Haute42 S16-C Leverless Arcade Controller

1. Introduction

The Haute42 S16-C is a high-performance leverless arcade controller designed for fighting games and rhythm games. It features ultra-low latency, customizable RGB lighting, and a compact design for portability. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your controller.

2. Package Contents

Please verify that all items listed below are included in your package:

• S16-C Leverless Controller x1
• Kailh Low Profile Switch Button x1 (spare)
• USB Type-C Cable x1
• 6mm Button Caps x2 (spare)
• Switch Puller x1
• Anti-slip Pads x8
• Japanese Instruction Manual x1

Image: The package contents including the S16-C controller, USB cable, spare switch, button caps, switch puller, and anti-slip pads. Dimensions of the controller are also shown: 196mm (7.71inch) length, 125mm (4.92inch) width, and 12.5mm (0.49inch) thickness.

3. Compatibility & Setup

The Haute42 S16-C Leverless Controller is compatible with a wide range of platforms, including PC (Windows 10 and later), Nintendo Switch, PS3, Android devices, Steam Deck, and Arcade systems. For PS4, PS5, and Xbox One, a separate converter (e.g., Booter5 or Brook Wingman FGC) is required to bypass the 8-minute connection limit. Please refer to the official support website for detailed converter information.

Connecting Your Controller

1. Connect the provided USB Type-C cable to one of the Type-C ports on the controller.
2. Connect the other end of the USB cable to your gaming device (PC, Switch, PS3, etc.).
3. For PS4/PS5/Xbox One, connect the required converter to the EXT port on the controller, then connect the converter to your console. Do not connect the game console directly to the EXT port.
4. The controller will automatically detect the platform. You may need to switch modes for certain platforms (e.g., Switch mode).

Image: The Haute42 S16-C controller connected to various devices including a PC, Android phone, Nintendo Switch, PS3, PS4, Steam Deck, and an arcade cabinet, illustrating its broad compatibility. A note indicates that PS4, PS5, and Xbox One require a separate converter.

4. Features & Operation

The S16-C controller is equipped with a Raspberry Pi RP2024 chip and GP2040-CE firmware, ensuring ultra-low input latency of less than 1ms for a responsive gaming experience.

Key Features:

• Ultra-low Latency: Less than 1ms input delay.
• Turbo Function: Assignable for rapid button presses.
• OLED Display: Customizable screen for displaying settings and information.
• SOCD Modes: Multiple Simultaneous Opposite Cardinal Direction (SOCD) cleaning modes.
• Hot-swappable Switches: Easily replace Kailh Crystal switches.
• RGB Lighting: Fully customizable per-button RGB illumination.
• Web Configuration: Embedded web interface for advanced settings.

Image: An overview of the Haute42 S16-C's features, including 1ms latency, turbo function, OLED display, SOCD mode, hot-swappable switches, RGB customization, and web configuration.

Button Functions:

The controller features standard arcade button layouts along with dedicated system buttons and custom M1/M2 buttons.

Image: A diagram illustrating the button layout and functions of the Haute42 S16-C controller, including directional buttons, action buttons, OPTIONS/START, PS/HOME, SHARE/BACK, TOUCH, TURBO, EXT port, and OLED display.

Key Value Table:

Refer to the table below for the default key assignments across different input modes.

Image: A table detailing the key assignments for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes. It also shows the controller layout and button sizes (2.58cm/0.98inch and 2.06cm/0.81inch).

5. Customization & DIY

The Haute42 S16-C offers extensive customization options, from button switches to aesthetic elements.

Kailh Crystal Switches:

The controller uses transparent Kailh Crystal switches, which enhance the LED lighting. These switches are hot-swappable, allowing for easy replacement and customization of the button feel.

Image: Detailed view of the Kailh Crystal low-profile switches used in the Haute42 S16-C, highlighting their transparent design and mechanical specifications for smooth operation.

RGB Lighting:

Each button features customizable RGB lighting. You can adjust colors and effects to match your preference or gaming setup using the embedded web configuration interface.

Image: The Haute42 S16-C controller demonstrating various RGB lighting effects, with buttons illuminated in different colors, showcasing the customization options.

OLED Display & Top Plate:

The integrated OLED display can be customized with splash screens. The transparent acrylic top plate allows for easy insertion of custom artwork, enabling full personalization of your controller's appearance.

Image: The Haute42 S16-C controller with its customizable OLED display showing different patterns and button lighting in various colors, illustrating personalization options.

Image: Examples of custom artwork templates for the Haute42 S16-C top plate, demonstrating the DIY customization possibilities for users to personalize their controller's appearance.

6. Maintenance

To ensure the longevity and optimal performance of your Haute42 S16-C controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the surface of the controller. For stubborn dirt, slightly dampen the cloth with water. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Button Switches: If a button switch malfunctions, use the provided switch puller to carefully remove and replace it with a new Kailh Low Profile switch. Ensure the new switch is properly aligned before pressing it into place.
• Firmware Updates: Regularly check the official support website (cosmoxgaming.com/support/) for firmware updates to ensure you have the latest features and performance enhancements.

7. Troubleshooting

If you encounter issues with your Haute42 S16-C controller, refer to the following common troubleshooting steps:

Controller Not Responding:

• Ensure the USB cable is securely connected to both the controller and your device.
• Try connecting the controller to a different USB port on your device.
• Test the controller on another compatible device (e.g., a different PC) to rule out device-specific issues.
• Restart your gaming device.

Buttons Not Working Correctly:

• Check if the button switches are properly seated. If a switch feels loose, gently press it down.
• If a specific button is unresponsive, consider replacing its switch using the provided switch puller and a spare switch.
• Verify button assignments through the web configuration interface.

8-Minute Disconnection on PS4/PS5/Xbox One:

• This is expected behavior without a converter. Ensure you are using a compatible third-party converter (e.g., Booter5 or Brook Wingman FGC) connected to the controller's EXT port.
• Ensure the converter itself is updated to its latest firmware.

Firmware Update Issues:

• Follow the instructions on the official support website carefully for firmware updates.
• Ensure a stable USB connection during the update process.

Image: A visual reminder about connecting a dongle to the EXT port for PS4/PS5/Xbox One compatibility and not connecting the game console directly. It also highlights features like SOCD, game mode switching, and button layout customization.

8. Specifications

9. Warranty & Support

For technical support, warranty information, and the latest firmware updates, please visit the official ONEED support website:

cosmoxgaming.com/support/

ONEED is committed to providing high-quality gaming controllers and support to enhance your gaming experience. We understand that game controllers are a bridge between players and the game world, and we strive to create high-quality leverless arcade sticks that unlock players' gaming potential.

Image: The ONEED brand logo with the tagline "Unlock Your Gaming Potential."