Nagnahz M60 Handle LED Video Light with Soft Box Instruction Manual

1. Introduction

The Nagnahz M60 Handle LED Video Light with Soft Box is a compact and versatile lighting solution designed for photography and videography. It features a powerful COB LED, adjustable bi-color temperature, and a high-capacity built-in battery, making it suitable for various shooting environments. The included soft box helps to create soft, diffused lighting.

Figure 1: Nagnahz M60 Handle LED Video Light with Soft Box.

2. What's in the Box

Please check the package contents to ensure all items are present:

• M60 Studio Light (with Built-in 3400mAh Battery) x 1
• 29cm Mini Bowens Mount Soft Box x 1
• Handle Mount x 1
• Power Adapter x 1
• Lampshade (Reflector) x 1
• Lamp Diffuser (Dome-shaped) x 1
• Instruction Manual x 1

Figure 2: Package contents of the Nagnahz M60.

3. Product Features

• Lightweight and Portable: Weighing approximately 460g, the M60 is designed for easy handheld use and portability.
• High Brightness COB LED: Features a high-brightness COB bead with uniform speed output, capable of up to 50W power and 13150 Lux illumination in overclocking mode.
• Built-in 3400mAh Battery: Offers up to 5 hours of continuous use at minimum brightness and 75 minutes at maximum brightness. Supports charging while in use via DC power adapter or Type-C port. The Type-C port can also charge a phone.
• High Color Rendition: Achieves CRI≥95 and TLCI≥96 for accurate color reproduction.
• Wide Bi-color Temperature Range: Adjustable color temperature from 2500K to 8500K.
• 8 Scene Lighting Effects: Includes creative pre-set lighting effects for diverse moods and aesthetics.
• Mini Bowens Mount: Compatible with external mini reflectors, mini diffusers, mini softboxes, and other mini light modifiers for versatile lighting effects. (Note: Mini Bowens Mount is not compatible with standard Bowens Mount).

Figure 3: M60 Handle LED Video Light in action.

4. Setup

1. Attach Handle or Tripod Mount: The M60 light body has a 1/4-inch screw thread at the bottom. Attach the provided handle mount by screwing it clockwise until secure. Alternatively, attach a compatible tripod or stand using the same screw thread.
2. Attach Light Modifier:
   • Reflector/Lampshade: Align the reflector with the Mini Bowens Mount on the front of the light and twist clockwise until it locks into place.
   • Diffuser Dome: If using the dome diffuser, attach it over the reflector or directly onto the light head if preferred for softer light.
   • Soft Box: Assemble the 29cm Mini Bowens Mount Soft Box according to its specific instructions, then attach it to the light's Mini Bowens Mount.
3. Powering the Device:
   • Internal Battery: The M60 has a built-in 3400mAh battery. Ensure it is charged before use.
   • External Power: Connect the provided power adapter to the DC charging port on the light and plug it into a power outlet. The light can be used while charging.
   • Type-C Charging: The Type-C port can be used for charging the light or for charging compatible external devices like a phone.

Figure 4: M60 with handle and reflector.

Figure 5: M60 with soft box attached.

5. Operating Instructions

The M60 features an intuitive control panel with an LCD display and two rotary knobs for adjustments.

Figure 6: M60 Control Panel.

1. Power On/Off: Press the power button located below the knobs to turn the light on or off. The LCD display will illuminate upon power-on.
2. Adjusting Brightness (DIM): Rotate the 'DIM' knob to increase or decrease the light's brightness. The brightness level (0-100%) will be displayed on the LCD screen.
3. Adjusting Color Temperature (CCT): Rotate the 'CCT' knob to change the color temperature from warm (2500K) to cool (8500K). The current Kelvin value will be shown on the LCD screen.
4. Special Effects Modes: The M60 includes 8 pre-programmed scene lighting effects. Refer to the LCD display and the manual for navigation and selection of these modes.

6. Maintenance

• Keep the device clean by wiping it with a soft, dry cloth.
• Avoid exposing the light to water or excessive moisture. The device is not water resistant.
• Store the light in a cool, dry place when not in use.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.

7. Troubleshooting

• Light not turning on:
  • Ensure the battery is charged or the power adapter is properly connected.
  • Check if the power button is fully pressed.
• Brightness/Color Temperature not adjusting:
  • Ensure the light is powered on.
  • Rotate the respective knobs (DIM for brightness, CCT for color temperature) to make adjustments.
• Short battery life:
  • Battery life varies with brightness settings. Higher brightness consumes more power.
  • Ensure the battery is fully charged before use.

8. Specifications

9. Warranty and Support

The Nagnahz M60 Handle LED Video Light comes with a 2-year warranty. For warranty claims, technical support, or any inquiries regarding your product, please contact Nagnahz customer service through their official website or the retailer where the product was purchased.

For more information, visit the Nagnahz Store on Amazon.