Product Overview
This manual provides detailed instructions for the assembly, operation, and maintenance of your vidaXL Modern White Bedside Cabinet with RGB LED Lights. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product.
Figure 1: Front view of the vidaXL Modern White Bedside Cabinet, showcasing its sleek white design and the integrated RGB LED lighting strip at the bottom.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Assemble on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly.
- Keep small parts away from children during assembly.
- Maximum weight capacity for the top surface is 50 kg (110 lbs). Do not exceed this limit.
- The LED lights are powered via USB (5V). Use only appropriate USB power sources.
Package Contents
Verify that all parts listed below are included in your package:
- Engineered Wood Panels (various sizes for cabinet body, drawer, shelves)
- Drawer Slides and Hardware
- RGB LED Light Strip with USB Cable
- Assembly Hardware (screws, dowels, cam locks, etc.)
- Assembly Instructions Manual
Setup and Assembly
Recommended Number of People for Assembly: 2
Tools Required (not included): Phillips head screwdriver, Hammer (optional, for dowels).
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the parts list in your included assembly instructions to identify each piece.
- Assemble Cabinet Frame: Begin by connecting the side panels to the top and bottom panels using the provided dowels and cam locks. Ensure all connections are secure.
- Install Shelves: Insert the fixed shelf into the designated slots within the cabinet frame.
- Assemble Drawer: Construct the drawer box by joining the drawer sides, front, and back. Attach the drawer bottom. Install the drawer slides onto the drawer box.
- Install Drawer into Cabinet: Attach the corresponding drawer slides to the inside of the cabinet frame. Carefully slide the assembled drawer into the cabinet.
- Attach Back Panel: Secure the back panel to the cabinet frame using small nails or screws.
- Install LED Lights: Adhere the RGB LED light strip to the designated area, typically along the bottom edge or inside the open compartment. Connect the USB cable.
- Final Placement: Once assembled, carefully move the cabinet to its desired location.
Figure 2: The bedside cabinet positioned next to a bed, illustrating its functional use as a nightstand with a lamp and books.
Figure 3: Technical drawing showing the dimensions of the bedside cabinet: 34 cm (W) x 38 cm (L) x 50 cm (H).
Operating Instructions (LED Lights)
The RGB LED lights are designed to enhance the ambiance of your room. They are powered via a USB connection.
- Power Connection: Connect the USB plug of the LED light strip to any standard USB power source (e.g., USB wall adapter, power bank, computer USB port). A traditional power adapter is not included.
- Controlling Lights: The LED strip typically includes an inline controller or can be controlled via a remote (if included with your specific model). Use the controller to:
- Turn the lights On/Off.
- Change colors (RGB options).
- Adjust brightness.
- Select lighting modes (e.g., static, fade, flash).
Figure 4: The bedside cabinet with its RGB LED lights illuminated in a blue hue, demonstrating the lighting feature.
Maintenance and Care
- Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the engineered wood finish.
- Dusting: Regularly dust the cabinet to prevent buildup.
- Spills: Immediately wipe up any spills to prevent moisture damage to the engineered wood.
- LED Lights: The LED lights are designed for long life and require no specific maintenance. If they stop working, check the USB connection and power source.
- Hardware: Periodically check and tighten any loose screws or fittings to maintain stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cabinet is wobbly/unstable. | Loose screws or uneven assembly. | Check all screws and fittings and tighten them. Ensure the cabinet is on a level surface. |
| Drawer does not slide smoothly. | Drawer slides misaligned or obstructed. | Ensure drawer slides are correctly installed and aligned. Check for any obstructions in the tracks. |
| LED lights are not turning on. | No power, loose connection, or faulty USB source. | Verify the USB cable is securely plugged in. Try a different USB power source. Check the inline controller for damage. |
| LED colors are incorrect or unresponsive. | Controller malfunction or power issue. | Unplug and replug the USB power. If using a remote, check battery. |
Specifications
- Brand: vidaXL
- Model Number: 852019
- Colour: White
- Shape: Rectangular
- Material: Engineered Wood
- Dimensions (W x L x H): 34 x 38 x 50 cm (13.4 x 15 x 19.7 inches)
- Surface Height: 50 cm (19.7 inches)
- Item Weight: 8.6 kg (18.96 lbs)
- Maximum Weight Capacity: 50 kg (110 lbs)
- Number of Drawers: 1
- LED Lighting: RGB LED Lights, USB Plug Only (5V)
- Indoor/Outdoor: Indoor Only
- Assembly Required: Yes
- EAN: 8721102965845
Warranty and Support
For warranty information, please refer to the specific terms and conditions provided at the time of purchase or contact vidaXL customer service directly. This product is subject to a 30-day return policy for refunds or replacements, as per the seller's terms.
For technical support, missing parts, or any other inquiries, please contact vidaXL customer service through their official website or the platform where the product was purchased. Please have your model number (852019) and purchase details ready when contacting support.
Manufacturer: vidaXL
Seller: vidaXL-com
Visit the vidaXL Store: vidaXL Store on Amazon
