1. Introduction
The Cruise On 2-in-1 Wireless CarPlay & Android Auto Adapter is designed to convert your vehicle's existing wired CarPlay or Android Auto system into a wireless connection. This device allows for a seamless and convenient experience, enabling you to use your smartphone's features on your car's display without the need for cables.
This adapter supports both Apple CarPlay and Android Auto, offering a flexible solution for various smartphone users. It features a 5 GHz WiFi chip for fast and stable connectivity, and supports Over-The-Air (OTA) updates for continuous improvement.
2. Package Contents
- 1 x Cruise On 2-in-1 Wireless CarPlay & Android Auto Adapter
- 1 x USB-A to USB-C Adapter (for compatibility with various car ports)
3. Setup and Installation
Before installation, ensure your vehicle is equipped with a factory-installed wired CarPlay or Android Auto system. This adapter is designed to convert an existing wired connection to wireless.
- Connect the Adapter: Locate the USB port in your car that supports wired CarPlay or Android Auto. Plug the Cruise On adapter into this USB port. If your car has a USB-C port, use the provided USB-A to USB-C adapter.
- Initial Pairing:
- On your smartphone, enable Bluetooth and Wi-Fi.
- Search for the adapter's Bluetooth signal (usually named "SmartBox" or similar) and pair with it.
- Follow any on-screen prompts on your car's display or smartphone to complete the connection.
- Automatic Connection: Once successfully paired for the first time, the adapter will automatically connect to your smartphone whenever you start your car, provided Bluetooth and Wi-Fi are enabled on your phone.
Image: The adapter connects to your car's existing USB port, converting the wired CarPlay/Android Auto connection to wireless.
Image: The adapter integrates seamlessly into your car's interior, providing wireless connectivity.
4. Operating Instructions
After successful setup, your car's display will show the CarPlay or Android Auto interface wirelessly.
- Switching Between CarPlay and Android Auto: The adapter allows for a one-click switch between CarPlay and Android Auto modes. Refer to your car's display or the adapter's interface for the specific switching method.
- Retaining Car Controls: The adapter is designed to maintain full functionality of your car's original controls, including steering wheel buttons, touch screen, touchpad, and voice commands (e.g., Siri).
- Using Smartphone Features: You can access navigation, make calls, send and receive messages, and enjoy music directly from your car's integrated screen, all wirelessly.
Image: Seamlessly switch between Wireless CarPlay and Android Auto on your car's display.
Image: Interact with your car's screen to control navigation, music, and calls wirelessly.
5. Compatibility
- Vehicle Compatibility: Compatible with most car models from 2016 and later that have factory-installed wired iOS CarPlay or Android Auto.
- Smartphone Compatibility:
- For Android Auto: Android 11 or later.
- For CarPlay: iOS 8 or later.
- Important Note: This adapter is not supported for Huawei and Xiaomi phones.
- For a comprehensive list of compatible CarPlay models, please refer to the official Apple website: https://www.apple.com/ios/carplay/models-available
6. Troubleshooting
If you encounter issues, please refer to the following common solutions:
- No Connection / Slow Connection:
- Ensure your car's wired CarPlay or Android Auto functions correctly without the adapter first.
- Verify that Bluetooth and Wi-Fi are enabled on your smartphone.
- Try restarting your car's infotainment system and your smartphone.
- Unplug and re-plug the adapter into the car's USB port.
- Check for any available OTA updates for the adapter (refer to the manufacturer's website or app for instructions).
- Display Issues (e.g., distorted image, resolution problems):
- Ensure your car's display resolution is supported by the adapter. While the adapter aims for broad compatibility, some specific car models might have unique display configurations.
- Check for firmware updates for the adapter, as these often include compatibility improvements.
- Audio Latency:
- Minor audio latency can sometimes occur with wireless connections. Ensure your smartphone is close to the adapter and there are no significant obstructions.
- Restarting the connection or the car's infotainment system may help.
- Adapter Not Recognized:
- Try a different USB port in your car, if available.
- Ensure the USB port provides sufficient power (typically 5V/1A).
7. Specifications
| Model Number | 2024-carplay-2 in 1 |
| Device Body Dimensions (L x W x T) | Approx. 5.3 x 1.57 x 0.35 inches (13.5 x 4.0 x 0.9 cm) |
| Overall Product Dimensions (L x W x H) | 7.3 x 1.6 x 15.4 cm (2.87 x 0.63 x 6.06 inches) - Note: May include cable length. |
| Connectivity | USB-A, USB-C (via adapter), 5 GHz WiFi, Bluetooth |
| Number of Ports | 2 (USB-A and USB-C input options) |
| Color | Silver Black |
| Finish Type | Metallic |
| Power Input | 5V/1A (typical USB power) |
Image: Physical dimensions of the adapter's main body for reference.
Image: The adapter supports both USB-A and USB-C connections using the included adapter.
8. Maintenance
- Keep the adapter clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
- Do not attempt to disassemble or repair the adapter yourself, as this will void the warranty.
9. Warranty and Support
Cruise On offers lifetime technical support and a one-year replacement warranty for this wireless CarPlay and Android Auto adapter.
If you encounter any installation or usage problems, please contact Cruise On customer support for assistance. We are committed to resolving your issues promptly and effectively.
For support, please refer to the contact information provided with your product packaging or visit the official Cruise On website.