Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Mount-It! Height Adjustable TV Wall Mount (Model MI-444BLK). Designed for 23-55 inch screens, this full-motion mount offers vertical and pull-down adjustments, swivel, and tilt capabilities to optimize your viewing experience. Please read this manual thoroughly before installation to ensure safe and correct usage.
Figure 1: Mount-It! Height Adjustable TV Wall Mount (Model MI-444BLK)
Safety Information
WARNING: Improper installation or use of this product can result in serious injury or damage. Ensure all instructions are followed carefully. If you are unsure about any part of the installation, consult a qualified professional.
- Do not exceed the maximum weight capacity of 50.6 lbs (23 kg).
- Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- Always use appropriate tools and safety equipment during installation.
- Keep children and pets away from the installation area.
- Regularly check all connections and fasteners to ensure they remain secure.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Mount-It! customer service.
| Component | Quantity |
|---|---|
| Wall Plate Assembly | 1 |
| TV Bracket Assembly | 1 |
| Mounting Hardware Kit (screws, anchors, washers) | 1 set |
| Instruction Manual | 1 |
Setup and Installation
This mount is designed for single wood stud or solid concrete/brick wall installation. Do not install on drywall alone.
1. Prepare the Wall
- Locate a suitable wood stud using a stud finder, or identify a solid concrete/brick wall section.
- Mark the desired mounting height for the wall plate. Ensure it is level.
Figure 2: The mount is suitable for single wood stud, brick, or concrete wall installations. All necessary hardware is included.
2. Attach Wall Plate
- Drill pilot holes at the marked locations.
- Secure the wall plate assembly to the wall using the provided lag bolts and washers. Ensure it is firmly attached and level.
3. Attach TV Brackets to TV
- Identify the VESA mounting holes on the back of your TV. This mount supports VESA patterns from 75x75mm up to 400x400mm.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
- Attach the TV bracket assembly to the back of your television. Ensure the brackets are centered and securely fastened.
Figure 3: The mount fits screens from 23 to 55 inches and supports various VESA patterns including 75x75, 100x100, 200x100, 200x200, 400x200, 300x300, 400x300, and 400x400. It can hold TVs up to 50.6 pounds.
Figure 4: Detailed dimensions of the Mount-It! TV wall mount, showing the wall plate, articulating arm, and TV bracket measurements.
4. Hang the TV
- Carefully lift the TV with the attached brackets and hook it onto the wall plate arm.
- Secure the TV to the arm using the locking screws or mechanisms provided.
Operating Instructions
Full Motion Adjustment
The Mount-It! TV mount offers effortless full motion movement, allowing you to pull the TV out from the wall, swivel it, and tilt it for optimal viewing angles.
Figure 5: The TV mount allows for full motion, enabling the TV to be positioned away from the wall for better viewing.
Figure 6: The mount extends from 2.8 inches to 18.28 inches from the wall and offers 9.3 inches of vertical height adjustment.
Figure 7: The mount provides +/-90° swivel, +5°/-15° tilt, and +/-3° leveling adjustments for perfect viewing angles.
Figure 8: The articulating arm design makes this mount ideal for corner installations, maximizing viewing flexibility.
Figure 9: The mount allows the TV to be extended significantly from the wall, providing versatile positioning options.
Gas Spring Height Adjustment
The integrated gas spring allows for smooth and effortless vertical height adjustments. To adjust the tension, use the provided Allen key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier TVs, and counter-clockwise to decrease tension for lighter TVs.
Cable Management
Utilize the integrated cable management clips along the arm to route and conceal your TV cables. This helps maintain a clean and organized appearance.
Product Features Video
Watch this official video from Mount-It! to see the full motion and gas spring features in action.
Video 1: Full Motion TV Wall Mount with Gas Spring Arm | MI-444BLK (Features). This video demonstrates the effortless full motion, gas spring height adjustment, adjustable tension, VESA compatibility, sturdy design, and cable management features of the MI-444BLK TV mount.
Maintenance
- Periodically check all screws and bolts to ensure they are tight and secure.
- Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not lubricate the gas spring mechanism unless specifically instructed by Mount-It! support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV does not stay at desired height or moves too easily/stiffly. | Gas spring tension is not correctly adjusted for TV weight. | Adjust the gas spring tension screw (refer to "Gas Spring Height Adjustment" section). Turn clockwise for heavier TVs, counter-clockwise for lighter TVs. |
| Mount feels unstable after installation. | Wall plate not securely fastened or wall material is insufficient. | Re-check all wall plate fasteners. Ensure installation is on a solid wood stud or concrete/brick wall. Do not install on drywall alone. |
| TV is not level. | Leveling adjustment needed. | Adjust the leveling screws on the TV bracket (refer to installation diagrams). |
Specifications
- Model: MI-444BLK
- Brand: Mount-It!
- Screen Size Compatibility: 23 - 55 inches
- Weight Capacity: Up to 50.6 lbs (23 kg)
- VESA Compatibility: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 400x200mm, 300x300mm, 400x300mm, 400x400mm
- Movement Type: Height Adjustable, Articulating (Full Motion)
- Tilt Range: -15° to +5°
- Swivel Range: Up to 180° (depending on TV size and wall distance)
- Level Adjustment: +/-3°
- Wall Distance (Retracted): 2.8 inches
- Wall Distance (Extended): Up to 18.3 inches
- Material: Alloy Steel
- Color: Black
- Item Weight: Approximately 8.68 pounds
- Package Dimensions: 17.5 x 13.94 x 4 inches
Warranty and Support
The Mount-It! Height Adjustable TV Wall Mount is backed by a Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims, technical support, or any questions regarding your product, please contact Mount-It! customer service.
Mount-It! Customer Service:
- Website: www.mount-it.com
- Email: Refer to website for contact form or email address.
- Phone: Refer to website for phone number.
Please have your model number (MI-444BLK) and purchase information ready when contacting support.
