Blaupunkt ATOMIK OMG 75W Party Bluetooth Speaker Instruction Manual

Introduction

Thank you for choosing the Blaupunkt ATOMIK OMG 75W Party Bluetooth Speaker. This portable speaker combines powerful audio with vibrant neon lights, designed for both indoor and outdoor use. Featuring a robust 75W sound output, quad batteries for extended playtime, and IPX6 splash and dust proofing, the ATOMIK OMG is built to deliver an immersive audio experience. Please read this manual carefully to ensure proper use and maintenance of your device.

What's in the Box

• Blaupunkt ATOMIK OMG 75W Party Bluetooth Speaker (Boombox)
• Charging Cable
• Auxiliary Cable
• User Manual

Product Overview

Familiarize yourself with the various parts and controls of your Blaupunkt ATOMIK OMG speaker.

Image: Top view of the Blaupunkt ATOMIK OMG speaker, highlighting the control panel. Buttons include power, play/pause, volume up/down, mode selection, and light effect control.

Image: Rear view of the Blaupunkt ATOMIK OMG speaker, displaying the protective flap covering the input ports. These ports typically include USB, TF card slot, AUX-in, and charging port.

Control Panel:

• Power Button: Press and hold to turn the speaker ON/OFF.
• Play/Pause Button: Press to play or pause audio.
• Volume Up (+): Press to increase volume. Hold to skip to the next track.
• Volume Down (-): Press to decrease volume. Hold to go to the previous track.
• Mode Button (M): Press to switch between Bluetooth, AUX, USB, and TF card modes.
• Light Button: Press to cycle through different neon light patterns or turn them off.

Input Ports (located under protective flap):

• USB Port: For USB drive playback.
• TF Card Slot: For TF (MicroSD) card playback.
• AUX-in Port: For connecting external audio devices via a 3.5mm audio cable.
• Charging Port: For connecting the charging cable.

Setup

Initial Charging:

1. Before first use, fully charge the speaker.
2. Connect the charging cable to the speaker's charging port and a suitable USB power adapter (not included).
3. The charging indicator will show the charging status. Once fully charged, the indicator may change or turn off.

Image: The Blaupunkt ATOMIK OMG speaker, illustrating its quad 1800mAh batteries for extended playtime.

Operating Instructions

Power On/Off:

• To power on, press and hold the Power button until the speaker indicates it's on (e.g., a sound prompt or lights activate).
• To power off, press and hold the Power button again until the speaker indicates it's off.

Bluetooth Pairing:

1. Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing light or sound prompt.
2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
3. Search for "Blaupunkt ATOMIK OMG" in the list of available Bluetooth devices.
4. Select the speaker to connect. Once connected, the speaker will provide an audio confirmation.
5. If prompted for a password, enter "0000".

Auxiliary Input (AUX):

1. Connect one end of the 3.5mm audio cable to the AUX-in port on the speaker.
2. Connect the other end to the audio output jack of your external device.
3. Press the Mode button on the speaker until it switches to AUX mode.
4. Audio will now play through the speaker from your connected device.

USB/TF Card Playback:

1. Insert a USB drive or TF (MicroSD) card into the respective port on the speaker.
2. The speaker will automatically detect the storage device and begin playing audio files.
3. If it does not start automatically, press the Mode button to switch to USB or TF card mode.

True Wireless Stereo (TWS) Pairing:

TWS allows you to pair two Blaupunkt ATOMIK OMG speakers together for a stereo sound experience.

1. Ensure both ATOMIK OMG speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press and hold the TWS pairing button (if available, otherwise refer to specific model instructions for TWS pairing, often a dedicated button or a long press of the Mode button).
3. The primary speaker will search for the secondary speaker. Once connected, both speakers will provide an audio confirmation.
4. Now, connect your mobile device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.
5. Audio will play in stereo through both speakers.

Neon Light Modes:

The speaker features multiple neon light patterns to enhance your listening experience.

• Press the Light button to cycle through the available light modes.
• Continue pressing to find your preferred pattern or to turn the lights off.

Image: The Blaupunkt ATOMIK OMG speaker showcasing its dynamic neon light effects.

Charging

The Blaupunkt ATOMIK OMG speaker is equipped with four 1800mAh batteries, totaling 7200mAh, providing an average playtime of 12 hours.

1. When the battery is low, the speaker may provide an audio prompt or a visual indicator.
2. Connect the provided charging cable to the speaker's charging port and a standard USB power source (e.g., wall adapter, computer USB port).
3. The charging indicator will illuminate during charging.
4. Charging time may vary. Disconnect the charger once fully charged to preserve battery life.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
• Water and Dust Resistance: The speaker is IPX6 rated, meaning it is protected against high-pressure water jets from any direction and is dust-tight. However, it is not designed for submersion in water. Ensure the protective flap over the ports is securely closed when exposed to water or dust.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.

Image: The Blaupunkt ATOMIK OMG speaker positioned outdoors near water, demonstrating its IPX6 water and dust resistance.

Troubleshooting

Specifications

Warranty

The Blaupunkt ATOMIK OMG speaker comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your purchase receipt for warranty claims.

Support

For technical assistance, warranty claims, or any other inquiries, please contact Blaupunkt customer support:

• Customer Care WhatsApp Support: +91 8860022600
• Importer Contact Information: Envent Worldwide Pvt Ltd, 105-107, 1st Floor, Tower B4 Spaze ITech Park, Sohna Road Sector-49, Gurgaon
• Manufacturer Contact Information: Envent Worldwide Pvt Ltd