Bell+Howell 6445

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Bell+Howell Elegant Cordless Table Lamps (Model 6445)

Instruction Manual

Introduction

Thank you for choosing the Bell+Howell Elegant Cordless Table Lamps. This manual provides essential information for the safe and efficient operation of your new lamps. These rechargeable LED lamps offer touch activation, dimming capabilities, and three distinct light settings, designed for versatile indoor use.

Two Bell+Howell Elegant Cordless Table Lamps on a wooden surface, with insets showing warm, white, and daylight settings.

Image: Two Bell+Howell Elegant Cordless Table Lamps demonstrating different light settings.

A Bell+Howell Cordless Table Lamp shown in various settings: bedroom, bar, dining table, restaurant, living room, and outdoors.

Image: The Bell+Howell lamp used in diverse environments, highlighting its portability.

What's in the Box

Your package should contain the following items:

  • 2 x Bell+Howell Elegant Cordless Table Lamps
  • 2 x USB-C Charging Cables (31.5 inches each)
A Bell+Howell Cordless Table Lamp on a table with a couple in the background, showing a USB-C cable for charging.

Image: The Bell+Howell lamp with its USB-C charging cable.

Setup

  1. Initial Charge: Before first use, fully charge both lamps. Connect the provided USB-C cable to the charging port on the lamp and plug the other end into a compatible USB power adapter (not included). The charging time is approximately 3.5 to 4.5 hours.
  2. Placement: Place the lamps on a stable, flat surface. These lamps are designed for indoor use.
A Bell+Howell Cordless Table Lamp with dimensions 7.67 inches height and 4.8 inches width, also indicating 3.5-4.5 hour charge time and 4.5-5.5 hour run time.

Image: Lamp dimensions and battery performance details.

Operating Instructions

  1. Power On/Off: Gently tap the top surface of the lamp to turn it on or off.
  2. A hand tapping the top of a Bell+Howell Cordless Table Lamp to turn it on.

    Image: Demonstrating the touch activation feature.

  3. Change Light Settings: With the lamp on, tap the top surface repeatedly to cycle through the three available light modes:
    • Warm Light: For a cozy and inviting ambiance.
    • White Light: A neutral, bright illumination.
    • Daylight: Simulates natural outdoor light.
  4. Three Bell+Howell Cordless Table Lamps, each displaying a different light setting: White, Warm, and Natural Daylight.

    Image: The three distinct light settings: White, Warm, and Natural Daylight.

  5. Adjust Brightness (Dimming): To dim or brighten the light, tap and hold your finger on the top surface of the lamp. The brightness will gradually change. Release your finger when the desired brightness level is reached.
  6. A Bell+Howell Cordless Table Lamp shown at a dim setting on the left and a bright setting on the right, illustrating the dimmable feature.

    Image: Comparison of dim and bright light settings.

Maintenance

  • Cleaning: To clean the lamp, ensure it is turned off and disconnected from any charging cable. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
  • Storage: When not in use for extended periods, store the lamp in a cool, dry place. It is recommended to fully charge the lamp before storing and to recharge it every few months to maintain battery health.
  • Battery Care: Avoid fully depleting the battery frequently. Recharge the lamp when the light output noticeably diminishes.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.Battery is depleted.Charge the lamp using the provided USB-C cable.
Lamp does not respond to touch.Insufficient contact or internal issue.Ensure firm and direct contact with the touch surface. If the issue persists after charging, contact customer support.
Light output is dim or inconsistent.Low battery or dimming setting.Recharge the lamp. Tap and hold the touch surface to adjust brightness.
Lamp wobbles on a flat surface.Uneven base or surface.Ensure the lamp is placed on a completely flat and stable surface. Inspect the lamp's base for any irregularities.

Specifications

FeatureDetail
BrandBell+Howell
Model NameBell+Howell Table Lamp 2Pack (Model 6445)
Product Dimensions4.8"D x 4.8"W x 7.67"H
Item Weight2.4 pounds (for the set)
Light Source TypeLED
Power SourceBattery Powered (Rechargeable via USB-C)
Special FeaturesColor Changing (3 modes), Dimmable, Lightweight, Rechargeable, Touch Activated
MaterialIron (Base), Plastic (Shade)
Finish TypeMatte
Indoor/Outdoor UsageIndoor
Charge Time3.5 - 4.5 Hours
Run Time4.5 - 5.5 Hours (depending on brightness setting)

Warranty Information

Bell+Howell products are designed for reliability and performance. For specific warranty details regarding your Elegant Cordless Table Lamps, please refer to the warranty card included with your purchase or visit the official Bell+Howell website. Keep your proof of purchase for any warranty claims.

Customer Support

If you have any questions, require assistance, or encounter issues not covered in this manual, please contact Bell+Howell customer support. Contact information can typically be found on the product packaging or the official Bell+Howell website.

Online Resources: For additional information and support, you may visit the Bell+Howell Store on Amazon.

© 2024 Bell+Howell. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.