Introduction
Welcome to your new GenXenon MZ01 Smart Glasses. These innovative glasses combine stylish design with advanced audio technology, offering an open sound experience, UV400 polarized lenses, touch controls, and voice assistant integration. This manual will guide you through the setup, operation, and maintenance of your smart glasses to ensure optimal performance and enjoyment.
Product Overview
The GenXenon MZ01 Smart Glasses are designed for comfort and functionality, featuring high-definition nylon lenses and a lightweight frame. Below is a detailed look at the components and dimensions of your device.

Figure 1: Product Detail Structure. This image illustrates the key components of the smart glasses, including the high-definition nylon lenses for glare and UV protection, silicone nose pads for comfort, a durable and lightweight frame, magnetic charging ports on both temples, an integrated smart chip battery, and dual directional speakers for private audio.

Figure 2: Product Dimensions. This diagram provides precise measurements for the smart glasses, detailing the frame bridge, lens width and height, nose bridge, and temple length, ensuring a proper fit.
Setup
1. Charging the Glasses
Before initial use, fully charge your GenXenon MZ01 Smart Glasses. The glasses feature magnetic fast charging.
- Connect the magnetic charging cable to the charging ports located on each temple of the glasses.
- Plug the USB end of the cable into a compatible power source (e.g., computer USB port, USB wall adapter).
- A full charge from an empty battery takes approximately 1.5 hours. A 15-minute fast charge can provide 2-3 hours of music playback.
Video 1: Charging and Pairing Demonstration. This video demonstrates how to connect the magnetic charging cable to the smart glasses and the process for initial Bluetooth pairing with a device. It also shows the touch controls in action.
2. Bluetooth Pairing
To connect your smart glasses to your smartphone or other Bluetooth-enabled device:
- Ensure the glasses are charged and powered off.
- Simultaneously press and hold the touch areas on both temples for 5 seconds to power on the glasses and enter pairing mode. You will hear an audio prompt.
- On your device, go to Bluetooth settings and search for available devices.
- Select "MZ01" (or similar identifier) from the list to pair.
- Once paired, the glasses will automatically connect to your device in the future when powered on and within range.
Operating Instructions
The GenXenon MZ01 Smart Glasses feature intuitive touch controls for managing audio playback, calls, and voice assistant functions.

Figure 3: Basic Operation of Eyeglasses. This image details the touch control gestures for various functions: Power On (hold left and right touch area for 5s), Power Off (hold either touch area for 6s), Pause/Play (double-click left/right), Switch Songs (left 3x for previous, right 3x for next), Answer/Hang Up/Reject Call (double-click/hold 3s), and Voice Assistant (hold either touch area for 2s).
- Power On: Simultaneously press and hold the left and right glasses leg touch area for 5 seconds.
- Power Off: Press and hold either touch area of the glasses' leg for 6 seconds.
- Pause or Play: Double-click the left/right touch key.
- Switch Songs: Triple-click the left touch key for the previous song; triple-click the right touch key for the next song.
- Answer Call: Double-click the left/right touch key during an incoming call.
- Hang Up Call: Double-press the left/right touch key during a call.
- Reject Call: Click and hold the left/right touch key for 3 seconds during an incoming call.
- Voice Assistant: Press and hold either touch area for 2 seconds to activate your device's voice assistant (e.g., Siri, Google Assistant).
Audio Experience
The MZ01 Smart Glasses feature an open sound design with high-quality speakers, providing clear binaural calls and audio playback without blocking ambient sounds. This allows you to remain aware of your surroundings while enjoying your content.

Figure 4: Built-in Mic & Speakers. The smart glasses integrate a microphone and speakers, enabling users to listen to audio and make calls while maintaining awareness of their environment.
Maintenance
Proper care will extend the life and performance of your GenXenon MZ01 Smart Glasses.
- Cleaning: Use the provided cleaning cloth to gently wipe the lenses and frame. Avoid using abrasive materials or harsh chemicals.
- Water Resistance: The glasses have an IP6 waterproof rating, protecting them from domestic water splashes and sweat. They are suitable for outdoor sports but should not be submerged in water.

Figure 5: IP6 Waterproof Performance. This image demonstrates the smart glasses' resistance to sweat and splashes, making them suitable for various outdoor activities.
Troubleshooting
If you encounter any issues with your GenXenon MZ01 Smart Glasses, please refer to the following common solutions:
- No Power: Ensure the glasses are fully charged using the magnetic charging cable.
- Cannot Pair: Make sure Bluetooth is enabled on your device and the glasses are in pairing mode (indicated by an audio prompt after holding touch areas for 5 seconds). Try restarting both the glasses and your device.
- No Audio: Check the volume levels on both your connected device and the glasses. Ensure the glasses are properly paired.
- Poor Call Quality: Ensure you are in an area with good network coverage. The open-ear design means others nearby may hear your conversation.
- Touch Controls Unresponsive: Ensure your fingers are clean and dry. Try restarting the glasses.
For persistent issues, please contact GenXenon customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Name | MZ01 Smart glasses |
| Brand | GenXenon |
| Connectivity Technology | Bluetooth 5.1 |
| Wireless Communication Standard | Bluetooth |
| Battery Type | Lithium Polymer (2 included) |
| Battery Life (Continuous Use) | 4-6 hours |
| Standby Time | Over 72 hours |
| Fast Charging | 15 minutes for 2-3 hours music playback |
| Waterproof Rating | IP6 |
| Item Weight | 120 Grams (4.2 ounces) |
| Operating System | Android Wear 1.0 (compatible with Android/iOS) |
| Special Feature | Lightweight, Open Sound Experience, Touch Control, Voice Assistant |
| Lens Type | UV400 Polarized Nylon Lenses |
What's in the Box
Your GenXenon MZ01 Smart Glasses package includes:
- GenXenon MZ01 Smart Glasses
- Magnetic Charging Cable
- Instruction Manual (this document)
- Cleaning Cloth
- Glasses Case
- Eyeglasses Storage Bag

Figure 6: Package Contents. This image displays all items included in the product packaging, ensuring you have everything needed to get started.
Warranty and Support
For warranty information, product registration, or technical support, please refer to the official GenXenon website or contact their customer service directly. Details can typically be found on the product packaging or the manufacturer's official online resources.