1. Introduction
This manual provides essential instructions for the safe operation, assembly, and maintenance of your Genesis Designs Smart Full Body Massage Chair, model GM1-W. Please read this manual thoroughly before using the product to ensure proper function and to prevent injury or damage.
The Genesis Designs GM1-W massage chair features 2D SL-track rollers, voice activation, a tablet remote control, 12 auto pre-programmed modes, and 6 massage techniques. It includes a zero-gravity function, built-in Bluetooth speakers, and a USB charging port. Airbag massage is provided for the shoulders, arms, waist, legs, and feet, along with a heated lumbar function and foot rollers.
2. Important Safety Information
WARNING: To reduce the risk of electric shock, burns, fire, or injury, always follow these basic precautions:
- Read all instructions before using the massage chair.
- Do not use attachments not recommended by the manufacturer.
- Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
- Close supervision is necessary when this product is used by, on, or near children, invalids, or disabled persons.
- Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
- Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
- Keep the cord away from heated surfaces.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the OFF position, then remove plug from outlet.
- This appliance is intended for household use only.
- Consult a physician before using if you have any medical conditions, are pregnant, or have a pacemaker.
3. Package Contents
Verify that all components are present in the packaging:
- Genesis Designs GM1-W Massage Chair (Main Unit)
- Tablet Remote Control
- Power Cord
- User Manual (this document)
Figure 3.1: "In The Box" diagram illustrating the main chair unit, the tablet remote control, and the power cord.
4. Setup and Assembly
The Genesis Designs GM1-W massage chair typically arrives partially assembled. Follow these steps for final assembly and placement.
4.1 Unpacking and Placement
- Carefully remove all packaging materials. It is recommended to retain packaging for future transport or service.
- Position the chair in a suitable location. Ensure there is enough space around the chair for full recline, especially for the zero-gravity function. The chair requires approximately 66.33 inches in length when fully reclined.
- Ensure the chair is placed on a level surface.
Figure 4.1: Front-side view of the Genesis Designs GM1-W massage chair.
Figure 4.2: Side view of the Genesis Designs GM1-W massage chair, illustrating its profile.
4.2 Connecting Power
- Locate the power input port on the back or bottom of the chair.
- Connect the power cord securely to the chair.
- Plug the other end of the power cord into a grounded electrical outlet.
5. Operating Instructions
Your Genesis Designs GM1-W massage chair offers various functions for a personalized massage experience.
5.1 Controls Overview
The chair can be controlled via the handheld tablet remote or the quick-start buttons on the right armrest.
Figure 5.1: Handheld tablet remote control interface.
Figure 5.2: Quick-start control panel on the right armrest.
5.2 Starting a Massage
- Sit comfortably in the chair.
- Press the Power button on the tablet remote or the quick-start panel.
- Select one of the 12 auto pre-programmed modes or choose from 6 massage techniques using the tablet remote.
5.3 Key Features and Functions
- 2D SL-Track Rollers: The massage rollers follow the natural curve of your spine, extending from your neck to your thighs, providing a comprehensive massage.
- Zero Gravity Function: Activate zero gravity mode to recline the chair to a position that elevates your legs above your heart, reducing pressure on your spine and enhancing relaxation. The chair offers multiple recline levels.
Figure 5.3: Illustration of the chair's zero gravity recline positions.
- Voice Activation: Use voice commands to control various functions of the massage chair. Refer to the tablet remote interface for specific voice commands.
- Airbag Massage: Airbags located in the shoulders, arms, waist, legs, and feet inflate and deflate to provide compression massage. Adjust intensity via the tablet remote.
- Heated Lumbar Function: Activate the heating function for the lower back to soothe muscles and enhance relaxation.
- Foot Massage: The legrest can extend up to 6.25 inches to accommodate different user heights. Foot rollers provide a targeted massage to the soles of your feet.
Figure 5.4: Detail of the footrest with integrated foot rollers.
- Bluetooth Speakers: Connect your personal device via Bluetooth to enjoy audio during your massage.
- Enable Bluetooth on your device.
- Search for "Genesis Massage Chair" or similar on your device's Bluetooth settings.
- Pair and connect.
- USB Charging Port: A convenient USB port is available for charging your mobile devices.
Figure 5.5: Overview of main features and their locations on the chair.
6. Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your massage chair.
6.1 Cleaning
- Exterior: Wipe clean with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the upholstery.
- Interior: Periodically vacuum any dust or debris from crevices.
- Ensure the chair is unplugged before cleaning.
6.2 Storage
If storing the chair for an extended period, unplug it and cover it to protect from dust and moisture. Store in a cool, dry place.
7. Troubleshooting
If you encounter issues with your massage chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not power on. | Power cord not securely plugged in. No power from outlet. | Check power cord connection to chair and outlet. Test outlet with another device. |
| Massage rollers are not moving. | Chair is in standby mode. Program not selected. | Ensure chair is powered on. Select an auto program or manual massage technique. |
| Bluetooth not connecting. | Bluetooth on device is off. Chair's Bluetooth is off or not discoverable. | Ensure Bluetooth is enabled on your device. Check tablet remote for Bluetooth activation. Try restarting both devices. |
| Voice activation not responding. | Microphone obstructed. Incorrect commands. | Ensure no obstructions near the microphone. Speak clearly and use the specified voice commands. |
| Unusual noises during operation. | Normal operational sounds. Loose component. | Some motor and airbag sounds are normal. If noise is excessive or new, discontinue use and contact customer support. |
If the problem persists after attempting these solutions, please contact Genesis Designs customer support for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | GM1-W |
| Brand | Genesis Designs |
| Massage Track | 2D SL-Track |
| Upright Dimensions (L x W x H) | 57.67 x 29.72 x 44.33 inches |
| Zero Gravity Dimensions (L x W x H) | 66.33 x 29.72 x 38.77 inches |
| Product Weight | 165 Pounds |
| Seat Width | 21 inches |
| Legrest Extension | Up to 6.25 inches |
| Massage Programs | 12 Auto Modes, 6 Manual Techniques |
| Special Features | Voice Activation, Bluetooth Speakers, USB Charging, Heated Lumbar, Foot Rollers |
| Certification | ETL Certified |
| UPC / GTIN | 811691028064 |
Figure 8.1: Dimensional diagram of the massage chair.
9. Warranty and Customer Support
For warranty information, please refer to the documentation included with your purchase or contact Genesis Designs customer support directly. Keep your proof of purchase for warranty claims.
If you require technical assistance, have questions about operation, or need to report a problem, please contact Genesis Designs customer support through their official website or the contact information provided with your product.
