1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your BLOKEES Transformers Classic Class 08 Nemesis Prime model kit (Model CC08). This officially licensed model allows you to build a highly articulated figure of Nemesis Prime from the Transformers Rise of the Beasts series. Please read these instructions carefully before beginning assembly.
2. Safety Information
- Recommended Age: This model kit is recommended for ages 12 years and up.
- Small Parts Warning: This product contains small parts which may pose a choking hazard for children under 3 years of age. Keep all components out of reach of young children.
- Handling: Handle parts with care to avoid breakage. Do not apply excessive force during assembly.
- Disposal: Dispose of packaging materials responsibly.
3. Package Contents
Verify that all components are present before starting assembly. The package should contain:
- Nemesis Prime Figure components (various plastic runners)
- Accessory parts (weapons, display stand components)
- Instruction sheet
- 1 Nonstandard Battery (included for light-up features)
Figure 3.1: The product packaging for the BLOKEES Nemesis Prime model kit.
Figure 3.2: Overview of Nemesis Prime model kit components, including front and back views of the figure, various accessories, and the display stand.
4. Assembly Instructions
This model kit features an easy snap-together assembly process. No glue, cutters, or specialized tools are required. Follow the numbered steps on the included instruction sheet for detailed guidance.
- Unpack Components: Carefully remove all plastic runners and parts from the packaging. Identify the different sections (e.g., head, torso, arms, legs, weapons).
- Detaching Parts: Gently twist or snap parts from their runners. If a part is stubborn, apply slight pressure evenly. Avoid bending or forcing.
- Assemble Core Body: Begin by assembling the torso, then attach the head. Ensure all connections are secure.
- Attach Limbs: Connect the arm and leg components to the main body. Pay attention to the orientation of each part.
- Install Battery: Locate the battery compartment (typically in the chest or head) and insert the included nonstandard battery. Ensure correct polarity. This powers the light-up features.
- Assemble Accessories: Put together any weapons or additional parts as indicated in the instructions.
- Attach to Display Stand: If desired, assemble the display stand and attach the completed Nemesis Prime figure.
Tip: Refer to the visual diagrams on the instruction sheet for precise part identification and connection points.
Figure 4.1: The fully assembled Nemesis Prime figure, ready for display.
5. Operation & Posing
Your Nemesis Prime model features 20 points of articulation, allowing for a wide range of dynamic poses. The figure also includes built-in lights in its eyes and chest.
- Articulation: Gently manipulate the joints at the shoulders, elbows, wrists, hips, knees, and ankles to achieve desired poses. Avoid forcing joints beyond their natural range of motion to prevent damage.
- Light-Up Features: A small switch, typically located on the back or chest, activates the LED lights in the eyes and chest. Ensure the battery is correctly installed for this feature to function.
- Accessories: Attach weapons and other accessories to the figure's hands or designated attachment points.
Figure 5.1: Front and back views illustrating the articulation points and overall design of the Nemesis Prime figure.
Figure 5.2: Key features of the Nemesis Prime figure, highlighting its posability, glowing eyes and chest, and included special weapons.
6. Maintenance
- Cleaning: To clean the figure, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
- Battery Replacement: If the light-up features dim or stop working, replace the nonstandard battery with a new one of the same type. Refer to the assembly instructions for battery compartment location.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together. | Incorrect orientation or excess plastic on connection points. | Check the instruction diagrams for correct orientation. Gently remove any excess plastic (flash) if present, using a hobby knife if necessary (adult supervision recommended). |
| Joints are too loose/tight. | Manufacturing variance or improper assembly. | For loose joints, a thin layer of clear nail polish or a small piece of tape can be applied to the peg. For tight joints, gently work the joint back and forth or apply a tiny amount of silicone lubricant. |
| Light-up features not working. | Battery incorrectly installed or depleted. | Ensure the battery is inserted with correct polarity. Replace the battery if it is old or depleted. Check that the power switch is in the "ON" position. |
8. Specifications
- Model Number: CC08
- Product Dimensions: 10 x 6 x 3 inches (25.4 x 15.24 x 7.62 cm)
- Item Weight: 7.8 ounces (221 grams)
- Material: High-quality ABS plastic
- Articulation: 20 movable joints
- Power Source: 1 Nonstandard Battery (included for light-up features)
- Manufacturer Recommended Age: 12 years and up
- Release Date: November 6, 2024
- Manufacturer: BLOKEES
Figure 8.1: Approximate dimensions of the product packaging.
9. Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact BLOKEES customer support. Refer to the product packaging or the official BLOKEES website for contact information.
Please retain your proof of purchase for any warranty claims.