Reencle Reencle Prime

Reencle Prime Hybrid Food Waste Disposer

Model: Reencle Prime

Introduction

Thank you for choosing the Reencle Prime Hybrid Food Waste Disposer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and keep it for future reference.

The Reencle Prime utilizes a hybrid bio-drying method to efficiently process food waste, significantly reducing its volume and eliminating odors. Its silent operation and energy-saving design make it an ideal addition to any modern kitchen.

Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

  • Ensure the unit is placed on a stable, level surface.
  • Do not immerse the unit in water or other liquids.
  • Keep hands and foreign objects away from the processing chamber during operation.
  • Unplug the unit before cleaning or performing any maintenance.
  • Do not attempt to repair the unit yourself. Contact customer support for assistance.
  • Keep out of reach of children and pets.
  • Only use the provided compost starter (bio-flakes) and activated carbon filters.

Package Contents

Verify that all items are present in the package:

  • Reencle Prime Food Waste Disposer Unit
  • Compost Starter (Bio-flakes)
  • Activated Carbon Filter (pre-installed or separate)
  • Power Cord
  • User Manual (this document)

Setup

  1. Unpacking: Carefully remove the Reencle Prime from its packaging.
  2. Placement: Place the unit on a flat, stable surface in your kitchen or utility area. Ensure there is adequate ventilation around the unit.
  3. Initial Bio-flake Installation:

    Open the lid of the disposer. Locate the processing chamber. Pour the entire bag of Reencle Compost Starter (bio-flakes) into the chamber.

    Image showing Reencle Bio-flakes packaging and how to add them to the unit.

    Image: Reencle Bio-flakes packaging. These bio-flakes are essential for the hybrid processing method.

  4. Activated Carbon Filter: Verify that the activated carbon filter is correctly installed in its compartment. Refer to the maintenance section for filter replacement instructions.
  5. Power Connection: Plug the power cord into a grounded electrical outlet.

Operating Instructions

Adding Food Waste

  1. Automatic Lid: The Reencle Prime features a sensor for automatic lid opening and closing. Simply approach the unit, and the lid will open, allowing for hands-free disposal.Image showing a person disposing of food waste into the Reencle Prime with the automatic lid open.

    Image: Automatic lid opening for convenient waste disposal.

  2. Waste Input: Place food waste directly into the processing chamber. The unit is designed for easy input.Image illustrating the simple process of adding food waste to the Reencle Prime.

    Image: Simply add food waste to the unit.

  3. Processing: The hybrid bio-drying process will begin automatically. Food waste is typically reduced by 97% within approximately 24 hours.Image showing a 'Before' state with food waste and an 'After' state with significantly reduced compost, indicating 97% reduction.

    Image: Visual representation of 97% waste reduction after processing.

What Can and Cannot Be Processed

To ensure optimal performance and prevent damage, adhere to the following guidelines:

Acceptable Items:

  • Vegetables and fruits
  • Cooked rice and bread
  • Meat, fish, and small bones (e.g., chicken bones)
  • Eggs and eggshells
  • Coffee grounds and tea leaves
  • Pet waste (in moderation)
  • Small amounts of paper products (e.g., paper towels)

Unacceptable Items:

  • Large animal bones (e.g., beef bones)
  • Hard shells (e.g., crab, lobster)
  • Fruit pits (e.g., avocado, peach)
  • Plastics, metals, glass
  • Rubber, vinyl
  • Oils, gasoline, chemicals
  • Medicines, batteries
  • Cigarette butts
Image illustrating acceptable and unacceptable items for the food waste disposer.

Image: Visual guide for items that can and cannot be processed.

Maintenance

Activated Carbon Filter Replacement

The activated carbon filter is crucial for the deodorization system. Replace it regularly according to usage or when you notice a decrease in odor control.

  1. Unlock: Locate the filter compartment on the side of the unit. Rotate the lock mechanism to unlock.
  2. Remove: Gently pull out the old filter.
  3. Install New Filter: Insert a new activated carbon filter, ensuring it is seated correctly.
  4. Lock: Rotate the lock mechanism back to secure the filter compartment.
Image demonstrating the steps to unlock, remove, and replace the activated carbon filter.

Image: Steps for replacing the activated carbon filter.

Cleaning

  • Unplug the unit before cleaning.
  • Wipe the exterior with a damp cloth. Do not use abrasive cleaners.
  • The processing chamber can be cleaned by running a cycle with a small amount of water and a mild, biodegradable detergent, then emptying the contents.
  • Ensure the unit is dry before plugging it back in.

Troubleshooting

ProblemPossible CauseSolution
Unit does not power on.Not plugged in; power outage; faulty outlet.Check power cord connection; verify power supply; try a different outlet.
Unpleasant odor.Filter needs replacement; too much liquid waste; inappropriate items processed.Replace activated carbon filter; reduce liquid content in waste; refer to "Unacceptable Items" list.
Lid not opening/closing automatically.Sensor obstructed; sensor malfunction.Clean sensor area; if problem persists, contact support.
Waste not processing effectively.Insufficient bio-flakes; too much waste; inappropriate items.Add more bio-flakes; do not exceed daily capacity; ensure only acceptable items are processed.

Specifications

FeatureDetail
ModelReencle Prime
Dimensions (D x W x H)30.5 cm x 33.1 cm x 46.7 cm
Height with Lid Open73 cm
Weight9.1 kg
Processing MethodHybrid (Bio-drying)
Daily Processing Capacity (Approx.)1 kg
Maximum Processing Capacity1.7 kg/day
Noise LevelBelow 27 dB
Deodorization System4-layer system: Bio-flakes, TiO2 exhaust filter, Activated Carbon filter, UV-C deodorization device.
Power Consumption52 W
ColorWhite
Image showing the Reencle Prime's energy consumption (52W) compared to other appliances.

Image: Energy consumption comparison, highlighting the Reencle Prime's 52W usage.

Image comparing the Reencle Prime's noise level (27dB) to common household sounds like a refrigerator.

Image: Noise level comparison, showing Reencle Prime is quieter than a refrigerator.

Warranty and Support

The Reencle Prime comes with a 1-year warranty from the date of purchase, covering initial defects and malfunctions under normal use.

Image displaying '1 Year Warranty' in Japanese text.

Image: Warranty information indicating a 1-year coverage period.

For any questions, concerns, or warranty claims, please contact Reencle customer support. Our team is dedicated to ensuring your satisfaction.

Contact information can typically be found on the product packaging or the official Reencle website.

© 2024 Reencle. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.