start blending. The blender will run for a preset cycle (typically 30 seconds).
- For optimal results, shake the blender gently during operation if ingredients are thick or stuck.
- Do not continuously blend for more than 30 seconds at a time. Allow the motor to rest between cycles.
2. Using the Insulated Cup
The double-walled stainless steel cup keeps your beverages cold for up to 24 hours, making it ideal for on-the-go use.
3. Using the Lids
Your NutriBullet Flip comes with two convenient lids:
- Sip & Straw Lid: Features a flip-top opening for direct drinking and a slot for the included stainless steel straw.
- Travel Lid with Handle: Designed for secure transport, featuring a robust handle for easy carrying.
4. Portability
The compact design and integrated handle make the NutriBullet Flip easy to carry and fit into car cup holders, ensuring your healthy drinks are always with you.
Care and Maintenance
1. Cleaning
Proper cleaning ensures the longevity and hygiene of your NutriBullet Flip.
- Motor Base: Wipe the motor base with a damp cloth. Never immerse it in water.
- Blade Assembly: Carefully rinse the blade assembly under running water. Use the provided cleaning brush to remove any residue. Be cautious around the sharp blades.
- Cups and Lids: Wash the insulated cup, lids, and straw with warm, soapy water. They are not dishwasher safe.
- Ensure all parts are thoroughly dry before reassembling or storing.
2. Storage
Store the NutriBullet Flip in a clean, dry place when not in use. Ensure the battery is partially charged if storing for extended periods.
Troubleshooting
If you encounter issues with your NutriBullet Flip, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on or blend. | Low battery, improper assembly, or motor overload. | Ensure the unit is fully charged. Check that the blade assembly and cup are securely twisted onto the motor base. Reduce ingredients if overloaded. |
| Ingredients are not blending smoothly. | Too little liquid, too many solid ingredients, or ingredients are stuck. | Add more liquid. Reduce the amount of solid ingredients. Gently shake the blender during operation to dislodge ingredients. |
| Leakage from the cup. | Lid or blade assembly not properly sealed. | Ensure the blade assembly is tightly screwed onto the cup and the lid is securely closed. Check the silicone gasket for proper placement. |
| Charging indicator light not working. | Cable not connected properly or power source issue. | Verify the USB-C cable is firmly connected to both the blender and the power adapter. Try a different USB power source. |
If the problem persists after trying these solutions, please contact customer support.
Product Specifications
| Feature | Specification |
|---|---|
| Brand | NutriBullet |
| Model Number | NBP016B |
| Color | Black |
| Product Dimensions (L x W x H) | 10.8D x 10.8W x 23.2H cm (approx. 35.6 x 45.6 x 38.8 cm packaged) |
| Capacity | 590 Milliliters |
| Power | 120 Watts |
| Voltage | 7.4V (Motor Base: 11.1V) |
| Material | Stainless Steel |
| Automatic Shut-off Function | Yes |
| Number of Speeds | 1 |
| Item Weight | 1.5 Kilograms |
| Recommended Uses | Juices, Mixing, Protein Shakes |
| Power Source | Battery Powered |
Customer Support
For further assistance, product inquiries, or warranty information, please visit the official NutriBullet website or contact their customer service department. Refer to your product packaging for specific contact details.
You can also visit the NutriBullet Brand Store on Amazon for more information.
