Redsack PB-E3 Electric Portable Bidet Instruction Manual

Introduction

Thank you for choosing the Redsack PB-E3 Electric Portable Bidet. This device is designed to provide effective and convenient personal hygiene, whether you are traveling, camping, or simply seeking enhanced cleanliness. Its compact, rechargeable design ensures reliable performance wherever you go.

What's in the Box

• Redsack PB-E3 Electric Portable Bidet Unit
• USB-C Charging Cable
• Elegant Storage Box
• User Manual

Setup

1. Initial Charging

Before first use, fully charge the bidet. The device features a 2000mAh rechargeable lithium battery, providing approximately 200+ full flushes on a single charge. A quick 1-minute charge via USB-C can provide enough power for two uses.

1. Locate the USB-C charging port at the bottom of the bidet, protected by a silicone cover.
2. Gently lift the silicone cover and insert the provided USB-C charging cable.
3. Connect the other end of the cable to a compatible USB power source.
4. The indicator light will show charging status (refer to the device for specific light patterns).
5. Once fully charged, disconnect the cable and ensure the silicone cover is securely closed to maintain waterproofing.

Figure 1: Connecting the USB-C charging cable to the bidet.

2. Filling the Water Reservoir

The bidet has a 200 ml water capacity, designed for effective cleaning while conserving water. Its leak-proof design allows you to pre-fill it before heading out.

1. Locate the flip-open lid on the top of the bidet.
2. Open the lid and fill the reservoir with clean water.
3. Close the lid securely to prevent leaks.

Figure 2: Filling the bidet's water reservoir.

Operating Instructions

1. Powering On and Off

The bidet features an automatic power-on mechanism and accidental activation protection.

1. To power on, extend the nozzle handle beyond 150 degrees. The device will automatically activate.
2. To power off, fold the nozzle handle back into its stowed position. This action locks the switch, preventing accidental spraying.

Figure 3: Bidet with nozzle extended, ready for use.

2. Adjusting Water Pressure

The Redsack PB-E3 offers two customizable pressure levels: High and Low.

1. After powering on, press the 'M' (Mode) button to cycle between High and Low pressure settings.
2. Select the desired pressure for a comfortable and effective cleaning experience.

3. Usage

The bidet's high-pressure cleaning system provides thorough cleaning for various personal hygiene needs, including wound care, baby/pregnancy care, hemorrhoid cleaning, and elderly care.

1. Ensure the reservoir is filled and the nozzle is extended.
2. Position the nozzle as needed for cleaning.
3. Press the power button to initiate water flow.
4. Adjust pressure using the 'M' button if desired.
5. Release the power button to stop water flow.

Figure 4: Versatile applications of the Redsack PB-E3 bidet.

Maintenance

Cleaning

• After each use, empty any remaining water from the reservoir.
• Rinse the reservoir and nozzle with clean water.
• Wipe the exterior of the bidet with a soft, damp cloth. Do not use abrasive cleaners.

Storage

Store the bidet in its elegant storage box to protect it from external pollution, bumps, and to extend its service life. The compact design ensures it takes up minimal space.

Figure 5: Storing the bidet in its protective case.

Troubleshooting

Specifications

• Model Number: PB-E3
• Brand: Redsack
• Product Dimensions: 2.76 x 2.76 x 7.09 inches
• Item Weight: 12.63 ounces
• Battery: 1 Lithium Metal battery (included), 2000mAh
• Charging: USB-C
• Water Capacity: 200 ml (approx. 6.8 oz)
• Pressure Levels: High, Low

Warranty and Support

For warranty information, product support, or to inquire about returns, please contact Redsack customer service directly. Refer to your purchase documentation for specific contact details or visit the official Redsack website.

Return Policy: This product is subject to a 30-day refund/replacement policy from the date of purchase.