VINGLI Daybed with Pop Up Trundle (Model VDB-MTW) Instruction Manual

1. Safety Information

Please observe the following safety guidelines to ensure safe use of your VINGLI Daybed with Pop Up Trundle:

• The maximum weight limit for each sleeping surface (main daybed and trundle) is 330 pounds. Do not exceed this weight.
• Do not use with crib bumpers, comforters, or pillows that can pose an entrapment or suffocation risk for infants and young children. Always use appropriate bedding materials for the child's age and size.
• Ensure all bolts and screws are tightened securely before initial use and regularly check all connections to ensure they remain tight.
• Do not allow children to play on or under the trundle bed when it is being raised or lowered.
• Keep hands and fingers clear of moving parts during trundle operation.

2. Package Contents

Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

Included Components:

• Main Daybed Frame Sections (Headboard, Footboard, Side Rails)
• Pop Up Trundle Frame
• Metal Slats for both Daybed and Trundle
• Casters (Wheels for trundle)
• Guardrails (Integrated into daybed design)
• Assembly Hardware (Bolts, washers, nuts, Allen wrench)

3. Assembly Instructions

Assembly is required for this daybed. It is recommended that two people assemble this unit to ensure ease and safety. The estimated assembly time is approximately 2-3 hours.

Step 1: Unpack and Identify Parts

Carefully unpack all components from the packaging. Lay them out on a clean, soft surface (such as a carpet or blanket) to prevent scratches. Refer to the component list and diagrams (if provided in your physical manual) to identify each part.

Step 2: Assemble the Main Daybed Frame

Connect the headboard and footboard sections to the side rails using the provided bolts and the Allen wrench. Insert bolts through the designated holes and hand-tighten them initially. Do not fully tighten any bolts until the entire frame is assembled.

Image: Detail of the metal frame and slats, illustrating the robust construction of the daybed frame.

Step 3: Install Slats

Once the main frame is loosely assembled, place the metal slats onto the designated support rails. Secure them according to the instructions, typically by snapping them into place or using screws. Ensure all slats are evenly spaced and firmly attached.

Image: A view of the heavy-duty metal slats installed on the daybed frame, providing mattress support.

Step 4: Assemble the Pop-Up Trundle Frame

Assemble the trundle frame separately, attaching the casters (wheels) and any support legs as per the instructions. Ensure the pop-up mechanism is correctly aligned and moves freely.

Image: A close-up of a heavy-duty lockable wheel, highlighting the mobility and potential for securing the trundle.

Step 5: Integrate the Trundle

Carefully slide the assembled trundle frame under the main daybed frame. Test the pop-up mechanism to ensure it raises and lowers smoothly and locks securely into place.

Image: The VINGLI daybed with its pop-up trundle fully extended and raised, demonstrating its functionality as two twin beds.

Step 6: Final Tightening

Once all parts are assembled and properly aligned, go back and securely tighten all bolts and screws using the provided tools. Do not overtighten, as this can strip the threads or damage the frame. Ensure the daybed and trundle are stable before use.

4. Operating Instructions

Using the Daybed

The main daybed functions as a standard twin-size bed or a comfortable sofa. Place a twin mattress (not included) on the metal slats. The design allows it to blend into various room aesthetics.

Image: The daybed positioned in a room, illustrating its dual use as a bed and a seating area.

Using the Pop-Up Trundle

The pop-up trundle bed provides an additional twin-size sleeping surface, ideal for guests or maximizing space.

1. Pull Out: To deploy the trundle, gently pull the trundle frame from underneath the main daybed. The integrated casters allow for easy movement across the floor.
2. Pop Up: To raise the trundle to the same height as the main daybed, locate the lifting mechanism (typically a handle or lever) and lift firmly until it locks into place. Ensure it is fully locked before placing weight on it.
3. Lower: To lower the trundle, disengage the locking mechanism (refer to your physical manual for specific release points) and carefully push the trundle down until it is flat.
4. Store: Once lowered, push the trundle back under the main daybed for compact storage.

Image: A visual sequence demonstrating the transformation of the daybed from a single twin bed to two twin beds with the trundle popped up.

5. Maintenance

Proper maintenance will extend the life and appearance of your daybed.

• Cleaning: Wipe the metal frame with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by drying with a clean cloth. Avoid abrasive cleaners, harsh chemicals, or solvents, as these can damage the painted finish.
• Inspection: Periodically (e.g., every 3-6 months) check all bolts, screws, and connections to ensure they remain tight. Retighten if necessary to maintain stability and prevent squeaking.
• Caster Care: Keep the trundle casters free of debris, dust, and hair to ensure smooth operation. If the casters become stiff, a small amount of silicone spray lubricant can be applied.

6. Troubleshooting

Issue: Bed Frame is Noisy (Squeaking/Creaking)

• Solution: The most common cause of noise is loose connections. Check all bolts and screws on both the main daybed and trundle frames. Tighten them securely, but do not overtighten.
• Solution: Ensure that all metal slats are properly seated in their supports and are not rubbing against the frame or each other.

Issue: Trundle Does Not Slide Smoothly

• Solution: Check the casters (wheels) for any obstructions such as carpet fibers, dust, or debris. Clean them thoroughly.
• Solution: Ensure the floor surface is even and clear of obstacles.

Issue: Trundle Does Not Pop Up/Down Correctly

• Solution: Inspect the pop-up mechanism for any obstructions or damage. Ensure it is fully engaged when lifting and fully disengaged when lowering. Do not force the mechanism.

7. Specifications

8. Warranty Information

This VINGLI Daybed with Pop Up Trundle is typically covered by a 90-day easy return policy through the seller, VINGLI-Direct, from the date of purchase. This policy covers manufacturing defects and significant product issues.

For specific details regarding the warranty, including coverage terms and conditions, please refer to the product listing on the platform where you made your purchase or contact VINGLI customer support directly. Keep your proof of purchase for any warranty claims.

9. Customer Support

Should you require assistance with assembly, encounter missing or damaged parts, or have any other inquiries regarding your VINGLI Daybed, please contact VINGLI-Direct customer support.

Contact information can usually be found on the seller's page on the platform where you purchased the product. Please have your model number (VDB-MTW) and proof of purchase ready when contacting support.