CYCLAMI A2MAX Mini Electric Bike Pump Instruction Manual

1. Introduction

Thank you for choosing the CYCLAMI A2MAX Mini Electric Bike Pump. This portable and powerful inflator is designed for convenient and efficient inflation of bicycle tires, and other inflatables. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.

Safety Information

• Keep out of reach of children.
• Do not operate the pump in wet conditions or near flammable liquids/gases.
• Avoid prolonged continuous operation to prevent overheating. Allow the device to cool down if it becomes hot.
• Do not point the inflation nozzle at people or animals.
• Ensure the correct pressure setting for the item being inflated to prevent over-inflation and potential damage.
• Use only the provided or approved charging cable.

2. Package Contents

Verify that all items are present in the package:

• CYCLAMI A2MAX Mini Electric Bike Pump
• Inflation Hose with Presta/Schrader Valve Adapter
• Type-C Charging Cable
• Ball Needle Adapter
• Swimming Ring Nozzle
• User Manual (this document)

Image: The CYCLAMI A2MAX pump shown with its various accessories, including the inflation hose, charging cable, and different valve adapters.

3. Product Overview

The CYCLAMI A2MAX is a compact and powerful electric air pump featuring a digital display and intuitive controls.

Image: The compact CYCLAMI A2MAX pump, designed to fit comfortably in one hand, showcasing its digital display and control buttons.

Key Features:

• High Performance Motor: Capable of inflating up to 150 PSI.
• Digital Display: Shows real-time pressure and target pressure.
• Automatic Shut-off: Stops inflation once the preset pressure is reached.
• Type-C Rechargeable: Convenient charging.
• Compact Design: Easy to carry and store.

4. Setup

4.1 Charging the Pump

1. Connect the included Type-C charging cable to the charging port on the pump.
2. Connect the other end of the cable to a standard USB power adapter (not included) or a USB port.
3. The battery indicator on the display will show charging status. A full charge typically takes approximately 70 minutes.
4. Disconnect the charger once fully charged.

4.2 Attaching the Valve Adapter

The pump comes with an inflation hose that supports both Presta and Schrader valves.

1. Screw the inflation hose securely onto the pump's air outlet.
2. For Schrader valves, directly screw the hose onto the tire valve.
3. For Presta valves, first unscrew the Presta valve cap on your tire, then screw the Presta adapter onto the valve, and finally attach the inflation hose to the adapter.
4. For other inflatables, attach the appropriate nozzle (ball needle, swimming ring nozzle) to the end of the inflation hose before connecting to the item.

5. Operating Instructions

5.1 Powering On/Off

• To power on, press and hold the power button (⏻) for 2 seconds. The digital display will illuminate.
• To power off, press and hold the power button (⏻) for 2 seconds. The pump will also automatically power off after a period of inactivity.

5.2 Setting Target Pressure

1. After powering on, the display will show the current tire pressure and a preset target pressure (default 100 PSI).
2. Press the + or - buttons to adjust the target pressure. Press and hold for faster adjustment.
3. To switch pressure units (PSI, BAR, KPA), briefly press the unit button (often integrated with the power button or a separate mode button, refer to device markings).

Image: The CYCLAMI A2MAX pump connected to a bicycle tire, displaying the preset target pressure on its screen. Examples of various inflation capacities are shown in the background.

5.3 Starting and Stopping Inflation

1. Ensure the inflation hose is securely connected to both the pump and the item to be inflated.
2. Set your desired target pressure.
3. Press the power button (⏻) once to start inflation. The pump will begin to inflate, and the display will show the real-time pressure.
4. The pump will automatically stop once the target pressure is reached.
5. To manually stop inflation at any time, press the power button (⏻) once.
6. Carefully disconnect the inflation hose from the item and then from the pump.

6. Maintenance

• Cleaning: Wipe the pump with a soft, damp cloth. Do not use harsh chemicals or immerse the pump in water.
• Storage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is partially charged if storing for extended periods.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the battery indicator is low.
• Nozzle Inspection: Periodically check the inflation hose and adapters for any signs of wear or damage. Replace if necessary to ensure efficient inflation.

7. Troubleshooting

8. Specifications

Image: A detailed comparison table highlighting the specifications of the CYCLAMI A2MAX model against other CYCLAMI pump models.

Note: Specifications are subject to change without notice.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official CYCLAMI website. Keep your proof of purchase for warranty claims.