Introduction
Thank you for choosing WallarGe Wireless Headphones. These headphones are designed to provide a high-quality audio experience for TV watching and other Bluetooth-enabled devices, offering comfort and convenience with a long-range connection and no audio delay. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Image: WallarGe Wireless Headphones and USB Transmitter.
What's in the Box
- Wireless Headphones
- USB Transmitter
- Audio Cable (3.5mm)
- RCA Audio Cables
- USB Extension Cord
Setup
The WallarGe Wireless Headphones offer versatile connectivity options for your television and other devices. Please follow the instructions below based on your TV's capabilities.
Connecting to TV via USB (for TVs supporting USB Audio Out)
Approximately 40% of TVs with USB ports support audio decoding directly through the USB port. If your TV supports this feature, follow these steps:
- Plug the USB Transmitter into an available USB port on your TV. Ensure the green signal light on the transmitter illuminates.
- Turn on your WallarGe Wireless Headphones.
- The headphones and transmitter are pre-paired from the factory. Audio should automatically transmit to your headphones.
Image: The USB transmitter connected to a USB port. This connection requires the USB port to support audio output.
Connecting to TV using Audio Cables (for TVs without USB Audio Out)
If your TV's USB port does not support audio output (approximately 60% of TVs), or if you experience low/muddy sound, you will need to use one of the supplied audio cables in conjunction with the USB transmitter for power. The USB transmitter will still need to be plugged into a 5V USB power source (e.g., TV USB port, USB wall adapter) to function.
Choose the appropriate cable based on your TV's available audio output ports:
- Optical Cable: Connect the optical cable from your TV's Optical Audio Out port to the Optical input on the USB transmitter.
- RCA Cable: Connect the red and white RCA plugs from your TV's Audio Out (L/R) ports to the corresponding RCA inputs on the USB transmitter.
- 3.5mm AUX Cable: Connect the 3.5mm AUX cable from your TV's Headphone Out or Audio Out port to the 3.5mm AUX input on the USB transmitter.
After connecting the audio cable, ensure the green signal light on the transmitter is on. Turn on your headphones. If you still experience issues, you may need to adjust your TV's audio settings. Set the TV's audio format to PCM (Pulse-code modulation). This headset does not support stereo sound or Dolby Digital formats.
Image: Various audio cables including Optical, RCA, and 3.5mm AUX, used for connecting the transmitter to the TV's audio output.
Image: Example of a TV's audio settings menu, highlighting the option to set the digital audio output format to PCM.
Bluetooth Pairing (for other devices)
In addition to TV connectivity, these headphones feature Bluetooth 5.3, allowing connection to smartphones, tablets, and other Bluetooth-enabled devices.
- Ensure the headphones are powered on.
- Press the 'BT' button on the headphones to enter Bluetooth pairing mode. The indicator light will flash.
- On your device, go to Bluetooth settings and select 'WallarGe HP007' from the list of available devices.
- Once paired, the indicator light on the headphones will turn solid.
Image: WallarGe headphones being used with a smartphone, demonstrating Bluetooth connectivity.
Official Setup Video
Video: Official WallarGe guide on various ways to connect the HP007 headphones to your TV, including USB audio out, optical, RCA, and AUX connections. This video provides visual instructions for optimal setup.
Operating Instructions
Power On/Off and Volume Control
- To power on the headphones, slide the 'OFF-ON-SIGNAL' switch to the 'ON' position.
- To power off, slide the switch to 'OFF'.
- Adjust volume using the '+' and '-' buttons located on the earcup.
Image: Close-up view of the headphone earcup, showing the power switch and volume controls.
Comfort and Fit
The headphones feature an adjustable headband and soft cotton ear pads for extended comfort during use. Adjust the headband to fit your head comfortably.
Image: Diagram illustrating the comfortable earcups and adjustable headband of the headphones.
Long-Range Listening
The 2.4GHz transmitter provides a stable and reliable connection up to 100 feet (30 meters), allowing you to enjoy audio from your TV from a distance without interruption.
Image: A woman using the headphones while moving freely, demonstrating the 100-foot connection range from the TV.
Maintenance
- Clean the headphones and transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Store the headphones in a cool, dry place when not in use.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound / Extremely low sound / Muddy sound | TV's USB port does not support audio out. Incorrect audio output settings on TV. | Ensure the USB transmitter is powered (e.g., via TV USB or wall adapter). Connect the USB transmitter to your TV using an Optical, RCA, or 3.5mm AUX cable. Navigate to your TV's audio settings and set the digital audio output format to PCM. This headset does not support stereo sound or Dolby Digital. |
| Headphones not pairing via Bluetooth | Headphones not in pairing mode. Device Bluetooth is off. | Press the 'BT' button on the headphones to activate pairing mode. Ensure Bluetooth is enabled on your device and select 'WallarGe HP007'. |
| Short range or intermittent connection | Obstructions or interference. Distance from transmitter. | Ensure a clear line of sight between the transmitter and headphones. Reduce distance from the transmitter. Avoid placing the transmitter near other wireless devices that may cause interference. |
Specifications
- Model Name: Headphones (HP007)
- Connectivity Technology: Wireless (Bluetooth 5.3, RF 2.4GHz)
- Bluetooth Range: Up to 30 feet (9 meters)
- RF Range: Up to 100 feet (30 meters)
- Frequency Range: 20 Hz - 20,000 Hz
- Ear Placement: Over Ear
- Material: Cotton (ear pads and headband)
- Power Source: 1 Lithium Ion battery (included)
- Control Type: Button Control
- Item Weight: 1.39 pounds (0.63 kg)
- Manufacturer: ShenZhen litian technology Co.,Ltd
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official WallarGe website. You may also contact the seller directly for assistance.
