PWAY PW-DT273P-RX HDMI Extender Receiver Only Instruction Manual

Introduction

This manual provides detailed instructions for the PWAY PW-DT273P-RX HDMI Extender Receiver Only. This device is designed to extend HDMI signals over long distances using Cat5e/6 Ethernet cables, supporting Power over Ethernet (POE) for simplified installation. This receiver unit is part of a system that requires a compatible PWAY HDMI Extender Transmitter (sold separately) to function. It is ideal for applications requiring high-quality video transmission over extended ranges, such as home theaters, conference rooms, and digital signage.

Package Contents

• 1 x PWAY PW-DT273P-RX HDMI Extender Receiver
• 1 x Power Adapter (DC 12V)
• 1 x IR Receiver Cable
• 1 x User Manual

Product Overview

The PWAY PW-DT273P-RX is an HDMI extender receiver unit. It works in conjunction with a PWAY HDMI Extender Transmitter to transmit high-definition audio and video signals over a single Cat5e/6 cable. Key features include Power over Ethernet (POE) support, allowing the receiver to draw power from the transmitter over the Ethernet cable, reducing the need for a separate power supply at the display end. It also supports bi-directional IR pass-through for remote control of source devices.

Receiver Unit (PW-DT273P-RX)

• HDMI Output: Connects to your display device (TV, monitor, projector).
• CAT5e/6 Input: Connects to the transmitter unit via an Ethernet cable. This port also delivers POE.
• IR Input: Connects to the IR receiver cable to receive remote control signals.
• Power LED: Indicates power status.
• Signal LED: Indicates HDMI signal status.

Setup Instructions

1. Connect the Transmitter:
   • Connect your HDMI source device (e.g., DVD player, laptop) to the HDMI input port of the PWAY HDMI Extender Transmitter (sold separately) using an HDMI cable.
   • If the transmitter does not support POE, connect the provided power adapter to the transmitter's DC 12V input.
2. Connect the Receiver:
   • Connect your display device (e.g., TV, monitor) to the HDMI output port of the PWAY PW-DT273P-RX Receiver using an HDMI cable.
   • Connect one end of a Cat5e/6 Ethernet cable to the CAT5e/6 output port of the Transmitter and the other end to the CAT5e/6 input port of the Receiver.
   • If the transmitter does not provide POE, connect the provided power adapter to the Receiver's DC 12V input.
3. IR Pass-through Setup (Optional):
   • Connect the IR transmitter cable (from the transmitter unit) to the IR output port on the Transmitter and position the IR emitter in front of your source device's IR sensor.
   • Connect the IR receiver cable (from the receiver unit) to the IR input port on the Receiver and position the IR receiver in a location where your remote control can easily access it.
4. Power On: Ensure all connections are secure. Power on your HDMI source device and display. The Power LED on both units should illuminate, and the Signal LED should indicate a stable connection.

Connection Diagrams

Operating Instructions

Once all connections are made and devices are powered on, the HDMI signal from your source device will be automatically transmitted to the connected display via the extender system. No additional software or drivers are typically required for basic operation.

• Signal Transmission: The extender will automatically detect and transmit the HDMI signal.
• IR Remote Control: Use your original remote control at the receiver end to control the source device located at the transmitter end. Ensure the IR receiver and emitter are correctly positioned.

Specifications

Troubleshooting

• No Picture/Signal:
  • Ensure all HDMI and Ethernet cables are securely connected.
  • Verify that the power adapter is correctly connected and the Power LED is on.
  • Check if the Ethernet cable is Cat5e/6 and meets the required length specifications.
  • Try connecting the HDMI source directly to the display to confirm the source and display are working correctly.
  • If using a POE switch, ensure the switch port provides sufficient power.
• Poor Picture Quality:
  • Ensure you are using high-quality Cat5e/6 cables.
  • Check for any kinks or damage in the Ethernet cable.
  • Reduce the cable length if it exceeds recommended maximums.
• IR Remote Control Not Working:
  • Verify that the IR receiver and emitter cables are correctly plugged into their respective ports (IR IN on receiver, IR OUT on transmitter).
  • Ensure the IR emitter is directly aligned with the IR sensor of the source device.
  • Ensure the IR receiver is positioned to receive signals from your remote control.

Warranty and Support

PWAY products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PWAY customer service through their official website or the retailer where the product was purchased.

Contact Information: Please visit the official PWAY website for the most up-to-date support contact details.