Aeitto ZBJ116

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Aeitto Nugget Ice Maker Countertop Model ZBJ116 User Manual

Model: ZBJ116

1. Introduction

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Aeitto Nugget Ice Maker Countertop Model ZBJ116. Please read this manual thoroughly before first use and retain it for future reference.

2. Important Safety Instructions

  • Read all instructions before operating the appliance.
  • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
  • Ensure the appliance is placed on a stable, level surface away from heat sources and direct sunlight.
  • Do not immerse the appliance, power cord, or plug in water or other liquids.
  • Unplug the appliance from the outlet when not in use, before cleaning, and before adding or removing parts.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Use only potable water in the water tank.
  • Do not use the appliance outdoors.
  • Keep ventilation openings clear of obstructions.

3. Product Overview

The Aeitto Nugget Ice Maker Countertop Model ZBJ116 is designed to produce chewable nugget ice efficiently. It features a high-efficiency compressor, a large water tank, and an automatic ice-making cycle.

Key Features:

  • Strong Ice Making Capacity: Produces up to 55 lbs of nugget ice per day with a low noise level.
  • Large Water Tank & Ice Basket: Equipped with a 3.6 L water tank and a 3.2 lb removable ice basket for extended operation.
  • Rapid Ice Release: Delivers ice in approximately 5 minutes.
  • Chewable Nugget Ice: Produces soft, chewable, and tooth-friendly ice, ideal for various beverages.
  • Automatic Ice Making Cycle: Features an infrared sensor to detect ice levels, pausing when full and resuming after 30 minutes when ice levels drop.
  • Auto-Cleaning Function: Simplifies maintenance with a one-touch cleaning cycle.

Package Contents:

  • Nugget Ice Maker (Model ZBJ116) x 1
  • Ice Scoop x 1
  • Ice Basket x 1
Aeitto Nugget Ice Maker Countertop Model ZBJ116

Figure 3.1: Aeitto Nugget Ice Maker Countertop Model ZBJ116.

4. Setup and First Use

4.1 Unpacking

  1. Carefully remove the ice maker from its packaging.
  2. Remove all packing materials, including any tape or protective film.
  3. Inspect the appliance for any damage. If damaged, do not operate and contact customer support.

4.2 Placement

  • Place the ice maker on a firm, level surface.
  • Ensure there is at least 6 inches (15 cm) of space around the appliance for proper ventilation.
  • Avoid placing the unit near heat sources (e.g., ovens, radiators) or in direct sunlight.
  • The appliance should be placed in an area with good air circulation.

4.3 Initial Cleaning

Before first use, it is recommended to clean the ice maker. Refer to the "Maintenance and Cleaning" section for detailed instructions on using the auto-cleaning function.

5. Operating Instructions

5.1 Control Panel Overview

The control panel is located on the top of the unit and features indicator lights and buttons for easy operation.

  • MAKING ICE Indicator: Illuminates when the unit is actively producing ice.
  • ICE FULL Indicator: Illuminates when the ice basket is full, pausing ice production.
  • ADD WATER Indicator: Illuminates when the water tank needs refilling.
  • POWER Button: Press to turn the unit ON or OFF.
  • CLEAN Button (Hold for 3 Sec): Press and hold for 3 seconds to activate the self-cleaning function.
Control Panel of Aeitto Nugget Ice Maker with indicators for Making Ice, Ice Full, Add Water, Power, and Clean

Figure 5.1: Control Panel.

5.2 Making Ice

  1. Open the top lid and remove the ice basket.
  2. Fill the water tank with potable water up to the MAX fill line. Do not overfill.
  3. Place the ice basket back into the unit and close the top lid.
  4. Plug the power cord into a grounded electrical outlet.
  5. Press the POWER button to turn on the ice maker. The "MAKING ICE" indicator will illuminate.
  6. The first batch of ice will be ready in approximately 5 minutes. Subsequent batches may be faster.
  7. When the "ICE FULL" indicator illuminates, ice production will pause. Remove ice from the basket to resume production.
  8. When the "ADD WATER" indicator illuminates, the water tank is low. Refill the tank to continue ice production.
  9. To stop ice production, press the POWER button.

Note: The ice maker does not have a refrigeration function for storing ice long-term. It is recommended to transfer ice to a freezer for storage or use it immediately.

Aeitto Nugget Ice Maker with the ice basket and water tank visible

Figure 5.2: Water Tank and Ice Basket.

Close-up of chewable nugget ice produced by the machine

Figure 5.3: Chewable Nugget Ice.

6. Maintenance and Cleaning

6.1 Auto-Cleaning Function

The ice maker features an automatic self-cleaning cycle to help maintain hygiene and prevent mineral buildup.

  1. Ensure the unit is empty of ice and water.
  2. Fill the water tank with clean water up to the MAX fill line. For descaling, a descaling solution (e.g., citric acid solution) can be added as per the solution's instructions.
  3. Press and hold the CLEAN button for 3 seconds. The cleaning cycle will begin.
  4. The cleaning cycle typically lasts for a set duration (e.g., 20-30 minutes). The unit will circulate water to clean internal components.
  5. Once the cycle is complete, drain the water from the unit. Refer to the user manual for specific draining instructions (usually a drain plug at the bottom or back).
  6. Rinse the water tank and ice basket thoroughly with clean water.
  7. Perform a second cleaning cycle with only clean water to rinse out any residual cleaning solution.
  8. Drain and dry the unit completely before storage or next use.
Diagram showing the auto-cleaning function of the ice maker

Figure 6.1: Auto-Cleaning Function.

6.2 External Cleaning

  • Wipe the exterior of the ice maker with a soft, damp cloth.
  • Do not use abrasive cleaners or solvents that could damage the stainless steel housing.
  • Ensure the unit is unplugged before cleaning.

7. Troubleshooting

ProblemPossible CauseSolution
Ice maker not producing ice.
  • No water in the tank.
  • Unit not powered on.
  • Ambient temperature too high.
  • Ice full sensor activated.
  • Fill water tank.
  • Press the POWER button.
  • Move unit to a cooler location.
  • Remove ice from the basket.
"ADD WATER" indicator is on.Water tank is empty or low.Refill the water tank with potable water.
"ICE FULL" indicator is on.Ice basket is full.Remove ice from the basket. Ice production will resume automatically.
Ice has an unusual taste or odor.
  • First use.
  • Unit needs cleaning.
  • Stale water.
  • Perform initial cleaning.
  • Run auto-cleaning cycle.
  • Drain and refill with fresh water.
Unit is noisy during operation.Normal operation sounds (compressor, water pump).Some operational noise is normal. Ensure unit is on a stable surface. If noise is excessive or unusual, contact customer support.

8. Specifications

FeatureDetail
BrandAeitto
Model NameZBJ116
Product Dimensions (D x W x H)16.9" x 9.84" x 16.9"
Weight32.6 Pounds
Ice Production CapacityUp to 55 lbs / 24 hours
Water Tank Capacity3.6 Liters
Ice Basket Capacity3.2 lbs
RefrigerantR600a

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact Aeitto customer support. Refer to the product packaging or the official Aeitto website for contact details.

Website: Visit the Aeitto Store on Amazon

© 2025 Aeitto. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.