Introduction
Thank you for choosing the Vieta Pro Goody 4 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it carefully to ensure optimal performance and longevity of your speaker.
Image: The Vieta Pro Goody 4 portable Bluetooth speaker, shown with water droplets, highlighting its waterproof design.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the supplied USB Type-C charging cable to the speaker's charging port and the other end to a compatible USB power adapter (not included). The LED indicator will show charging status.
2. Powering On/Off
Press and hold the power button located on the speaker to turn it on or off. A sound prompt will indicate the power status.
3. Bluetooth Pairing
- Ensure the speaker is powered on and in pairing mode (LED indicator will flash).
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Vieta Pro Goody 4" from the list.
- Once connected, the speaker will emit a confirmation sound, and the LED indicator will stop flashing.
4. True Wireless Stereo (TWS) Pairing
To achieve a more immersive sound experience, you can pair up to 99 Goody 4 speakers together using TWS technology.
- Ensure both speakers are powered on and not connected to any other Bluetooth device.
- On one speaker (this will be the primary speaker), press the TWS button. The speaker will enter TWS pairing mode.
- The primary speaker will automatically search for other Goody 4 speakers.
- Once connected, both speakers will emit a confirmation sound, and audio will play in stereo.
5. Aux-In Connection
For non-Bluetooth devices, connect an audio cable (3.5mm jack, not included) from your device's audio output to the speaker's AUX-IN port. The speaker will automatically switch to AUX mode.
Operation
Image: The Vieta Pro Goody 4 speaker, showing its side control buttons and integrated carrying strap.
1. Music Playback
- Bluetooth: Control playback (play/pause, skip tracks) directly from your connected device or using the speaker's control buttons.
- USB Playback: Insert a USB drive containing audio files into the USB port. The speaker will automatically detect and play the music.
- Aux-In: Play music from your connected device. Control playback from the source device.
2. Volume Control
Use the volume buttons on the speaker to adjust the playback volume. You can also control the volume from your connected device.
3. Call Handling
When connected via Bluetooth, the integrated microphone allows you to answer or end calls directly from the speaker. Press the play/pause button to answer or end a call.
4. Voice Control
The speaker is compatible with voice assistants like Alexa. Activate your device's voice assistant feature and speak commands through the speaker's microphone.
5. RGB Lighting
The speaker features RGB lighting. Refer to the specific button on the speaker (if present) or the accompanying quick start guide for instructions on how to change or disable the lighting effects.
Maintenance
Image: The Vieta Pro Goody 4 speaker demonstrating its IPX7 water resistance by being partially submerged in water.
1. Water Resistance (IPX7)
The Goody 4 speaker is IPX7 waterproof, meaning it can be submerged in water up to 1 meter for 30 minutes. Ensure all ports are securely closed before exposing the speaker to water. After exposure to water, dry the speaker thoroughly before charging or using any ports.
2. Cleaning
Clean the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the surface. Ensure the speaker is dry before storing or using.
3. Storage
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery periodically to maintain its health.
Troubleshooting
No Power
- Ensure the battery is charged. Connect the speaker to a power source using the USB Type-C cable.
- Press and hold the power button for a few seconds to ensure it's not just a short press.
No Sound
- Check the volume levels on both the speaker and your connected device.
- Ensure the speaker is correctly paired via Bluetooth or connected via Aux-In/USB.
- If using Bluetooth, try disconnecting and re-pairing the device.
Bluetooth Pairing Issues
- Ensure the speaker is within the Bluetooth range (typically 10 meters) of your device.
- Turn off and on Bluetooth on your device, then try pairing again.
- Clear the speaker from your device's Bluetooth history and re-pair.
- Ensure no other devices are actively connected to the speaker.
Short Battery Life
- Ensure the speaker is fully charged before use.
- High volume levels and continuous RGB lighting can reduce battery life.
- Battery performance may degrade over time with prolonged use.
Specifications
| Feature | Specification |
|---|---|
| Model Name | Goody 4 |
| Model Number | VM-BS48GR |
| Brand | Vieta Pro |
| Connectivity Technology | Bluetooth 5.3 |
| Speaker Output Power | 25 Watts |
| Battery Life | Up to 13 hours |
| Waterproof Rating | IPX7 |
| Dimensions (L x W x H) | 7.4 x 7.4 x 19.1 cm |
| Weight | 880 grams |
| Special Features | Anti-shock, USB Port, Wireless Speakers (TWS), Microphone, RGB Lighting |
| Compatible Devices | Smartphone, Tablet, Laptop, MP3 Player |
| Included Components | USB Type-C Charging Cable |
Image: A visual comparison of Vieta Pro speaker models, including the Goody 4, Easy 4, and Upper 4, illustrating their relative sizes.
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Vieta Pro website. You may also contact the seller, FRAMASON AUDIO SA, for assistance with your product.
