Solareye SV-TCKW

Solareye Trail Camera WiFi User Manual

Model: SV-TCKW

Welcome

Thank you for choosing the Solareye Trail Camera WiFi. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring and surveillance. Please read this manual thoroughly before using the product.

Package Contents

Before you begin, please verify that all items listed below are included in your package:

  • WiFi Trail camera *1
  • Solar panel *1
  • 32GB SD card *1
  • Installation strap *2
  • USB cable *1
  • Screws *8
  • Rubber plug *8
  • Metal base *2
  • Metal bracket *2
  • User manual *1
Contents of the Solareye Trail Camera WiFi package, including the camera, solar panel, SD card, straps, cables, and mounting hardware.

Image: All components included in the Solareye Trail Camera WiFi package.

Initial Setup

Powering the Camera

The Solareye Trail Camera offers multiple power options for extended outdoor use:

  • Built-in 5000mAh Battery: The camera features a rechargeable internal battery. Charge it directly using the included Type-C data cable.
  • Portable Solar Panel: Connect the included solar panel for continuous power, significantly extending the camera's standby time in outdoor environments.
  • AA Battery Pack (Optional): For additional backup and very long battery life, the camera supports an extra AA battery pack (AA batteries not included).
Solareye Trail Camera showing solar panel connection, Type-C charging port, and AA battery compartment.

Image: Various power options for the Solareye Trail Camera, including solar, Type-C charging, and AA batteries.

Detailed view of the solar panel, AA battery compartment, Type-C charging port, and DC power input for the trail camera.

Image: Visual guide to the different power input methods for the camera.

Inserting the SD Card

The camera supports micro memory cards up to 256GB. A 32GB Micro SD card is included in the package. Insert the SD card into the designated slot before operation.

Quick Installation Steps

  1. Install 4 AA batteries (if using as backup power).
  2. Insert the included 32GB SD card into the card slot.
  3. Set camera parameters using the built-in LCD screen or via the app.
  4. Switch the camera to 'TEST' mode for initial setup, then to 'ON' for motion detection mode.

Note: For first-time use, switch to 'TEST' mode to set working mode, parameters, and view videos/photos. After 10 seconds, the screen turns off, and the camera switches to motion detection mode when set to 'ON'.

Diagram showing the steps for quick installation: installing AA batteries, inserting the SD card, and setting camera parameters.

Image: Visual guide for quick installation, including battery and SD card insertion.

App Connection and Control

The Solareye Trail Camera features built-in WiFi and Bluetooth for convenient control via the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.