1. Introduction
Thank you for choosing the DEWENWILS Wireless Remote Control Outlet Kit. This kit provides a convenient and efficient way to control your household appliances remotely. Designed for ease of use, it features pre-paired outlets and remotes, a strong signal, and built-in safety features. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
2. Product Overview
2.1 Package Contents
- 5 x DEWENWILS Wireless Remote Control Outlets
- 2 x DEWENWILS Remote Controls
Image 2.1: The DEWENWILS Wireless Remote Control Outlet Kit, including five compact outlets and two remote controls.
2.2 Key Features
- One-Click Control: Control up to 5 individual outlets or all connected devices simultaneously with a single button press.
- Powerful RF Signal: Operates at 433.92 MHz, offering a long range of up to 30 meters (100 feet) in open areas. The signal can penetrate walls and doors without interference.
- Pre-Paired & Ready to Use: The outlets and remotes come pre-paired from the factory, requiring no complex setup.
- Energy Saving: Helps reduce standby power consumption of connected appliances, contributing to lower electricity bills.
- High Quality & Safety: Supports a maximum load of 10A/2300W. Features integrated child safety mechanisms and is constructed from high-quality, fire-retardant plastic.
3. Setup Instructions
The DEWENWILS Wireless Remote Control Outlet Kit is designed for immediate use as the outlets and remotes are pre-paired.
- Unpack: Carefully remove all components from the packaging.
- Insert Remote Batteries: Open the battery compartment on the back of each remote control and insert the required batteries (typically 12V 23A, not always included, check packaging). Ensure correct polarity.
- Plug in Outlets: Plug a DEWENWILS remote control outlet into a standard wall socket.
- Connect Appliance: Plug the appliance you wish to control into the DEWENWILS remote control outlet.
- Test: Use the corresponding button on the remote control to turn the connected appliance ON or OFF.
Image 3.1: A remote control being used to activate an appliance plugged into a DEWENWILS remote outlet, simplifying daily tasks.
4. Operating Instructions
Each remote control has numbered buttons (1-5) corresponding to the outlets, and an 'ON' and 'OFF' button for overall control.
- Individual Control: Press the numbered button (e.g., '1') to turn on the corresponding outlet, and press it again to turn it off.
- All ON/OFF: Press the 'ON' button on the remote to turn on all paired outlets simultaneously. Press the 'OFF' button to turn off all paired outlets simultaneously.
- Range: The remote control can operate devices up to 30 meters (100 feet) away in open areas, even through walls and doors.
Image 4.1: Demonstrates the programmable and extensible nature of the system, allowing control of multiple devices from a single remote.
5. Maintenance
To ensure the longevity and optimal performance of your DEWENWILS Wireless Remote Control Outlet Kit, follow these simple maintenance guidelines:
- Cleaning: Wipe the outlets and remote controls with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Replacement: Replace the remote control batteries when the signal weakens or the remote stops responding. Dispose of old batteries responsibly.
- Environmental Conditions: Avoid exposing the devices to water, high humidity, or corrosive environments. The operating temperature range is -25°C to 40°C.
6. Troubleshooting
If you encounter issues with your DEWENWILS Wireless Remote Control Outlet Kit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Outlet not responding to remote. | Low remote battery, outlet unplugged, appliance off, interference. | Replace remote battery. Ensure outlet is securely plugged in and appliance is switched on. Move closer to the outlet or away from potential interference sources. |
| Remote range is shorter than expected. | Obstructions (thick walls), interference, low remote battery. | Replace remote battery. Reduce obstructions between remote and outlet. Avoid placing near large metal objects or other wireless devices. |
| All outlets turn ON/OFF when only one is intended. | Using the 'ON' or 'OFF' master button instead of individual numbered buttons. | Ensure you are pressing the specific numbered button for the desired outlet. |
| Outlet LED indicator is off. | No power to the outlet. | Check the wall socket for power. Ensure the outlet is fully inserted. |
6.1 Re-pairing Instructions (If necessary)
While the units are pre-paired, if you need to re-pair an outlet to a remote button or pair a new remote, follow these steps:
- Plug the outlet into a wall socket.
- Press and hold the small learning button on the side of the outlet until its indicator light starts flashing.
- Within 5 seconds, press the desired 'ON' or 'OFF' button (or a numbered button) on the remote control. The outlet's indicator light will stop flashing and remain solid, indicating successful pairing.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | e9f6439e-c124-452a-ad4a-aa4e319d5dfe |
| Dimensions (L x W x H) | 50 x 48 x 70 mm (Outlet) |
| Weight | Approximately 630 grams (Total kit) |
| Operating Mode | ON-OFF |
| Current Rating | 10 A |
| Operating Voltage | 230 Volts |
| Max Load Power | 2300 W |
| Wireless Frequency | 433.92 MHz |
| Wireless Range | Up to 30 meters (100 feet) in open area |
| Material | Plastic (Fire-retardant) |
| Operating Temperature | -25°C to 40°C |
Image 7.1: Detailed dimensions of the DEWENWILS remote outlet and its corresponding remote control.
8. Safety Information
- Do not exceed the maximum load capacity of 10A or 2300W. Overloading can cause overheating and potential fire hazards.
- Ensure the product is used within the specified operating temperature range of -25°C to 40°C.
- The outlets feature child safety shutters to prevent accidental contact with live parts. However, always supervise children around electrical devices.
- Do not disassemble or modify the product. Refer all servicing to qualified personnel.
- Keep the product away from water and damp environments.
- Always ensure the appliance connected to the remote outlet is in good working condition.
Image 8.1: Illustration of the child safety feature integrated into the DEWENWILS remote outlets.
9. Warranty and Support
DEWENWILS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the product packaging or contact DEWENWILS customer service directly. Please have your model number (e9f6439e-c124-452a-ad4a-aa4e35460e0e) available when contacting support.
