SweetLF SWS7105 Electric Rotary Shaver User Manual

Important Safety Information

Please read all instructions carefully before using the SweetLF SWS7105 Electric Rotary Shaver. Keep this manual for future reference.

• Always unplug the shaver and allow it to dry completely before use.
• Never use the shaver while it is charging.
• Exercise caution when handling the shaver to prevent cuts from the sharp blades.
• After each use, clean the shaver thoroughly and allow it to dry completely to prevent bacterial growth.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the shaver yourself. Contact customer support for assistance.

Product Features

The SweetLF SWS7105 Electric Rotary Shaver is designed for a comfortable and efficient shaving experience. Key features include:

• 360° Floating Head: Adapts to facial contours for a close shave.
• Long-Lasting Battery: Up to 120 minutes of shaving time on a 60-minute charge.
• Type-C Charging: Fast and convenient charging.
• IPX7 Waterproof: Suitable for wet or dry shaving and easy cleaning under running water.
• Pop-Up Trimmer: For precise detailing of sideburns and necklines.
• Quiet Operation: Low-noise motor (below 60 dB) for a gentle experience.

Image: The 3D flexible floating head adapts to facial contours for an effective shave.

Image: USB-C rechargeable with 120 minutes runtime on a 1-hour charge.

Image: The shaver is fully washable and IPX7 waterproof, allowing immersion up to 1 meter for 30 minutes.

Image: Pop-up trimmer for precision edging of mustaches and sideburns.

Package Contents

Verify that all items are present in the package:

• SweetLF SWS7105 Electric Rotary Shaver
• USB Type-C Charging Cable
• Cleaning Brush
• Protective Cap
• User Manual

Setup

Charging the Shaver

1. Ensure the shaver is dry before charging.
2. Connect the USB Type-C charging cable to the charging port at the bottom of the shaver.
3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
4. The LED battery indicator lights on the shaver will illuminate and show the charging progress. A full charge typically takes 60 minutes.
5. Once fully charged, all indicator lights will be solid. Disconnect the charging cable.

Note: The shaver supports "plug-and-play" functionality, allowing corded use while charging, but it is recommended to use it cordless for optimal performance and safety.

Operation

Basic Shaving

1. Remove the protective cap from the shaver head.
2. Press the power button to turn on the shaver.
3. For a dry shave, hold the shaver at a right angle to your skin and move it in small, circular motions against the direction of hair growth.
4. For a wet shave, apply shaving foam or gel to your face before shaving. The shaver is IPX7 waterproof and can be used in the shower.
5. Apply gentle pressure; do not press too hard, as this can cause irritation.
6. After shaving, press the power button to turn off the shaver.

Image: The shaver supports both wet shaving with foam/gel and dry shaving.

Using the Pop-Up Trimmer

1. Locate the pop-up trimmer switch on the back of the shaver.
2. Slide the switch upwards to activate the trimmer.
3. Use the trimmer for precise shaping of sideburns, mustaches, and necklines.
4. After use, slide the switch downwards to retract the trimmer.

Maintenance

Cleaning the Shaver

Regular cleaning ensures optimal performance and hygiene.

1. Turn off the shaver and disconnect it from any charging cable.
2. Press the release button on the shaver head to open it.
3. Rinse the shaver head under running tap water to remove hair clippings and debris. You can also use the provided cleaning brush for stubborn particles.
4. Shake off excess water and leave the shaver head open to air dry completely before closing it or attaching the protective cap.
5. For a deeper clean, the rotary blades can be carefully removed and rinsed individually. Refer to the diagrams in the printed user manual for detailed instructions on blade removal and reassembly.

Replacing Shaving Heads

For continued optimal performance, it is recommended to replace the shaving heads every 12 months, or sooner if you notice a decrease in shaving efficiency or increased irritation.

1. Turn off the shaver and open the shaver head.
2. Carefully remove the old shaving heads by twisting or lifting them according to the diagrams in the full user manual.
3. Insert new SweetLF SWS7105 compatible shaving heads, ensuring they click securely into place.
4. Close the shaver head.

Troubleshooting

• Shaver not turning on: Ensure the shaver is charged. If it's charged, check if the travel lock is activated (usually indicated by a lock icon on the display). Press and hold the power button for 3 seconds to deactivate the travel lock.
• Poor shaving performance/pulling hair: The shaving heads may be dirty or worn. Clean the shaver head thoroughly. If performance does not improve, consider replacing the shaving heads.
• Battery not charging: Ensure the USB-C cable is properly connected to both the shaver and the power source. Try a different USB power adapter or cable.
• Skin irritation: Ensure you are not applying too much pressure. Shave against the direction of hair growth. For sensitive skin, try wet shaving with foam or gel.

Specifications

Warranty and Support

SweetLF offers a 2-year Protect Plan for the SWS7105 Electric Rotary Shaver. For any product inquiries, technical assistance, or warranty claims, please contact SweetLF customer support.

• Lifetime Technical Help: Assistance available for the lifespan of your product.
• Free Return, 100% Refund: Refer to the purchase platform's return policy for details.
• 24/7 Fast Support: Contact information can be found on the official SweetLF website or through your purchase platform.

Image: SweetLF provides comprehensive customer support and a 2-year protection plan.