OutdoorMaster Cachalot

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

OutdoorMaster 20PSI High Pressure SUP Air Pump Instruction Manual

Brand: OutdoorMaster | Model: Cachalot

1. Introduction and Product Overview

The OutdoorMaster Cachalot 2 Mini Paddle Board Pump is designed for efficient and convenient inflation and deflation of various high-pressure inflatables, including SUPs, kayaks, and air beds. It features intelligent dual-stage inflation, an auto-off function, and a digital LCD display for real-time pressure monitoring.

This pump operates on a 12V DC car connector and comes with a full set of nozzle attachments to ensure compatibility with most inflatable products.

OutdoorMaster Cachalot 2 Mini Paddle Board Pump with accessories

Figure 1: The OutdoorMaster Cachalot 2 Mini Paddle Board Pump and its included accessories, including various nozzles and the 12V DC car connector.

2. Setup Guide

  1. Connect Power: Connect the pump's 12V DC car connector to your vehicle's 12V outlet. Ensure a secure connection.
  2. Connecting pump to car's 12V DC outlet

    Figure 2: Connecting the pump to a car's 12V DC power outlet for operation.

  3. Attach Hose: Securely attach the flexible air hose to the pump's inflation port (usually marked "OUT").
  4. Select Nozzle: Choose the appropriate nozzle attachment for your inflatable product. The pump comes with a full set of nozzles to fit most high-pressure inflatables, including C7 & H3 valves.
  5. Various nozzle attachments for different inflatables

    Figure 3: A selection of nozzle attachments for various inflatable items, ensuring broad compatibility.

  6. Connect to Inflatable: Attach the selected nozzle to the valve of your inflatable. Ensure a tight seal to prevent air leakage during inflation.

3. Operating Instructions

3.1 Inflation

  1. Set Desired Pressure: Use the digital LCD display and the '+' and '-' buttons to set your target pressure in PSI or BAR. The pump supports up to 20 PSI.
  2. Digital LCD display showing pressure settings

    Figure 4: The pump's digital LCD display, used for setting and monitoring inflation pressure.

  3. Start Inflation: Press the power button (usually marked with a power symbol) to begin inflation. The pump will operate in two stages:
    • Stage 1 (High Speed): For rapid initial inflation at 350L/min.
    • Stage 2 (High Pressure): Automatically switches to a higher pressure stage at 70L/min to reach the set PSI.
  4. Auto-Off Function: The pump will automatically shut off once the preset pressure is reached, preventing over-inflation and conserving energy.
  5. People inflating paddle boards with the pump

    Figure 5: Users inflating paddle boards, demonstrating the pump's ease of use.

3.2 Deflation

The pump also features a deflation function to quickly remove air from your inflatables, making them easier to fold and store. To deflate:

  1. Connect to Deflation Port: Attach the air hose to the pump's deflation port (usually marked "IN" or with a deflation symbol).
  2. Connect to Inflatable: Connect the appropriate nozzle to your inflatable's valve.
  3. Start Deflation: Press the deflation button (usually marked with a '-' symbol or a specific deflation icon) to begin deflating.

4. Maintenance

  • Cleaning: Wipe the pump's exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
  • Storage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the hose and nozzles are clean and dry before storage.
  • Cable Care: Avoid kinking or damaging the power cable. Store it neatly when not in use.

5. Troubleshooting

ProblemPossible CauseSolution
Pump does not turn on.No power from 12V DC outlet; loose connection; blown fuse.Check car's 12V outlet for power; ensure secure connection; check and replace pump's 12A fuse if necessary.
Pump not reaching set pressure.Air leakage from hose/nozzle connection; inflatable valve not properly sealed.Ensure all connections are tight; check inflatable valve for proper closure and seal.
Pump is excessively noisy during operation.Normal operation during high-pressure stage; foreign object in fan.Some noise is normal, especially in the second stage. If unusual, check for obstructions in air vents.
Pump overheats and shuts off.Continuous operation for too long; blocked air vents.Allow pump to cool down before resuming use; ensure air vents are clear.

6. Product Specifications

FeatureDetail
BrandOutdoorMaster
Model NameCachalot
ColorBlack
MaterialPlastic
Power SourceCorded Electric (12V DC Car Connector)
Air Flow Capacity350 LPM (Stage 1), 70 LPM (Stage 2)
Maximum Pressure20 PSI
Operation ModeAutomatic Dual Stage, Auto-Off
Hose Length4.5 Feet
Item Weight4.7 Pounds
Included ComponentsPump, Detachable Air Hose, Full Set of Nozzles

7. Warranty and Support

This OutdoorMaster Cachalot 2 Mini Paddle Board Pump comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official OutdoorMaster website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official online store.

You can also visit the OutdoorMaster Store on Amazon for more product information and support resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.