Introduction
This manual provides detailed instructions for the safe and effective use of your FITORCH EC30 High Power Rechargeable LED Flashlight. Please read this manual thoroughly before operation and retain it for future reference.
The FITORCH EC30 is a versatile and durable high-power flashlight, constructed from aluminum alloy. It delivers up to 2600 lumens of brightness, powered by a single lithium-ion battery, and features a CREE XHP50.2 LED for a broad beam reaching up to 250 meters. It includes five brightness settings, two signal modes, a battery level indicator, and a lockout function. Its compact size and IPX8 waterproof rating make it suitable for various conditions.
Package Contents
The package for your FITORCH EC30 flashlight includes the following items:
- Fitorch EC30 Flashlight
- Battery (Lithium Ion)
- USB Cable
- Holster
- Lanyard
Setup
1. Battery Installation
The EC30 flashlight uses one 21700 Lithium-Ion battery. Ensure the battery is inserted with the positive (+) terminal facing towards the flashlight head.
- Unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Insert the provided 21700 Lithium-Ion battery with the positive (+) end facing the head of the flashlight.
- Screw the tail cap back on clockwise until it is securely tightened. A loose tail cap may prevent the flashlight from operating.
2. Initial Charging
Before first use, it is recommended to fully charge the battery. The EC30 features a built-in USB-C charging port.
To charge the flashlight:
- Locate the USB-C charging port on the side of the flashlight body.
- Open the rubber cover protecting the charging port.
- Connect the provided USB-C cable to the flashlight and plug the other end into a USB power source (e.g., computer, wall adapter).
- The indicator light on the side switch will show charging status. It typically glows red during charging and turns green when fully charged.
- Once charging is complete, disconnect the USB-C cable and securely close the rubber cover to maintain water resistance.
Operating Instructions
Basic Operation
The EC30 is operated primarily via its side switch.
- Turn On/Off: Single click the side switch to turn the flashlight on or off. The flashlight will remember the last used brightness mode (except Strobe and SOS).
- Change Brightness Modes: When the flashlight is on, press and hold the side switch to cycle through the brightness modes: Eco → Low → Medium → High → Turbo. Release the switch to select the desired mode.
- Instant Turbo: From OFF, press and hold the side switch for approximately 1 second to activate Turbo mode directly. Release to turn off.
- Strobe Mode: From ON or OFF, double-click the side switch to activate Strobe mode.
- SOS Mode: From Strobe mode, double-click the side switch again to activate SOS mode.
- Exit Strobe/SOS: Single click the side switch to turn off the flashlight from Strobe or SOS mode.
Lockout Function
The lockout function prevents accidental activation of the flashlight, which is useful for carrying or storage.
- Activate Lockout: From OFF, press and hold the side switch for approximately 3 seconds until the flashlight flashes once. The flashlight is now locked out.
- Deactivate Lockout: From lockout mode, press and hold the side switch for approximately 3 seconds until the flashlight turns on in Eco mode. The flashlight is now unlocked.
Battery Level Indicator
The indicator light on the side switch provides real-time battery status:
- Green Light: Battery level is sufficient (typically > 50%).
- Red Light: Battery level is low (typically 20-50%).
- Flashing Red Light: Battery level is critically low (typically < 20%). Please recharge immediately.
Maintenance
- Cleaning: Clean the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Threads: Periodically lubricate the O-rings and threads with silicone grease to maintain water resistance and smooth operation.
- Battery Care: If the flashlight will not be used for an extended period, remove the battery to prevent leakage. Store batteries in a cool, dry place.
- Water Resistance: Ensure the USB-C port cover is securely closed to maintain the IPX8 waterproof rating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. |
|
|
| Light output is dim or flickers. |
|
|
| Charging indicator not working. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model | EC30 |
| Brand | FITORCH |
| Light Source | CREE XHP50.2 LED |
| Max Brightness | 2600 Lumens |
| Max Beam Distance | 250 Meters |
| Material | Aluminum Alloy |
| Power Source | 1 x Lithium-Ion Battery (21700) |
| Voltage | 3.7 Volts |
| Dimensions (L x D x H) | 5.03" x 1.09" x 1.33" (1.33" head diameter) |
| Item Weight | 3.68 ounces (0.23 Pounds) |
| Water Resistance | IPX8 (Waterproof) |
| Drop Resistance | 4.92 feet |
| Included Components | Battery, Fitorch EC30 Flashlight, Holster, Lanyard, USB Cable |
| Special Features | Durable, High Power, Rechargeable, Battery Level Indicator, Lockout Function |
Note: All data above were tested in Fitorch lab in regular ambient conditions. Using 21700 5000mAh Li-ion rechargeable battery. Different test environments may cause different results.
Warranty and Support
Warranty Information
The FITORCH EC30 Flashlight comes with a Fitorch 5 Year Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, warranty claims, or any questions regarding your FITORCH EC30 flashlight, please contact Fitorch customer support. Refer to the official Fitorch website for the most up-to-date contact information.
Official Fitorch Website: www.fitorchworld.com
Safety Precautions
- Do not shine the flashlight directly into eyes. The high lumen output can cause temporary vision impairment or permanent eye damage.
- Keep out of reach of children.
- Do not disassemble the sealed head of the flashlight. Doing so may damage the flashlight and void the warranty.
- Do not mix old and new batteries, or batteries of different types.
- Avoid exposing the flashlight to extreme temperatures or direct sunlight for prolonged periods.
- If the flashlight becomes hot during prolonged use, this is normal. However, if it becomes excessively hot, reduce the brightness mode or turn it off to allow it to cool.
