1. Introduction
The SwitchBot Air Purifier Table is a versatile 4-in-1 device designed to enhance your home environment. It functions as an air purifier, a convenient coffee table, an RGB ambient light, and a wireless charger. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and air quality.
Image: The SwitchBot Air Purifier Table showcasing its multiple functionalities: air purification, storage, wireless charging, and ambient lighting.
Key Features:
- 4-in-1 Design: Combines an air purifier, coffee table, RGB ambient light, and wireless charger (up to 15W for Android, 7.5W for iPhone).
- Whole-Home Coverage: Cleans large areas up to 3620 ft² for consistent air quality.
- Pet & Odor Focused: Effectively captures pet hair, dander, smoke, and odors, removing up to 98% of common household smells in as little as 30 minutes.
- Matter Support: Seamlessly connects to Alexa, Google Home, Apple Home (HomeKit), Home Assistant, and more without extra hubs. (Supports 2.4GHz Wi-Fi; 5GHz not supported).
- Smart Ecosystem Air Management: Automatically adjusts purification when paired with other SwitchBot devices (Hub 2 required).
- Quiet Sleep Mode: Operates quietly at 20dB for undisturbed rest.
- Advanced HEPA Filtration: 3-stage system captures 99.97% of airborne particles as small as 0.3 µm.
- Real-Time Air Quality Monitoring: High-precision sensors display PM2.5 levels in the SwitchBot App.
- Integrated Aroma Function: Built-in tray for essential oils to diffuse fragrance.
- Washable Pre-Filter: Easy maintenance with smart filter replacement reminders.
2. Safety Information
Please read all safety instructions before using this appliance to reduce the risk of fire, electric shock, or injury. Keep this manual for future reference.
- Do not operate the appliance with a damaged cord or plug.
- Do not use the appliance in wet environments or near water.
- Keep the appliance away from heat sources and direct sunlight.
- Ensure proper ventilation around the unit; do not block air inlets or outlets.
- Unplug the appliance before cleaning or performing any maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- The wireless charging function is designed for compatible devices. Do not place metal objects or foreign materials on the charging pad.
3. Package Contents
Verify that all items are included in your package:
- 1 x SwitchBot Air Purifier Table
- 1 x Pet Filter (Pre-Installed)
- 1 x User Manual
4. Setup
4.1 Unpacking and Assembly
- Carefully remove all components from the packaging.
- Place the main air purifier unit on a stable, flat surface.
- Attach the tabletop to the top of the air purifier unit. Ensure it is securely fastened according to the included instructions.
Video: A user demonstrating the simple assembly of the air purifier table, including placing the tabletop and showing its use as a nightstand.
4.2 Initial Power-On
- Plug the power cord into a standard electrical outlet.
- The unit will power on and may perform an initial air quality check.
5. Operating Instructions
5.1 Manual Controls
The top panel of the air purifier features touch controls for basic operation:
- Power Button: Press to turn the unit on or off.
- Fan Speed (Levels 1, 2, 3): Adjust the fan intensity.
- Mode Selection (Auto, Pet, Sleep): Cycle through different operating modes.
- Timer (2H, 4H, 6H): Set the unit to operate for a specific duration.
- Child Lock: Press and hold for 3 seconds to activate/deactivate.
Image: A detailed view of the control panel on the SwitchBot Air Purifier Table, showing buttons for power, fan speed, modes, timer, and child lock.
5.2 SwitchBot App Control
For advanced features and remote control, download the SwitchBot App from your smartphone's app store.
- Pairing: Follow the in-app instructions to pair your Air Purifier Table with the SwitchBot App.
- Real-Time Monitoring: View current PM2.5 levels and air quality status.
- Mode Selection: Choose from Auto, Pet, or Sleep modes.
- Customization: Adjust backlight and sound settings, including brightness and light color (10 options available, or set to show air quality).
- Wireless Charging: Toggle the wireless charging function on or off.
Image: A smartphone screen displaying the SwitchBot App interface with real-time PM2.5 levels and controls for the air purifier.
5.3 Smart Home Integration (Matter)
The SwitchBot Air Purifier Table supports Matter, allowing seamless integration with major smart home platforms like Alexa, Google Home, and Apple Home (HomeKit) without requiring an additional hub.
- Matter Setup: Follow the Matter setup guide within the SwitchBot App to connect your device to your preferred smart home ecosystem.
- Voice Control: Use voice commands (e.g., "Alexa, turn on my Air Purifier") to control the unit.
- Automation: Create routines and automations with other smart devices for enhanced air quality management.
Image: The SwitchBot Air Purifier Table integrated with Matter, showing compatibility with Apple Home, Home Assistant, Alexa, Hey Google, and Samsung SmartThings.
5.4 Aroma Function
To use the integrated aroma function:
- Locate the aroma tray on the side of the unit.
- Pull out the tray and add a few drops of your preferred essential oil onto the pad.
- Reinsert the tray. The fragrance will diffuse as the air purifier operates.
Image: A hand adding essential oil drops to the pull-out aroma tray on the side of the air purifier.
5.5 Wireless Charging
Place your compatible smartphone (up to 15W for Android, 7.5W for iPhone) on the designated wireless charging area on the tabletop. Ensure the device is centered for optimal charging.
Image: A smartphone placed on the wooden tabletop of the air purifier, indicating wireless charging in progress.
6. Maintenance
6.1 Pre-Filter Cleaning
The washable pre-filter should be cleaned every 2 to 4 weeks, or more frequently if you have pets or high dust levels.
- Turn off and unplug the air purifier.
- Remove the outer grille and carefully detach the pre-filter.
- Gently vacuum the pre-filter to remove loose hair and dust, or rinse it under running water.
- If wet, ensure the pre-filter is completely dry before reinserting.
Image: A person demonstrating the washing process of the washable pre-filter under a faucet.
6.2 HEPA and Carbon Filter Replacement
The HEPA and activated carbon filters are integrated into a single unit and are not washable. The SwitchBot App will provide smart reminders when it's time to replace the filter (typically every 6-12 months, depending on usage).
- Turn off and unplug the air purifier.
- Remove the outer grille and the used filter unit.
- Dispose of the old filter responsibly.
- Insert a new, genuine SwitchBot replacement filter.
- Replace the outer grille.
- Reset the filter lifetime indicator in the SwitchBot App.
Image: An exploded view diagram illustrating the 3-layer filtration system: Pre-Filtration Layer, HEPA Filter, and Carbon Filter.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply | Check if the power cord is securely plugged into the outlet. |
| Poor air purification performance | Clogged filters | Clean the pre-filter or replace the main filter unit. |
| Wireless charging not working | Device not compatible or improperly placed | Ensure your device supports wireless charging and is centered on the charging pad. Check app settings to ensure wireless charging is enabled. |
| Cannot connect to SwitchBot App/Smart Home | Wi-Fi issues or incorrect pairing process | Ensure your Wi-Fi is 2.4GHz. Restart your router and the air purifier. Follow app instructions carefully for pairing. |
| Unusual noise during operation | Obstruction in fan or loose filter | Turn off and unplug the unit. Check for any foreign objects near the fan or ensure the filter is correctly installed. |
8. Specifications
- Model Number: W5302310
- Product Dimensions: 11.69 x 15 x 21.65 inches
- Item Weight: 10.68 Pounds
- Color: White
- Power Source: Corded Electric
- Control Method: App, Manual Buttons, Voice Control
- Filter Type: HEPA (3-stage filtration with washable pre-filter, HEPA, and activated carbon)
- Floor Area Coverage: Up to 3620 Square Feet
- Noise Level: 20 Decibels (in Sleep Mode)
- Particle Retention Size: 0.01 Micrometer
- Wattage: 72 Watt-hours
- Special Features: Pet Mode, Wireless Charging Tabletop, Sleep Mode, Ten Adjustable Night Light Colors, Integrated Aroma Function, Real-Time PM2.5 Monitoring
- Smart Home Compatibility: Matter, Alexa, Google Home, Apple Home (HomeKit), Home Assistant, SmartThings, Homey, IFTTT
- Certifications: Energy Star Certified, ETL Certified, CARB Certified, FCC Certified, CE Certified, CA65 Certified
9. Warranty and Support
For warranty information, technical support, or to purchase replacement filters, please visit the official SwitchBot website or contact their customer service. Details can typically be found in the product packaging or on the brand's online store page.
Online Support: Visit the SwitchBot Store on Amazon