VINGLI 38.5-inch Red Rose Outdoor Metal Bench User Manual

1. Important Safety Information

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Always assemble this bench on a flat, stable surface to ensure proper balance and prevent tipping.
• Use the provided safe screw caps to cover exposed bolt ends, preventing potential injuries during and after assembly.
• Once assembled, this bench is designed for stationary use. While it can be moved, avoid frequent relocation to maintain structural integrity. If moving, lift carefully with assistance.
• Ensure the bench is securely anchored to the ground if placed in areas prone to strong winds or uneven terrain to prevent tipping.
• Do not exceed the maximum weight capacity of 460 pounds (approximately 208 kg). This bench is designed for 2 persons.
• Regularly inspect the bench for any loose parts, damage, or signs of wear. Tighten fasteners as needed.
• Keep children and pets away from the assembly area during installation.
• This bench is weather-resistant, but prolonged exposure to extreme weather conditions (e.g., heavy snow, prolonged rain, intense sun) may affect its finish and lifespan. Consider covering or storing indoors during harsh weather.

2. Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact VINGLI customer support.

• Bench components (backrest, seat, armrests, legs)
• Assembly hardware (screws, nuts, washers, safe screw caps)
• Assembly tool (wrench)
• Instruction manual

3. Setup and Assembly

The VINGLI 38.5-inch Red Rose Outdoor Metal Bench is designed for easy assembly. One person can typically complete the assembly within 15 minutes using the provided instructions and tools.

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat, and stable surface.
2. Identify Parts: Refer to the included parts diagram (if available in physical manual) to identify each component (backrest, seat, legs, armrests, hardware).
3. Attach Legs to Seat: Securely attach the leg frames to the underside of the seat panel using the appropriate screws, washers, and nuts. Do not fully tighten all bolts until the entire bench is assembled.
4. Attach Backrest: Connect the backrest panel to the seat and leg frames. Ensure the rose pattern on the backrest is facing the desired direction.
5. Attach Armrests: Fasten the armrests to the side frames of the bench.
6. Final Tightening: Once all components are loosely assembled, gently rock the bench to ensure it sits evenly. Then, systematically tighten all screws and nuts using the provided wrench. Avoid over-tightening.
7. Apply Safety Caps: Place the safe screw caps over any exposed bolt ends for a smooth finish and added safety.

Image: Bench dimensions and seating capacity.

Image: Detail of the rose pattern and foot levelers.

Assembly Video:

4. Operating Instructions

The VINGLI Outdoor Metal Bench is designed for comfortable seating in various outdoor environments such as patios, gardens, parks, and porches.

• Placement: Position the bench on a level, stable surface. The antique classic design complements various outdoor settings.
• Seating: The bench is designed to comfortably seat up to two individuals. Ensure the combined weight does not exceed 460 pounds.
• Stability: Before each use, gently check the bench's stability. If it wobbles, inspect for loose fasteners and tighten them as necessary.
• Movement: If you need to move the bench, lift it carefully from both ends. Avoid dragging it, as this can damage the legs or the surface it's on.

Image: Bench in use in a garden setting.

5. Maintenance

Proper maintenance will extend the life and preserve the appearance of your VINGLI Outdoor Metal Bench.

• Cleaning: Wipe the bench regularly with a dry cloth to remove dust and debris. For more stubborn dirt, use a damp cloth with mild soap and water, then dry thoroughly. Avoid abrasive cleaners or harsh chemicals.
• Rust Prevention: The bench features an anti-rust aluminum frame and cast iron supports with a painted weather-resistant finish. While designed to withstand outdoor elements, inspect for any chips or scratches in the paint that could expose the metal to moisture and lead to rust. Touch up any damaged areas promptly.
• Weather Protection: Although weather-resistant, consider covering the bench during prolonged periods of inclement weather (heavy rain, snow, extreme heat) or storing it indoors during off-seasons to maximize its lifespan.
• Fastener Check: Periodically check all nuts and bolts to ensure they remain tight. Loose fasteners can compromise the bench's stability and safety.

Image: Features highlighting durability and craftsmanship.

6. Troubleshooting

If you encounter any issues with your VINGLI Outdoor Metal Bench, refer to the following common troubleshooting tips:

• Bench is Wobbly:
  • Ensure all bolts and nuts are securely tightened.
  • Verify the bench is placed on a flat and level surface. Adjustable foot levelers (if present) can be used to compensate for minor unevenness.
• Difficulty During Assembly:
  • Double-check that you are using the correct hardware for each step as indicated in the assembly instructions.
  • Do not fully tighten any bolts until all components are loosely fitted together. This allows for minor adjustments and alignment.
  • If a part does not fit, do not force it. Re-examine the instructions and part orientation.
• Signs of Rust:
  • Although rust-resistant, minor surface rust can occur if the protective coating is scratched or damaged. Clean the affected area, sand lightly if necessary, and apply a rust-inhibiting paint suitable for outdoor metal.
• Squeaking Noises:
  • Tighten all fasteners. If squeaking persists, apply a small amount of silicone lubricant to the joints.

7. Specifications

8. Warranty and Return Policy

VINGLI offers a 30-day return policy for this product.

• During this 30-day period, VINGLI will cover the shipping cost for returns and replacements if the item is defective, damaged, has missing parts, or encounters assembly problems.
• For other reasons beyond quality issues, you may be responsible for return shipping costs.
• Products must be returned in their original packaging and shipped within 30 days of delivery.
• Please inform VINGLI customer support once the product has been shipped back to process your refund promptly. Refunds are typically applied to your account within 1-3 business days after deducting any necessary return freight.

For detailed terms and conditions regarding warranty claims or returns, please refer to the official VINGLI website or contact customer support directly.

9. Customer Support

For any questions, concerns, or assistance with your VINGLI 38.5-inch Red Rose Outdoor Metal Bench, please contact VINGLI customer support.

• Online Support: Visit the official VINGLI website for FAQs, product registration, and contact forms.
• Amazon Store: You can also visit the VINGLI Store on Amazon for more information and to contact the seller directly.

Please have your model number (castbench) and purchase details ready when contacting support to ensure efficient service.