Introduction
Thank you for choosing the Northern Light Technologies LiteUp 10000 Lux Light Therapy Lamp. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before operation and retain it for future reference.
The LiteUp lamp is designed to provide 10,000 lux of full-spectrum, UV-blocked light, simulating natural daylight. It is intended for use in light therapy to enhance mood and energy, particularly during periods of reduced natural light.
Important Safety Information
Please read all safety warnings and instructions carefully before using this product.
- Electrical Safety: Ensure the lamp is connected to a grounded power outlet. Do not operate with a damaged cord or plug. Do not immerse the lamp in water or other liquids.
- Placement: Position the lamp on a stable, flat surface or securely mount it to a wall. Ensure adequate ventilation around the lamp.
- Eye Protection: While the lamp emits UV-blocked light, avoid staring directly into the light source for extended periods.
- Medical Conditions: Consult a healthcare professional before using this product if you have a pre-existing eye condition, a history of mania, or are taking photosensitizing medications.
- Children and Pets: Keep the lamp out of reach of children and pets.
- Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Disposal: Dispose of the product and its components according to local regulations.
Package Contents
Verify that all items are present in your package:
- Northern Light Technologies LiteUp 10000 Lux Light Therapy Lamp
- Detachable Stand/Legs
- Wall Mount Bracket (optional use)
- Instruction Manual (this document)
Image: The LiteUp lamp shown with its included detachable stand and wall mount bracket.
Setup Instructions
The LiteUp lamp offers two primary setup options: desktop use with the included stand or wall mounting.
Option 1: Desktop/Tabletop Setup
- Unpack the LiteUp lamp and its detachable stand components.
- Attach the legs to the base of the lamp. Ensure they are securely fastened to provide a stable foundation.
- Place the lamp on a flat, stable surface at a comfortable distance for therapy (typically 10-14 inches from your face).
- Plug the 12-foot grounded power cord into a suitable electrical outlet.
Image: The LiteUp lamp set up on a surface using its detachable stand.
Option 2: Wall Mounting
The LiteUp lamp can be mounted on a wall for optimal positioning and space-saving. Mounting hardware is not included and must be sourced separately, appropriate for your wall type.
- Identify a suitable location on a wall, ensuring it is near a power outlet and at an appropriate height for use.
- Using the wall mount bracket as a template, mark the drilling points on the wall.
- Drill pilot holes and install appropriate wall anchors if necessary.
- Securely attach the wall mount bracket to the wall using screws.
- Carefully attach the LiteUp lamp to the mounted bracket. Ensure it is stable and secure before releasing.
- Plug the 12-foot grounded power cord into a suitable electrical outlet.
Image: The LiteUp lamp shown wall-mounted, providing ambient light.
Operating Instructions
Using Your LiteUp Lamp
- Power On: Locate the ON/OFF switch on the right side of the front panel of the lamp. Flip the switch to the 'ON' position. The lamp will illuminate.
- Positioning: Position yourself approximately 10-14 inches from the lamp. The light should be directed towards your eyes, but you do not need to stare directly into it. You can engage in other activities such as reading, working, or eating while using the lamp.
- Session Duration: A typical light therapy session is 20-30 minutes, preferably in the morning. Consult a healthcare professional for personalized recommendations regarding session duration and timing.
- Power Off: When your session is complete, flip the ON/OFF switch to the 'OFF' position.
Image: Visual representation of the key benefits and features of the LiteUp lamp.
Image: The front of the LiteUp lamp, highlighting the light panel and power switch.
Maintenance
Cleaning
- Always unplug the lamp from the power outlet before cleaning.
- Use a soft, dry, lint-free cloth to wipe the exterior surfaces of the lamp.
- For the light panel, gently wipe with a slightly damp cloth if necessary, then immediately dry with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the lamp's finish or light panel.
Bulb Replacement
The LiteUp lamp uses long-lasting LED bulbs with an estimated duration of 20,000 hours. Bulb replacement is generally not required for the typical lifespan of the product. If a bulb issue arises, please contact customer support for assistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light output seems dim. |
|
|
| Lamp is unstable on its stand. |
|
|
If you experience issues not covered in this section, please contact Northern Light Technologies customer support.
Specifications
| Feature | Detail |
|---|---|
| Model | NLT-LUP2 |
| Light Intensity | 10,000 Lux at 14 inches |
| Light Type | Full Spectrum, UV-Blocked LED |
| Power Consumption | 36 Watts |
| Voltage | 110-270 Volts, 50/60 Hz (auto-selecting) |
| Product Dimensions (H x W x D) | 13.78 x 12.2 x 2.76 inches |
| Weight | 8.16 Pounds |
| Light Panel Size | 12 inches x 12 inches (approx.) |
| Power Cord Length | 12 feet (grounded) |
| Bulb Lifespan | Approximately 20,000 hours |
| Manufacturer | Northern Light Technologies |
| Origin | Made in North America (Canada) |
Image: Detailed specifications and physical attributes of the LiteUp lamp.
Warranty and Support
Warranty Information
The Northern Light Technologies LiteUp lamp is backed by an industry-leading 7-year warranty on the unit itself. The bulbs are covered for 1 year from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, warranty claims, or any questions regarding your LiteUp lamp, please contact Northern Light Technologies customer support.
Contact information can typically be found on the manufacturer's official website or on the product packaging.
Note: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
