Timex Men's Essex Avenue Day-Date 44mm Quartz Watch Instruction Manual

Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your Timex Men's Essex Avenue Day-Date 44mm Quartz Watch. Please read this guide thoroughly to ensure proper use and longevity of your timepiece.

Setup

Setting the Time

1. Pull the crown (located on the right side of the watch case) out to position 3.
2. Rotate the crown clockwise or counter-clockwise to move the hour and minute hands until the desired time is displayed.
3. Push the crown back into position 1 to engage the movement and start the watch.

Setting the Day and Date

1. Pull the crown out to position 2.
2. Rotate the crown clockwise to adjust the date.
3. Rotate the crown counter-clockwise to adjust the day.
4. Once the correct day and date are set, push the crown back into position 1.

Figure 1: Front view of the Timex Essex Avenue Day-Date watch, showing the dial, hands, and crown on the right side.

Operating

Water Resistance

This watch is water resistant up to 50 meters (164 feet). This rating makes it suitable for short periods of recreational swimming, but it is not recommended for diving or prolonged water activities. Do not operate the crown or pushers while the watch is wet or submerged.

General Use

Your Timex watch is designed for daily wear. Avoid exposing it to extreme temperatures, strong magnetic fields, or harsh chemicals, as these can affect its accuracy and appearance.

Figure 2: Side view of the Timex Essex Avenue Day-Date watch, highlighting the watch case thickness and crown.

Maintenance

Cleaning

To clean your watch, wipe the case and bracelet with a soft, damp cloth. For metal bracelets, a soft brush can be used to remove dirt from between links. Avoid using abrasive cleaners or solvents.

Battery Replacement

This watch is powered by a quartz movement, which requires a battery. When the watch stops running, the battery needs to be replaced. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Figure 3: Close-up of the watch case back, showing engraved details including water resistance rating and brand information.

Troubleshooting

• Watch not running: Check if the crown is fully pushed in (position 1). If it is, the battery may need replacement.
• Incorrect time/date: Refer to the 'Setting the Time' and 'Setting the Day and Date' sections to reset.
• Condensation under crystal: This may indicate a loss of water resistance. Avoid further contact with water and seek professional service.

Specifications

Warranty and Support

Your Timex watch is covered by a limited warranty. For specific warranty details, registration, and customer support, please visit the official Timex website or contact their customer service department. Keep your proof of purchase for warranty claims.

For additional assistance or to locate an authorized service center, please visit: www.timex.com