Introduction
Thank you for choosing the MecTURING Havok 1.0 Robotic Vacuum Cleaner. This advanced cleaning device combines powerful vacuuming with dual-rotating mopping, featuring a self-cleaning station and intelligent LDS laser navigation for a comprehensive home cleaning experience. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Image: The MecTURING Havok 1.0 Robotic Vacuum Cleaner, a white circular device, shown on a tiled floor with dirt and microscopic organisms, illustrating its cleaning and sterilization capabilities.
Safety Instructions
Please read all safety instructions carefully before using the MecTURING Havok 1.0. Keep this manual for future reference.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Use only the original power adapter and charging dock provided by the manufacturer.
- Do not use the robot in environments with open flames, flammable materials, or corrosive liquids.
- Ensure all cables, curtains, and small objects are cleared from the cleaning path to prevent entanglement.
- Do not operate the robot on wet surfaces or in areas with standing water.
- Avoid exposing the robot to direct sunlight or extreme temperatures.
- Do not attempt to repair or modify the robot yourself. Contact authorized service personnel for assistance.
Package Contents
Carefully unpack the box and ensure all items are present. If any items are missing or damaged, please contact customer support.
- MecTURING Havok 1.0 Robotic Vacuum Cleaner
- Self-Cleaning Station
- Power Adapter
- Main Brush
- Side Brushes (2x)
- Mop Pads (2x)
- Clean Water Tank (integrated in station)
- Dirty Water Tank (integrated in station)
- Dustbin (integrated in robot)
- User Manual (this document)
- Battery (pre-installed)
Product Overview
Robot Vacuum Components
- LDS Laser Navigation Sensor: Located on top, for precise mapping and navigation.
- Control Buttons: Power/Clean, Home/Recharge.
- Dustbin: Collects vacuumed debris.
- Main Brush: Central brush for deep cleaning carpets and hard floors.
- Side Brushes: Sweeps debris from edges and corners into the main cleaning path.
- Mop Pads: Dual-rotating pads for effective wet mopping.
- Cliff Sensors: Prevents the robot from falling down stairs.
- Charging Contacts: Connects to the self-cleaning station for charging.
Image: Top view of the MecTURING Havok 1.0 robot, highlighting the LDS laser navigation sensor on its upper surface.
Image: Bottom view of the MecTURING Havok 1.0 robot, showing the main brush, side brushes, and dual-rotating mop pads.
Self-Cleaning Station Components
- Clean Water Tank: Holds fresh water for mop washing and refilling.
- Dirty Water Tank: Collects used water from mop washing.
- Dust Collection Bag: Automatically empties the robot's dustbin.
- Charging Dock: Provides power to recharge the robot.
- Mop Washing Tray: Area where mop pads are cleaned.
- Hot Air Drying System: Dries mop pads to prevent odors.
Image: The MecTURING Havok 1.0 self-cleaning station, showing the clean and dirty water tanks and the robot docked for charging and maintenance.
Setup
1. Station Placement
- Place the self-cleaning station on a hard, level surface against a wall.
- Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (5 feet) in front of the station.
- Plug the power adapter into the station and then into a wall outlet.
2. Initial Charge
- Place the robot onto the charging contacts of the self-cleaning station.
- Ensure the robot is properly docked. The indicator light on the robot will illuminate.
- Allow the robot to fully charge before its first use (approximately 6 hours).
Image: The MecTURING Havok 1.0 robot docked at its self-cleaning station, indicating it is charging.
3. App Download and Connection
- Download the MecTURING app from your smartphone's app store.
- Follow the in-app instructions to create an account and connect your Havok 1.0 robot to your home Wi-Fi network.
- The app allows for advanced control, scheduling, and mapping features.
4. Fill Water Tank
- Remove the clean water tank from the self-cleaning station.
- Fill it with clean tap water up to the MAX line.
- Return the tank to its position in the station.
Operating Instructions
Starting a Cleaning Cycle
- Via Robot: Press the Power/Clean button on the robot once to start a cleaning cycle.
- Via App: Open the MecTURING app, select your device, and tap 'Start Cleaning'.
Cleaning Modes
- Vacuum Only: The robot will only vacuum. Mop pads can be removed or lifted automatically on carpets.
- Mop Only: The robot will only mop. Ensure mop pads are attached and the clean water tank is filled.
- Vacuum & Mop: The robot will perform both vacuuming and mopping simultaneously.
Select your preferred cleaning mode through the MecTURING app.
Image: The MecTURING Havok 1.0 robot actively cleaning a room, demonstrating its LDS laser navigation and mapping capabilities.
Scheduling and Customization
- Use the MecTURING app to set cleaning schedules for specific times and days.
- Define 'No-Go Zones' or 'Virtual Walls' on the map within the app to restrict the robot from certain areas.
- Adjust suction power and water flow levels for different cleaning needs.
Voice Control
The Havok 1.0 is compatible with Amazon Alexa and Google Home. Link your MecTURING account to your voice assistant app to control the robot with voice commands (e.g., "Alexa, start cleaning").
Image: The MecTURING Havok 1.0 robot using NavPro 6 LiDAR Detection for accurate AI-based object avoidance and mapping in a living room setting.
Maintenance
Regular maintenance ensures your MecTURING Havok 1.0 operates efficiently and extends its lifespan.
Dustbin and Filter
- The self-cleaning station automatically empties the robot's dustbin. Check the station's dust collection bag periodically and replace it when full (approximately every 60 days, depending on usage).
- Clean the robot's internal filter regularly by tapping out debris. Replace the filter every 3-6 months.
Main Brush and Side Brushes
- Remove the main brush cover and lift out the main brush. Use the cleaning tool to remove hair and debris.
- Unscrew and remove the side brushes. Clean any tangled hair or debris. Replace if worn.
- Perform these checks weekly or as needed.
Mop Pads and Water Tanks
- The self-cleaning station washes and dries the mop pads automatically.
- Periodically remove the mop pads from the robot and hand wash them for a deeper clean. Allow them to air dry completely before reattaching.
- Empty the dirty water tank from the self-cleaning station after each mopping session.
- Refill the clean water tank with fresh water before each mopping session.
Image: A collage illustrating the all-in-one features of the MecTURING Havok 1.0, including automated self-emptying, water tank refilling, hot air mop drying, and hot water self-cleaning mops.
Sensors and Charging Contacts
- Wipe all sensors (cliff sensors, wall sensors, LDS sensor window) and charging contacts on both the robot and the station with a clean, dry cloth.
- Perform this monthly to ensure accurate navigation and charging.
Troubleshooting
If you encounter issues with your MecTURING Havok 1.0, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or respond. | Low battery; Power switch off; Robot stuck. | Charge the robot; Ensure power switch is ON; Clear obstructions. |
| Poor cleaning performance. | Full dustbin; Clogged filter; Worn brushes; Low suction setting. | Empty dustbin/replace bag; Clean/replace filter; Clean/replace brushes; Increase suction via app. |
| Robot cannot find charging station. | Station obstructed; Station unplugged; Robot too far. | Clear area around station; Plug in station; Manually place robot near station. |
| Mop not cleaning effectively. | Empty clean water tank; Dirty mop pads; Low water flow setting. | Fill clean water tank; Clean/replace mop pads; Increase water flow via app. |
| App connection issues. | Incorrect Wi-Fi password; Router too far; Robot offline. | Verify Wi-Fi credentials; Move robot closer to router; Restart robot and router. |
For issues not listed here, please refer to the MecTURING app's help section or contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | MecTURING |
| Model Name | Havok 1.0 |
| Suction Power | 10000Pa |
| Battery Capacity | 5200mAh Lithium |
| Max Runtime | Up to 240 Minutes |
| Cleaning Area | Up to 3000 Sqft |
| Navigation Type | LDS Laser Navigation |
| Control Method | App Control, Voice Control (Alexa, Google Home) |
| Filter Type | Cloth |
| Item Dimensions (L x W x H) | 35L x 9.8W x 35H Centimeters |
| Item Weight | 15 Kilograms |
| Special Features | Electrolyzed Water Sterilization, Dual-Rotating Mopping, Self-Cleaning Station, No-Go Zone, Auto-Lift Mop |
Warranty and Support
MecTURING is committed to providing excellent customer service. Your Havok 1.0 Robotic Vacuum Cleaner comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions.
Service Centers
MecTURING offers a wide network of service centers to assist with product support and repairs. For service inquiries, please contact our helpline or visit our website for a list of authorized service centers.
Image: A map illustrating the widespread network of MecTURING service centers across India, with a helpline number displayed on a smartphone screen.
Contact Information
- Helpline Number: 08037203008 (Monday to Saturday, 10:00 am to 6:00 pm)
- Manufacturer/Importer: Turing Eastland Pvt Ltd, Plot No. 18, behind SBI Bank, MIDC Area, P/3, Satpur Colony, Nashik, Maharashtra 422007