Farmhouse Nightstand with Gun Drawer and 3 Large Storage Drawers

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your FREDEES Farmhouse Nightstand. Designed for functionality and security, this nightstand features ample storage, a smart charging station, and integrated lighting with human sensor capabilities. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Safety Information

To ensure safe operation and prevent damage, observe the following precautions:

• Ensure all components are securely fastened during assembly to prevent tipping or collapse.
• Do not exceed the recommended weight limits for drawers and the top surface to maintain stability.
• The hidden drawer is designed for secure storage of personal valuables. Always ensure the locking mechanism is engaged when storing sensitive items.
• Keep electrical components (charging station, LED lights) away from water or excessive moisture.
• Use only the provided power adapter and cables for the charging station and lighting features.
• Keep small parts and assembly hardware out of reach of children.

Package Contents

Verify that all parts are present before beginning assembly. Refer to the included parts list in your packaging for detailed component identification. Typical contents include:

• Nightstand panels (top, bottom, sides, back)
• Drawer components (fronts, sides, backs, bottoms)
• Drawer slides and hardware
• LED light assembly with human sensor and charging station
• Power adapter
• Magnetic key for hidden drawer
• Assembly hardware (screws, dowels, cam locks, etc.)
• Instruction manual

Setup and Assembly

Assembly is required for this nightstand. Please follow the steps carefully. It is recommended to have a second person assist with assembly for stability and ease.

Assembly Video Guide

Step-by-Step Assembly Instructions

1. Prepare Drawer Components: Begin by assembling the main drawer boxes. Attach the side panels to the front and back panels using the provided hardware. Ensure all connections are secure.
   

   Image showing the nightstand with all drawers open, highlighting the storage capacity and the hidden gun drawer.

2. Install Drawer Slides: Attach the drawer slides to the assembled drawer boxes and to the inner side panels of the nightstand frame. Pay close attention to the orientation of the slides to ensure smooth operation.
3. Assemble Nightstand Frame: Connect the bottom panel to the side panels, then attach the back panel. Ensure the frame is square and stable.
   

   Diagram illustrating the overall dimensions of the nightstand and the internal dimensions of its drawers.

4. Attach Legs: Securely fasten the decorative legs to the bottom of the nightstand frame.
5. Install Top Panel: Carefully place and secure the top panel of the nightstand. This panel includes the integrated LED light and charging station.
6. Connect Electrical Components: Pass the lamp cord through the designated hole in the top panel. Connect the light wires to each other as shown in the video. Ensure all electrical connections are firm.
   

   Detail of the integrated charging station and light controls on the nightstand's top surface.

7. Insert Drawers: Pull out the drawer rails and carefully insert each assembled drawer into its corresponding slot. Ensure they slide smoothly.
8. Install Hidden Drawer: The hidden gun drawer is located at the bottom. Use the provided magnetic key to unlock and access this drawer. Ensure it operates correctly.
   

   Visual guide on using the magnetic key to access the secure hidden drawer.

9. Connect Power: Plug the power adapter into a suitable electrical outlet and connect it to the nightstand's charging station.

Operating Instructions

LED Light and Human Sensor Function

• Color Adjustment: The integrated reading lamp and LED light offer three adjustable colors (White Light, Warm Light, Yellow Light). Press the light switch button to cycle through these color modes.
• Brightness Adjustment: To adjust the brightness, long-press the light switch button. The brightness will cycle from 10% to 100%. Release the button when the desired brightness is reached.
• Human Sensor: Activate the human sensor function via its dedicated switch. When enabled, the LED light will automatically illuminate when a person is detected within 2-3 meters of the nightstand.
  

  Demonstration of the three color lighting modes and brightness adjustment for the nightstand's LED light.

  

  Visual representation of the human sensor's detection range and automatic light activation.

3-in-1 Charging Station

• The smart nightstand is equipped with a USB port and a Type-C port. Simply plug your devices into the appropriate port to charge them.
• Ensure the nightstand is connected to a power source for the charging station to function.

Hidden Gun Drawer Operation

• The hidden drawer is secured by a magnetic locking mechanism.
• To unlock, place the provided magnetic key on the designated spot on the drawer front (refer to assembly video or visual cues on the drawer).
• Once unlocked, gently pull the drawer open.
• To lock, simply push the drawer closed. The magnetic mechanism will engage automatically.

Maintenance

Regular maintenance will help prolong the life and appearance of your nightstand:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Dusting: Regularly dust the nightstand with a dry, soft cloth to prevent buildup.
• Drawer Slides: Periodically check drawer slides for smooth operation. If they become stiff, a small amount of silicone lubricant can be applied.
• Hardware: Occasionally check all screws and fasteners to ensure they are tight. Re-tighten if necessary.
• Spills: Clean up spills immediately to prevent staining, especially on the engineered wood surfaces.

Troubleshooting

Specifications

• Brand: FREDEES
• Model: Grey
• Product Dimensions (D x W x H): 16.9"D x 19.7"W x 23.6"H
• Material: Engineered Wood
• Number of Drawers: 4 (including 1 hidden gun drawer)
• Charging Ports: 1 USB, 1 Type-C
• Lighting Features: Integrated LED light with 3 color modes (White, Warm, Yellow), adjustable brightness, human sensor (2-3 meter induction)
• Assembly Required: Yes (Tools Recommended: Screw Driver)
• Indoor/Outdoor Usage: Indoor

Warranty and Support

Specific warranty information for this product is not provided in this manual. For details regarding warranty coverage, returns, or any product-related inquiries, please contact the seller directly through your purchase platform. Ensure you have your order details and product model number readily available for faster assistance.

For further assistance or technical support, please visit the FREDEES Store on Amazon or contact their customer service.