iiyama Prolite XUB2793QSU-B7 27-inch IPS Monitor User Manual

Introduction

This manual provides essential information for the safe and efficient operation of your iiyama Prolite XUB2793QSU-B7 monitor. This 27-inch IPS LCD monitor features WQHD (2560x1440) resolution, a 100Hz refresh rate, 1ms response time, AdaptiveSync technology, a built-in USB 3.2 Hub, and a height-adjustable stand. Please read this manual thoroughly before using the product and retain it for future reference.

Setup

1. Unpacking

Carefully remove all components from the packaging. Ensure all items listed below are present:

• iiyama Prolite XUB2793QSU-B7 Monitor
• Power Cable
• HDMI Cable
• DisplayPort Cable
• USB Upstream Cable
• Stand Base and Neck
• User Manual (this document)

2. Stand Assembly

To assemble the monitor stand:

1. Place the monitor face down on a soft, clean surface to prevent scratches.
2. Attach the stand neck to the back of the monitor, aligning the mounting holes. Secure it with the provided screws.
3. Attach the stand base to the bottom of the stand neck. Tighten the thumb screw or screws securely.

Image: Front view of the iiyama Prolite XUB2793QSU-B7 monitor with its height-adjustable stand assembled, showing the screen and base.

3. Connecting Cables

Connect the necessary cables to the monitor and your computer:

• Power Connection: Connect the power cable to the monitor's power input and then to a power outlet.
• Video Connection: Connect either the HDMI cable or the DisplayPort cable from your computer's video output to the corresponding input on the monitor.
• USB Upstream Connection: To enable the monitor's USB hub, connect the USB upstream cable (Type-B to Type-A) from the monitor's USB upstream port to an available USB port on your computer.
• Audio Connection (Optional): If using external speakers or headphones, connect them to the monitor's headphone jack.

Image: Rear view of the iiyama Prolite XUB2793QSU-B7 monitor, highlighting the power, HDMI, DisplayPort, and USB input ports.

Operating Instructions

1. Power On/Off

Press the power button, typically located on the bottom right side of the monitor, to turn the monitor on or off. The power indicator light will illuminate when the monitor is on.

2. On-Screen Display (OSD) Menu Navigation

The OSD menu allows you to adjust various monitor settings. Use the control buttons, usually located on the bottom right bezel, to navigate the menu.

Image: Close-up of the control buttons on the bottom right of the monitor, used for OSD menu navigation and power control.

• Press the Menu button to open the OSD.
• Use the Up/Down or Left/Right buttons to navigate through menu options.
• Press the Select/Enter button to confirm a selection or enter a sub-menu.
• Press the Exit button to go back or close the OSD.

3. Picture Settings

Adjust image quality settings via the OSD menu:

• Brightness: Adjusts the overall luminance of the screen.
• Contrast: Adjusts the difference between light and dark areas.
• Color Temperature: Selects preset color temperatures (e.g., Warm, Cool, User) or allows custom RGB adjustment.
• Gamma: Adjusts the tonal response curve of the display.
• Blue Light Reduction: Reduces blue light emission to minimize eye strain.
• OverDrive: Adjusts the response time for faster pixel transitions.

4. Input Selection

If multiple video sources are connected, use the OSD menu or a dedicated input select button to switch between HDMI and DisplayPort inputs.

5. Adaptive Sync

This monitor supports Adaptive Sync (FreeSync) technology. When connected to a compatible graphics card via DisplayPort or HDMI, Adaptive Sync synchronizes the monitor's refresh rate with the graphics card's frame rate, reducing screen tearing and stuttering. Ensure Adaptive Sync is enabled in both the monitor's OSD and your graphics card settings.

6. Audio Settings

The monitor includes built-in 2W speakers. Adjust the volume through the OSD menu or your computer's operating system. The headphone jack allows for private listening.

7. USB Hub Usage

The integrated USB 3.2 hub provides two downstream USB ports. Connect your peripherals (e.g., keyboard, mouse, USB drive) to these ports after connecting the USB upstream cable to your computer.

Maintenance

1. Cleaning the Screen

To clean the monitor screen:

• Turn off the monitor and unplug the power cord.
• Use a soft, lint-free cloth (e.g., microfiber) lightly dampened with water or a specialized screen cleaner.
• Gently wipe the screen. Do not apply excessive pressure.
• Avoid using alcohol, ammonia, or abrasive cleaners, as these can damage the screen surface.

2. General Care

To ensure the longevity of your monitor:

• Keep the monitor in a well-ventilated area.
• Avoid exposing the monitor to direct sunlight, high humidity, or extreme temperatures.
• Do not place heavy objects on the monitor or its cables.
• Unplug the monitor during lightning storms or when it will be unused for extended periods.

Troubleshooting

If you encounter issues with your monitor, refer to the following common solutions:

No Image on Screen

• Ensure the power cable is securely connected to both the monitor and the power outlet.
• Verify that the video cable (HDMI or DisplayPort) is firmly connected to both the monitor and your computer.
• Check if the monitor is powered on (power indicator light should be illuminated).
• Confirm that the correct input source is selected in the monitor's OSD menu.
• Restart your computer.

Poor Image Quality

• Ensure your computer's display resolution is set to the monitor's native resolution (2560 x 1440).
• Adjust brightness, contrast, and color settings in the OSD menu.
• Check the video cable for damage or loose connections.
• If using Adaptive Sync, ensure it is properly configured in both the monitor OSD and graphics card settings.

No Sound from Speakers/Headphone Jack

• Increase the volume level in the monitor's OSD menu and your computer's operating system.
• Ensure the audio output from your computer is directed to the monitor (e.g., 'iiyama XUB2793QSU' in sound settings).
• If using headphones, ensure they are fully plugged into the headphone jack.

Specifications

Key technical specifications for the iiyama Prolite XUB2793QSU-B7 monitor:

Warranty and Support

iiyama products are manufactured to high standards and are designed for reliability. This monitor is supported by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official iiyama website for detailed warranty terms and conditions specific to your region.

Spare parts for this model are available for a duration of 7 years within the EU. For technical support, driver downloads, or further assistance, please visit the official iiyama support website or contact their customer service department.

Official iiyama Website: www.iiyama.com