1. Introduction
Thank you for purchasing the Lulive 10-Drawer Dresser with Charging Station, Model XG-D8E0. This manual provides essential information for the safe assembly, operation, and maintenance of your new dresser. Please read these instructions carefully before use and retain them for future reference.
2. Safety Instructions
- Assembly: Ensure all parts are present and undamaged before assembly. Follow the assembly steps precisely.
- Stability: Always use the provided anti-tip kit to secure the dresser to a wall. This prevents accidental tipping and potential injury, especially in households with children.
- Weight Capacity: Do not overload drawers or the top surface. The dresser supports up to a 50" tabletop TV or an 85" wall-mounted TV (when secured).
- Power Hub: Only connect devices within the specified voltage and amperage limits (2 AC outlets, 2 USB ports). Do not use damaged cords or adapters. Keep liquids away from the power hub.
- Placement: Place the dresser on a flat, stable surface. Avoid placing it in areas with excessive moisture or direct sunlight.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the dresser.
3. Parts List
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Steel Frame components
- Wooden Top Panel
- Fabric Drawers (10 total: 4 small, 6 large)
- Power Hub (2 AC outlets, 2 USB ports, 5-foot power cord)
- Adjustable Feet
- Anti-tip Kit (wall anchors, screws)
- Side Pockets (for additional storage)
- Hooks (for hanging items)
- Assembly Hardware (screws, Allen wrench)
4. Setup and Assembly
Assembly typically takes 20-30 minutes. Follow these steps carefully:
- Unpack: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Assemble Frame: Connect the steel frame components according to the diagrams in the included assembly guide. Ensure all screws are tightened securely.
- Attach Top Panel: Secure the wooden top panel to the assembled steel frame using the provided screws.
- Insert Drawers: Unfold each fabric drawer and insert the bottom panel to create a sturdy box. Slide the drawers into their designated slots within the frame.
- Install Power Hub: Integrate the power hub into the designated slot on the top panel. Ensure it is flush and secure.
- Attach Accessories: Install the side pockets and hooks as desired on the sides of the dresser.
- Adjust Feet: Adjust the leveling feet at the bottom of the dresser to ensure stability on uneven surfaces.
- Secure with Anti-tip Kit: Attach the anti-tip kit to the back of the dresser and securely fasten it to a wall stud. This step is crucial for safety.
5. Operating Instructions
5.1 Using the Drawers
The dresser features 10 fabric drawers of varying sizes (approximately 13.4" and 9.8" wide). To open, gently pull the handle. To close, push the drawer back into the frame until it is flush. The drawers are designed to be lightweight and easily removable for organizing or cleaning.
5.2 Utilizing the Power Hub
The integrated power hub includes 2 standard AC outlets (125V/12A) and 2 USB ports (5V/2A). To use, plug the dresser's 5-foot power cord into a wall outlet. You can then connect your electronic devices such as lamps, phone chargers, or small appliances directly to the power hub. Ensure devices do not exceed the specified power limits.
5.3 Side Storage
The dresser includes side pockets and hooks for additional storage. Use the hooks for hanging bags, jackets, or accessories. The side pockets are suitable for smaller items like books, magazines, or remote controls.
6. Maintenance
- Cleaning: Wipe the wooden top and metal frame with a dry, soft cloth. For the fabric drawers, spot clean with a damp cloth and mild detergent if necessary. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if needed.
- Drawer Care: Avoid overfilling drawers to prevent damage to the fabric or frame.
- Power Hub: Ensure the power hub remains dry and free of dust. Unplug the dresser from the wall outlet before cleaning the power hub.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dresser is wobbly. | Uneven floor; loose connections. | Adjust the leveling feet at the bottom. Check and tighten all screws. |
| Drawers do not slide smoothly. | Drawer is overloaded; fabric is misaligned. | Reduce contents in the drawer. Ensure the drawer's bottom panel is fully inserted and the fabric is not caught. |
| Power outlets/USB ports not working. | Dresser not plugged in; device overload; faulty device. | Ensure the dresser's power cord is securely plugged into a functional wall outlet. Check if the connected device is working. Avoid exceeding power hub limits. |
| Dresser appears unstable. | Anti-tip kit not installed or improperly installed. | Install or re-secure the anti-tip kit to a wall stud as per instructions. |
8. Specifications
- Brand: Lulive
- Model Name: XG-D8E0
- Product Dimensions: 43.3" W x 11.8" D x 30.7" H
- Number of Drawers: 10 (4 small, 6 large)
- Material: Engineered Wood (top), Metal (frame), Fabric (drawers)
- Color: Black and White Stripes
- Item Weight: 28 pounds
- Power Hub: 2 AC Outlets (125V/12A), 2 USB Ports (5V/2A), 5-foot power cord
- Care Instructions: Wipe with Dry Cloth
9. Warranty and Support
For warranty information, product support, or to purchase replacement parts, please contact Lulive customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Return Policy: This product typically has a 30-day return/replacement policy. Please check with your retailer for specific return conditions.
Protection Plans: Optional 2-Year and 3-Year Protection Plans are available for purchase. Contact your retailer for details.
