1. Introduction
This manual provides essential information for the safe and effective operation of your MOSFiATA 36 LED Par Light. Please read this manual thoroughly before use and retain it for future reference. This device is designed for stage lighting, party lighting, and other event illumination purposes, offering various control modes and vibrant RGB colors.
2. Safety Information
- Ensure the power supply voltage matches the product's requirements.
- This product is for indoor use only. Avoid exposure to rain or moisture.
- Do not open the casing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Maintain adequate ventilation around the unit to prevent overheating.
- Avoid direct eye exposure to the light source.
- Always disconnect power before cleaning or performing maintenance.
3. Package Contents
Verify that all items are present upon unpacking:
- MOSFiATA 36 LED Par Light (2 units)
- Remote Control (2 units)
- Mounting Brackets (4 units)
- Screws (4 units)
- Instruction Manual (2 units)
Image 3.1: Overview of the MOSFiATA 36 LED Par Light package contents.
4. Product Features
- Upgraded Hexagonal Prism Lens Design: Provides a crystal-clear and expansive lighting effect with wider coverage.
- High-Performance and Silent Operation: Features 36 imported 1W LED beads for exceptional brightness, stability, and efficiency. Advanced PCB heat dissipation technology ensures silent operation.
- Multiple Adjustable Lighting Modes: Includes Static Color, Color Change, Color Fade, Auto Play, Sound Activated, Master-Slave, and DMX control.
- Flexible Mounting Brackets: Dual-bracket design allows for hanging on ceiling rods or stage trusses, or placement on the floor. Angle is adjustable.
- Wide Application Range: Suitable for DJ performances, KTVs, discos, bars, weddings, parties, and festive events.
Image 4.1: Two MOSFiATA 36 LED Par Lights and their remote controls.
5. Setup
5.1 Mounting the Light
The MOSFiATA 36 LED Par Light features a dual-bracket design for versatile mounting. You can:
- Floor Placement: Position the light on a flat, stable surface. Adjust the bracket to achieve the desired angle.
- Hanging Installation: Use the provided brackets and screws to securely attach the light to a ceiling rod, truss, or other suitable overhead structure. Ensure the mounting point can support the weight of the fixture.
Always ensure the light is securely fastened and the angle is adjusted to direct the light precisely where needed.
Image 5.1: Illustration of various mounting positions for the LED Par Light.
5.2 Power Connection
Connect the power cord to a standard AC110V 50/60Hz power outlet. The light is corded electric and does not require batteries for operation.
6. Operating Modes
The MOSFiATA 36 LED Par Light offers 7 dynamic lighting modes, controllable via the included infrared remote or DMX.
- Static Color: Displays a single, constant color.
- Color Change: Cycles through different colors with abrupt transitions.
- Color Fade: Smoothly transitions between different colors.
- Auto Play: Automatically runs through pre-programmed light sequences.
- Sound Activated: The light changes patterns and colors in response to ambient sound or music.
- Master-Slave: Connect multiple units, where one unit acts as the master and controls the others (slaves) to synchronize effects.
- DMX Control: Allows for professional control of the light's functions using a DMX controller.
Image 6.1: Remote control showing buttons for various operating modes.
Image 6.2: Visual representation of various color effects.
7. Remote Control Operation
The included infrared remote control allows for convenient adjustment of the light's functions. Point the remote directly at the light's sensor for optimal response.
Remote Functions:
- Power ON/OFF: Turns the light on or off.
- DMX Mode: Activates DMX control.
- Auto Mode: Initiates automatic program cycling.
- Jump Mode: Fast color changes.
- Flash Mode: Strobe effect.
- Sound Activated: Activates sound-responsive lighting.
- Gradual Mode: Smooth color fading.
- 7 Colors Mode: Selects specific static colors (Red, Green, Blue, RGB, RG, RB, GB).
- Speed +/-: Adjusts the speed of dynamic modes.
Image 7.1: Detailed diagram of the remote control functions and the light's back panel.
8. DMX Control
For advanced lighting control, the MOSFiATA 36 LED Par Light supports DMX512 protocol. Connect a DMX controller to the light using standard DMX cables (not included).
8.1 DMX Connections
Use the DMX In and DMX Out ports located on the rear of the unit to connect to a DMX controller or to daisy-chain multiple lights.
Image 8.1: Rear panel showing DMX In/Out ports and digital display.
8.2 DMX Channel Settings
The light typically uses 3-7 DMX channels. Refer to the specific DMX channel chart in the separate DMX guide (if provided) or experiment with your DMX controller to assign functions such as color, intensity, and strobe effects to individual channels.
9. Maintenance
9.1 Cleaning
To maintain optimal performance and appearance, clean the light periodically. Disconnect the power before cleaning.
- Use a soft, lint-free cloth to wipe the exterior.
- For stubborn dirt, slightly dampen the cloth with water. Avoid harsh chemicals or abrasive cleaners.
- Gently clean the lens to ensure maximum light output.
9.2 Storage
When not in use, store the light in a dry, dust-free environment, preferably in its original packaging or a protective case.
10. Troubleshooting
If you encounter issues with your MOSFiATA 36 LED Par Light, refer to the following common problems and solutions:
- No Power:
- Check if the power cord is securely connected to both the light and the power outlet.
- Verify that the power outlet is functional.
- No Light Output:
- Ensure the unit is powered on.
- Check the selected operating mode; some modes might appear off if not properly configured.
- Remote Control Not Responding:
- Ensure there are no obstructions between the remote and the light's sensor.
- Verify the remote control's battery (if applicable, though this model does not require batteries for the light itself, the remote might).
- Point the remote directly at the light's infrared receiver.
- DMX Control Issues:
- Check DMX cable connections.
- Ensure the DMX address on the light matches the setting on your DMX controller.
- Verify that the DMX controller is functioning correctly.
11. Specifications
Image 11.1: Product dimensions and key specifications.
| Specification | Detail |
|---|---|
| Model Number | XKL-A4 |
| Brand | MOSFiATA |
| Light Source Type | Light Emitting Diode (LED) |
| Number of LEDs | 36 (1W each) |
| Light Source Wattage | 36 Watts |
| Power Source | Corded Electric |
| Voltage | AC110V 50/60Hz |
| Control Modes | Auto, Sound Activated, DMX512, Master-Slave, Static Color, Color Change, Color Fade |
| DMX Channels | 3-7 channels |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 7"L x 2.2"W x 7"H (18cm L x 5.8cm W x 18cm H) |
| Item Weight | 3.03 pounds (approx. 1.37 kg) |
| Are Batteries Included | No (for the light unit) |
12. Warranty and Support
MOSFiATA products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MOSFiATA website. Keep your purchase receipt as proof of purchase for any warranty claims.