Introduction
The roborock Flexi Wet Dry Vacuum Cleaner is designed to provide an effortless and efficient cleaning experience for your home. With advanced features like 180° FlatReach design, powerful 17000Pa suction, and intelligent self-cleaning and self-drying capabilities, this device ensures spotless floors with minimal effort. This manual provides essential information on setting up, operating, and maintaining your new vacuum cleaner to ensure optimal performance and longevity.
What's in the Box
- User Manual
- Dusting Brush
- Accessory Kit
- Charging Dock
- Adapter
Image: All included components of the Roborock Flexi Wet Dry Vacuum Cleaner.
Setup
Assembly
1. Insert the handle into the main body of the vacuum until it clicks into place.
2. Place the charging dock on a flat surface near a power outlet.
3. Connect the adapter to the charging dock and plug it into the power outlet.
Charging
Place the vacuum cleaner onto the charging dock. The LED display on the handle will indicate the charging status. Ensure the device is fully charged before its first use for optimal battery performance.
Image: The Roborock Flexi positioned on its charging dock, ready for use.
Operating Instructions
Powering On/Off
Press the power button on the handle to turn the vacuum cleaner on or off. The LED display will light up, showing the current battery level and cleaning mode.
Cleaning Modes
The roborock Flexi features DirTect™ Adaptive Cleaning technology, which automatically adjusts cleaning power and water flow based on the detected dirt level. You can also manually select cleaning modes via the LED display for specific cleaning needs.
Image: The Roborock Flexi's DirTect technology dynamically adjusting cleaning power to match dirt levels on the floor.
Key Features in Action
- 17,000Pa Super Suction Power: Experience powerful suction that effortlessly lifts fine dust and larger particles from various floor types.
- Hot Water Self-Cleaning: The upgraded 140°F hot water self-cleaning technology tackles dirt, debris, and tough oil stains with bi-directional roller action.
- Hot Air Drying: After cleaning, the 122°F heated air drying ensures your mop is ready for the next use without odors.
- 180° FlatReach Design: The vacuum glides effortlessly under furniture as low as 5.9 inches, reaching previously inaccessible areas.
- Triple-Edged Cleaning: Ultra-thin side margins (less than 0.04 inch) ensure every nook and cranny is spotless, providing edge-to-edge cleaning.
- Real-Time Voice Alerts: Stay informed with convenient voice alerts for operational reminders and status updates.
Image: The Roborock Flexi showcasing its 17,000Pa super suction power by cleaning various wet and dry messes.
Image: A detailed view of the Roborock Flexi's hot water self-cleaning system, ensuring the brush stays clean.
Image: The Roborock Flexi's hot air drying system, designed to keep the brush hygienic and odor-free.
Image: The Roborock Flexi's ability to lay flat and reach under low furniture for thorough cleaning.
Image: A close-up of the Roborock Flexi's triple-edged cleaning, highlighting its minimal side margins for comprehensive cleaning.
Image: The Roborock Flexi's handle with its display showing voice alerts for user guidance.
Official Product Videos
Roborock Flexi Wet Dry Vacuum Overview
Video: An official overview of the Roborock Flexi Wet Dry Vacuum, demonstrating its key features and cleaning capabilities.
How to Use Roborock App with Flexi
Video: A tutorial on connecting and customizing your Roborock Flexi using the official Roborock mobile application.
Maintenance
Self-Cleaning Cycle
After each use, place the vacuum on its charging dock and initiate the self-cleaning cycle. This process uses hot water and bi-directional roller action to clean the brush, followed by hot air drying to prevent odors.
Emptying Water Tanks
Regularly empty the dirty water tank to maintain optimal suction and hygiene. The Roborock Flexi features a smart design that separates solid debris from liquid, making disposal cleaner and easier. Refill the clean water tank as needed with fresh water.
Cleaning the Roller Brush
While the self-cleaning function is highly effective, occasional manual cleaning of the roller brush may be necessary, especially after cleaning heavily soiled areas or pet hair. Remove the roller brush cover and the brush itself, then rinse under running water. Ensure it is completely dry before reinserting.
Maintenance Overview (Influencer Video)
Video: This video provides a hands-on demonstration of emptying the dirty water tank and cleaning the roller brush, offering practical tips for maintaining your Roborock Flexi.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| No Power | Battery drained; Not properly docked. | Charge the device fully; Ensure proper contact with charging pins. |
| Weak Suction | Dirty water tank full; Clogged roller brush; Filter needs cleaning. | Empty dirty water tank; Clean roller brush; Clean or replace filter. |
| Unpleasant Odor | Dirty water tank not emptied; Roller brush not dried properly. | Empty and rinse dirty water tank; Run hot air drying cycle. |
| Device not connecting to App | Incorrect WiFi password; Device too far from router; App issue. | Re-enter WiFi password; Move device closer to router; Restart app/device. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 12.36 x 14.49 x 45.67 inches |
| Item Weight | 10.37 Pounds |
| Suction Power | 17,000Pa |
| Run Time | Up to 50 minutes |
| Clean Water Tank Capacity | 730 ml |
| Dirty Water Tank Capacity | 450 ml |
| Self-Cleaning | 140°F Hot Water Self-Cleaning |
| Drying | 122°F Hot Air Drying |
| FlatReach Design | 180° Lay-Flat Design (cleans under 5.9 inches) |
| Edge Cleaning | Triple-Edged Cleaning (<0.04 inch margins) |
| Connectivity | App Control, Voice Alert |
Warranty & Support
For detailed warranty information and support, please refer to the official user manual provided with your product or visit the roborock official website. You can also download the full user manual in PDF format here.
