Introduction
The Xtreme Locator Tag is a Bluetooth item finder designed to help you keep track of your valuables using the Apple Find My app on your iOS device. This manual provides instructions for setting up, operating, and maintaining your Locator Tag.
Key features include compatibility with Apple Find My, a 100dB alert ring, a 12-month replaceable battery, and disconnect notifications.
Image: The Xtreme Locator Tag, a small white square device with a keychain ring, displayed alongside the "Works with Apple Find My" logo, indicating its compatibility with Apple's tracking network.
Setup
Follow these steps to pair your Xtreme Locator Tag with your Apple iOS device:
- Ensure your iOS device (iPhone or iPad) has Bluetooth enabled and the Apple Find My app is installed and updated to the latest version.
- Open the Find My app on your iOS device.
- Navigate to the Items tab.
- Tap Add Item, then select Other Supported Item.
- Press and hold the button on your Xtreme Locator Tag for approximately 3 seconds until you hear a beep sound.
- On your iOS device, tap Add Item and Other Supported Item again if prompted.
- The pairing process should complete within seconds. Follow any on-screen instructions to name your tag and assign an emoji.
Image: A close-up view of the Xtreme Locator Tag, highlighting the small circular button on its surface used for pairing and activation.
Operating Instructions
Locating Your Item
Once paired, you can locate your tagged items using the Apple Find My app:
- Open the Find My app on your iOS device.
- Select the Items tab.
- Tap on the name of your Xtreme Locator Tag.
- To play a sound on the tag, tap Play Sound. The tag will emit a loud 100dB alert ring to help you find it quickly.
- The app will display the tag's last known location on a map. If the tag is nearby, you may see an option for Find Nearby (Precision Finding, if supported by your device and the tag's capabilities).
Image: An Xtreme Locator Tag attached to a set of car keys, demonstrating its use for tracking personal items.
Disconnect Notifications
The Xtreme Locator Tag provides disconnect notifications. If your tag loses connection with your iOS device (e.g., you leave an item behind), you will receive an alert on your device, helping you prevent loss.
Image: An Xtreme Locator Tag clipped to the zipper of a brown sports bag, illustrating its versatility for tracking various belongings.
Maintenance
Battery Replacement
The Xtreme Locator Tag uses a replaceable CR2032 coin cell battery, which typically lasts up to 12 months. When the battery level is low, you will receive a notification in the Find My app.
To replace the battery:
- Locate the battery compartment on the back of the Xtreme Locator Tag.
- Carefully open the compartment cover. You may need a small tool (e.g., a coin or flathead screwdriver) to gently pry it open.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Close the battery compartment cover securely.
Important: Dispose of used batteries responsibly according to local regulations. Keep new and used batteries out of reach of children.
Troubleshooting
- Tag does not pair with iOS device:
- Ensure Bluetooth is enabled on your iOS device.
- Make sure the Find My app is updated to the latest version.
- Check the battery level of the Locator Tag. Replace the CR2032 battery if it is low or depleted.
- Try restarting your iOS device.
- Ensure you are pressing and holding the tag's button for the correct duration (3 seconds) until a beep is heard during the pairing process.
- Cannot hear the 100dB alert ring:
- Verify that the tag is within Bluetooth range of your iOS device or within the Find My network.
- Check the battery level of the Locator Tag. A low battery might affect the sound output.
- If the tag is connected but not playing sound, try disconnecting and re-pairing the tag.
- Ensure your iOS device's volume is not muted or too low.
- Location updates are inaccurate or infrequent:
- The accuracy of location tracking depends on the density of the Apple Find My network in the area. In areas with fewer Apple devices, updates may be less frequent.
- Ensure your iOS device has a stable internet connection (Wi-Fi or cellular data) for the Find My app to receive location updates.
- If the tag is out of range of your device, its location will only update when it comes into contact with another device in the Find My network.
Specifications
| Model Number | B0DFQKSRLJ |
| Connectivity | Bluetooth |
| Compatible Devices | iPhone, iPad (iOS only) |
| Alert Volume | 100dB |
| Battery Type | 1 x CR2032 (included, replaceable) |
| Battery Life | Up to 12 months |
| Material | Plastic |
| Item Weight | 1.23 ounces |
| Dimensions | 7.28 x 3.03 x 0.83 inches (Package Dimensions) |
| Manufacturer | Jem Accessories |
Warranty and Support
Warranty information for the Xtreme Locator Tag is typically provided with your purchase documentation. Please refer to the packaging or contact your retailer for specific warranty terms and conditions.
For technical support or further assistance, please contact XTREME DIGITAL LIFESTYLE ACCESSORIES customer service. Contact details can usually be found on the product packaging or the official brand website.
