NetumScan USB Line for Barcode Scanner User Manual

1. Introduction

This manual provides instructions for the NetumScan USB Line (Micro B), designed for connecting compatible barcode scanners to host devices. Please read this manual carefully before use to ensure proper installation and operation.

2. Product Overview

The NetumScan USB Line (Micro B) is a data and power transfer cable featuring a standard USB-A connector on one end and a Micro-B connector on the other. It is specifically designed for use with NetumScan L-Series barcode scanners such as the NSL6, NSL8, and NSL8BLS, facilitating reliable communication and power supply between the scanner and a computer.

Image showing the NetumScan USB cable. One end features a standard USB-A connector, and the other end features a Micro-B connector. The cable is black.

3. Setup

1. Identify the USB port on your barcode scanner. This cable is compatible with Micro-B ports.
2. Insert the Micro-B end of the cable into the corresponding port on your NetumScan barcode scanner.
3. Insert the standard USB-A end of the cable into an available USB port on your computer (desktop or laptop).
4. Ensure both connections are secure. The scanner should now be recognized by your computer.

4. Operating Instructions

Once connected, the NetumScan USB Line facilitates data transfer between your barcode scanner and the host device. No additional software or drivers are typically required for basic operation, as the cable acts as a physical conduit for communication and power. The scanner will draw power and transmit data through this cable.

5. Maintenance

• To ensure longevity, handle the cable by the connectors, not by pulling the cable itself.
• Avoid sharp bends or kinks in the cable, which can damage internal wires.
• Store the cable in a clean, dry environment when not in use.
• Clean connectors gently with a dry, lint-free cloth if necessary to maintain optimal conductivity.

6. Troubleshooting

• Scanner Not Connecting:
  • Ensure both ends of the cable are securely plugged in.
  • Try connecting the cable to a different USB port on your computer.
  • Verify that your barcode scanner is powered on (if applicable).
  • Test the cable with another compatible device or try a different cable if available to isolate the issue.
• Intermittent Connection:
  • Check for any physical damage to the cable or connectors.
  • Ensure the cable is not stretched or under tension during use.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your NetumScan barcode scanner or visit the official NetumScan website. You may also contact NetumScan customer service for further assistance with this USB Line.