Introduction
Thank you for choosing the SURNICE Mini Wireless Remote Control Outlet System. This system provides convenient wireless control for your indoor electrical appliances, allowing you to turn them on or off from a distance. This package includes one remote control and three wireless outlets.
Image: The SURNICE Mini Wireless Remote Control Outlet System, showing one remote control and three compact white outlets.
Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or property damage.
- For indoor use only. Do not expose to rain or moisture.
- Do not exceed the maximum load rating of 15A / 1800W.
- Ensure the outlet is fully inserted into the wall socket.
- Do not disassemble or modify the product.
- Keep out of reach of children.
- Unplug the device from the wall outlet before cleaning.
Package Contents
- 1 x Wireless Remote Control
- 3 x Wireless Remote Control Outlets
- 1 x CR2032 Battery (pre-installed in remote)
Product Overview
Remote Control
The remote control features individual ON/OFF buttons for channels A, B, and C, as well as an ALL ON and ALL OFF button to control all paired outlets simultaneously. It operates using a CR2032 battery.
Wireless Outlet
Each compact outlet plugs into a standard wall socket. It features a manual power button and an indicator light. The compact design ensures it does not block adjacent outlets.
Image: A diagram illustrating the compact dimensions of the SURNICE wireless outlet (2.68 in x 1.42 in x 1.26 in) and the remote control (4.25 in x 1.42 in x 0.39 in), highlighting that the outlet does not obstruct the second wall socket.
Setup Instructions
Initial Installation
- Insert the CR2032 battery into the remote control if not already installed.
- Plug a SURNICE wireless outlet into a standard 120V AC wall socket.
- Plug the appliance you wish to control into the SURNICE wireless outlet. Ensure the appliance is switched to the 'ON' position if it has its own power switch.
Image: A SURNICE wireless outlet plugged into a wall socket, with a lamp connected and illuminated, demonstrating the ease of setup.
Pairing Outlets with Remote Control
The outlets and remote are typically pre-paired. If re-pairing is needed or you wish to customize assignments:
- Ensure the outlet is plugged into a wall socket.
- Press and hold the small programming button on the side of the outlet until its indicator light begins to flash slowly.
- While the indicator light is flashing, press the desired 'ON' or 'OFF' button (A, B, C, or ALL ON/OFF) on the remote control.
- The indicator light on the outlet will stop flashing, indicating successful pairing.
- Repeat this process for each outlet you wish to pair or re-pair.
Image: A visual representation of the remote control's grouping function, showing how individual outlets (1, 2, 3) can be controlled separately or together using the 'All On/Off' button.
Operating Instructions
Using the Remote Control
- To turn a specific appliance ON: Press the corresponding 'ON' button (A, B, or C) on the remote.
- To turn a specific appliance OFF: Press the corresponding 'OFF' button (A, B, or C) on the remote.
- To turn all paired appliances ON: Press the 'ALL ON' button on the remote.
- To turn all paired appliances OFF: Press the 'ALL OFF' button on the remote.
Image: A person in bed holding the remote control, illustrating the convenience of turning off lights or appliances without leaving the bed.
Manual Control on the Outlet
Each outlet has a manual power button on its side. Press this button to toggle the power of the connected appliance ON or OFF directly at the outlet.
Operating Range
The remote control utilizes a strong RF signal, allowing it to operate through doors and walls. The effective range is up to 260 feet (80 meters) in open areas.
Image: A visual representation of the remote control's 260ft long range, demonstrating its ability to send signals through walls and doors to control an outlet.
Maintenance
Remote Control Battery Replacement
The remote control uses one CR2032 battery. If the remote's performance degrades, replace the battery:
- Locate the battery compartment on the back of the remote.
- Open the compartment cover.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Close the battery compartment cover.
Cleaning
To clean the outlets and remote control, unplug the outlets from the wall and use a soft, dry cloth. Do not use liquid cleaners or immerse the devices in water.
Troubleshooting
- Appliance not responding to remote:
- Ensure the outlet is securely plugged into the wall socket and receiving power.
- Check if the appliance connected to the outlet is switched ON.
- Verify the remote control battery is not depleted. Replace if necessary.
- Re-pair the outlet with the remote control following the 'Pairing Outlets with Remote Control' instructions.
- Limited operating range:
- Thick walls, metal structures, or other electronic devices may interfere with the RF signal. Try repositioning the remote or the outlet.
- Ensure the remote control battery is fresh.
- Power outage behavior:
- After a power outage, the SURNICE outlets will remain in the OFF state to conserve energy and protect connected appliances. You will need to manually turn them ON using the remote or the button on the outlet.
Specifications
| Feature | Specification |
|---|---|
| Model Number | SN10082USAx3+SN20021USA |
| Product Dimensions (Outlet) | 2.72 x 1.42 x 1.3 inches |
| Operating Voltage | 120 Volts (AC) |
| Current Rating | 15 Amps |
| Power Rating | 1800 Watts |
| Operation Mode | ON-OFF-ON |
| RF Range | Up to 260 feet (80 meters) in open areas |
| Standby Power Consumption | Less than 0.3 Watts |
| Remote Battery Type | 1 x CR2032 (included) |
| Certifications | FCC Listed |
| Material | Metal (Contact Material) |
Image: A SURNICE outlet connected to an appliance, accompanied by a graph demonstrating the product's low standby power consumption (less than 0.3W) for energy saving.
Warranty and Support
Warranty Information
SURNICE products are designed for reliability and performance. For specific warranty details, please refer to the product packaging or contact SURNICE customer support.
Customer Support
If you have any questions, require assistance, or encounter issues with your SURNICE Mini Wireless Remote Control Outlet System, please contact our customer support team. You can find more information and contact details by visiting the official SURNICE store: