1. Introduction
This manual provides comprehensive instructions for the safe and efficient use of your CHGeek 15W Fast Wireless Car Charger, Model CB7005. Please read this manual thoroughly before operation and retain it for future reference.
2. Package Contents
Verify that all items listed below are included in your package:
- CHGeek Wireless Car Charger Unit
- USB Type-C Charging Cable
- Air Vent Mount Clip
- Suction Cup Mount
- User Manual (this document)
3. Product Features
- 15W Fast Wireless Charging: Intelligently recognizes your phone for optimal charging. Supports 15W for Pixel series, 10W for Samsung S series, and 7.5W for iPhone series. (Requires a QC 3.0 car charger, not included).
- Auto-Clamping Arms & Fast Release: Automatically clamps your phone within 0.5 seconds upon connection. Release your phone by touching a side button.
- Widely Applicable Vent Mount: Equipped with an upgraded metal hook, compatible with 99% of round, vertical, and horizontal air vents. Features a gear locking mechanism for stable grip.
- Flexible Angle Adjustment: 360° rotating sphere allows for optimal viewing angles.
- Case Compatibility: Charges through phone cases up to 4mm (0.16 inch) thick. Not compatible with metal cases, thick cases, or cases with magnets.
- Blue LED Backlit: Distinctive blue LED design for enhanced visibility in low-light conditions. Automatically turns off when phone is placed to avoid distraction.
4. Setup and Installation
The CHGeek Wireless Car Charger offers versatile mounting options for your convenience.
4.1 Attaching the Mount to the Charger Unit
- Unscrew the nut from your chosen mount (air vent clip or suction cup).
- Insert the ball joint of the mount into the spherical socket on the back of the charger unit.
- Tighten the nut clockwise to secure the mount to the charger unit.
Figure 1: Steps for assembling the charger unit with the chosen mount.
4.2 Mounting Options
Choose between the air vent mount or the suction cup mount based on your vehicle's interior and preference.
Air Vent Mount Installation:
- Twist the knob on the air vent clip to adjust the hook length.
- Attach the hook to one of your car's air vent blades. Ensure it is securely fastened using the gear locking mechanism.
- Adjust the charger's angle using the 360° rotating sphere for optimal viewing.
Figure 2: The air vent mount is compatible with various vent types.
Video 1: Demonstration of attaching the charger to an air vent and placing a phone.
Suction Cup Mount Installation:
- Clean the desired flat, smooth surface on your dashboard or windshield.
- Press the suction cup firmly onto the surface and push down the lever to create a vacuum seal.
- Adjust the charger's arm and angle for optimal viewing.
4.3 Power Connection
Connect the provided USB Type-C cable to the charging port at the bottom of the wireless charger unit. Plug the other end into a QC 3.0 car charger (not included) for fast charging capabilities.
5. Operating Instructions
5.1 Placing Your Phone
Once the charger is powered on, the auto-clamping arms will automatically open. Simply place your Qi-compatible smartphone into the holder. The arms will then automatically clamp to secure your phone and initiate wireless charging.
Figure 3: The auto-clamping mechanism secures the phone.
Video 2: Short demonstration of placing a phone into the auto-clamping charger.
5.2 Removing Your Phone
To release your phone, simply touch one of the quick-release buttons located on the sides of the charger unit. The arms will automatically open, allowing you to safely remove your device.
5.3 Charging Status
The blue LED backlight will illuminate when the charger is powered on. When a phone is placed for charging, the LED light will automatically turn off to prevent distraction during driving.
Figure 4: Visual representation of charging mode and LED backlight mode.
6. Maintenance
- Keep the charger unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the charger to extreme temperatures, direct sunlight for prolonged periods, or moisture.
- Ensure the suction cup mount is clean for optimal adhesion. Rinse with warm water and air dry if it loses stickiness.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on. | No power supply or loose connection. | Ensure the USB cable is securely connected to both the charger and a working QC 3.0 car adapter. Check the car's power outlet. |
| Phone not charging wirelessly. | Phone not Qi-compatible, misaligned, or case is too thick/metallic. | Verify phone supports Qi wireless charging. Realign phone on the charging pad. Remove thick or metallic phone cases. Ensure a QC 3.0 adapter is used. |
| Auto-clamping arms not working. | No power or obstruction. | Check power connection. Ensure no foreign objects are obstructing the arms. |
| Mount is not stable. | Improper installation or dirty suction cup. | For vent mount, ensure the hook is fully tightened. For suction cup, clean the surface and the suction cup thoroughly before re-applying. |
8. Specifications
- Model Number: CB7005
- Brand: CHGeek
- Input Voltage: 9 Volts
- Amperage: 3 Amps
- Connector Type: USB Type C
- Wireless Charging Output: 15W (Max)
- Compatible Devices:
- iPhone: 16, 16 Pro Max, 15, 15 Pro Max, 15 Plus, 14, 14 Pro Max, 14 Plus, 13, 13 Pro Max, 13 Mini, 12, 12 Pro Max, 12 Mini, 11, 11 Pro Max, XS, XS MAX, X, XR, 8, 8 Plus (Not for Pro models of 11-16)
- Samsung: S24, S24 Ultra, S24+, S23, S23 Ultra, S23+, S22, S22 Ultra, S22+, S21 Ultra 5G, S21+, S21, S21 FE, S20, S10, S9, S9+, S8, S8+, S7, S7 Edge, S6 Edge Plus, Note 10 10+, Note 9, Note 8, Note 7, etc.
- Google: Pixel 9, Pixel 8, Pixel 7, Pixel 6/6 Pro, Pixel 5/5a, Pixel 4/4XL
- Sony: Xperia Z3v(D6708), XZ2 Premium, XZ3, Xperia 1 III, Xperia 5 II, Xperia 5 III, Xperia 10 III, Xperia XZ2
- All Qi Wireless Charging Compatible Phones: for HTC/Motorola/Nokia/Oppo/Palm/Vivo/Xiaomi, etc.
- Item Weight: 8.4 ounces
- Package Dimensions: 6.73 x 4.92 x 2.83 inches
9. Warranty and Support
Your CHGeek Wireless Car Charger (Model CB7005) comes with a 2-year warranty. For any product inquiries, technical support, or warranty claims, please contact CHGeek customer service. Please refer to the contact information provided on the product packaging or the official CHGeek website for the most up-to-date support details.
Included Components: User Manual
