GPUTEK HT10 Bike Tire Electric Air Pump Instruction Manual

Introduction

Thank you for choosing the GPUTEK HT10 Electric Bike Pump. This portable and powerful device is designed to provide efficient and accurate tire inflation for various bicycles and other inflatables. Please read this manual carefully before use to ensure proper operation and maintenance.

Package Contents

Ensure all items are present in the package:

• GPUTEK HT10 Electric Bike Pump
• Air Hose
• Presta Adapter
• Ball Needle
• USB-C Charging Cable
• Waterproof Storage Bag

Image: The GPUTEK HT10 Electric Bike Pump, air hose, Presta adapter, ball needle, USB-C charging cable, and storage bag are neatly displayed as included accessories.

Product Features

• Professional High-Pressure Tire Pump: Automatic inflation with an LED digital gauge displaying real-time tire pressure. Customizable settings from 3 to 150 PSI, with automatic shut-off upon reaching the desired pressure.
• Portable and Compact Design: Measuring just 5.31 × 2.16 × 1.3 inches and weighing only 0.81 lbs, it includes a waterproof storage bag for easy attachment to your bike frame.
• Fast Inflation: Inflates a 70 × 23C road bike tire from 0 to 100 PSI in approximately 2 minutes 30 seconds, and a 27.5 × 2.2 inch mountain bike tire from 0 to 38 PSI in about 1 minute 20 seconds.
• Compatible with All Bikes: Equipped with a Schrader air hose and a Presta adapter, ensuring universal compatibility with mountain bikes, road bikes, e-bikes, city bikes, and motorcycles.
• Powerful Battery Life: Powered by a 4600mAh rechargeable battery, capable of inflating up to 10 road bike tires (70 × 23C) from 0 to 100 PSI or 20 mountain bike tires (27.5 × 2.2 inches) from 0 to 38 PSI on a single full charge.
• Built-in LED Light: Provides illumination for nighttime use or in low-light conditions.

Image: The GPUTEK HT10 pump connected to a bike tire, displaying a digital pressure reading, illustrating its fast inflation capability.

Image: A close-up of the GPUTEK HT10's digital screen, showing real-time pressure, battery level, and options for PSI, BAR, KPA, and KG/CM² units.

Image: The GPUTEK HT10 pump is shown next to a smartphone for size comparison, highlighting its compact and lightweight design.

Image: A graphic illustrating the 4600mAh battery capacity of the GPUTEK HT10 and the number of bike tires it can inflate on a single charge.

Image: The GPUTEK HT10 pump is shown stored in its waterproof frame bag, which is attached to a bicycle frame, demonstrating its portability.

Image: A graphic showcasing the GPUTEK HT10's compatibility with different types of bicycles, including road bikes, mountain bikes, e-bikes, and city bikes.

Setup

1. Charge the Pump: Before first use, fully charge the GPUTEK HT10 using the provided USB-C charging cable. The battery indicator on the digital display will show the charging status.
2. Attach Air Hose: Screw the air hose securely into the inflation port at the top of the pump.
3. Select Adapter: Depending on your tire valve type (Presta or Schrader), attach the appropriate adapter to the end of the air hose. The Schrader air hose is directly compatible, while the Presta adapter screws onto the Schrader hose.

Operating Instructions

1. Power On: Press and hold the power button for a few seconds to turn on the pump. The digital display will illuminate.
2. Connect to Valve: Securely connect the air hose (with the correct adapter) to your tire's valve stem. The display will show the current tire pressure.
3. Select Mode: Press the 'M' button to cycle through the preset inflation modes (e.g., Road Bike, Mountain Bike, E-Bike, City Bike, Manual). Each mode has a default PSI setting.
4. Adjust Pressure: Use the '+' and '-' buttons to adjust the target pressure to your desired PSI. The pump supports a range of 3 to 150 PSI. You can also change pressure units (PSI, BAR, KPA, KG/CM²) by pressing and holding the 'M' button.
5. Start Inflation: Once the desired pressure is set, press the power button briefly to start inflation. The pump will automatically stop when the target pressure is reached.
6. Stop Inflation (Manual): To manually stop inflation at any time, press the power button again.
7. Disconnect: Carefully disconnect the air hose from the tire valve.
8. Power Off: Press and hold the power button to turn off the pump.

Charging

The GPUTEK HT10 is powered by a 4600mAh lithium-ion rechargeable battery. Use the provided USB-C cable to charge the device. Connect the USB-C end to the pump and the USB-A end to a compatible power source (e.g., wall adapter, power bank, computer USB port). The digital display will indicate the charging status. A full charge provides extensive use, capable of inflating multiple tires.

Specifications

Maintenance

• Keep the pump clean and free from dust and debris.
• Store the pump in a cool, dry place when not in use.
• Charge the battery regularly, even if not used frequently, to prolong its lifespan.
• Avoid exposing the pump to extreme temperatures or direct sunlight for extended periods.

Troubleshooting

• Pump not turning on: Ensure the battery is charged. If not, connect to the charger.
• Pump not inflating: Check if the air hose is securely connected to both the pump and the tire valve. Ensure the correct adapter is used. Verify that the target pressure is set above the current tire pressure.
• Air leakage: Ensure all connections (hose to pump, adapter to hose, adapter to valve) are tight.
• Inaccurate pressure reading: Ensure the hose is properly connected to the valve. If issues persist, consult customer support.

Warranty and Support

The GPUTEK HT10 Portable Electric Bike Tire Air Pump comes with a 2-year warranty. For any product inquiries, technical support, or warranty claims, please contact GPUTEK customer service through the retailer where the product was purchased or refer to the contact information provided in your product packaging.