Important Safety Instructions
Please read all instructions carefully before using the appliance. Retain this manual for future reference.
- Always ensure the power supply matches the voltage specified on the rating label.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Unplug from the outlet when not in use and before cleaning.
- Keep the appliance out of reach of children.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Use only manufacturer-recommended attachments.
- Do not use the appliance to pick up flammable or combustible liquids, or anything that is burning or smoking.
- Always use the appliance on a stable, level surface.
Product Overview
The Techwood TAN-6003 is a powerful 600W carpet and upholstery cleaner designed to effectively remove everyday stains. It features an extra-large brush for efficient cleaning and is suitable for various surfaces including carpets, cushions, vehicle interiors, and stairs. The device is equipped with two separate tanks: a 1.5-liter tank for clean water/solution and a 0.85-liter tank for dirty water. Accessories include a 2-in-1 suction nozzle and a crevice tool.
An image showing the Techwood TAN-6003 carpet and upholstery cleaner. The device is black and yellow, featuring two transparent tanks for clean and dirty water (1.5L and 0.85L capacity respectively). It highlights a 600W motor, an extra-large brush, and its suitability for multiple surfaces including carpets, cushions, stairs, and vehicle interiors. The model number TAN-6003 is visible at the bottom left.
Assembly and Setup
- Unpacking: Carefully remove all components from the packaging. Check for any damage.
- Attach Hose and Nozzle: Connect the flexible hose to the main unit. Securely attach the desired cleaning nozzle (e.g., the extra-large brush or 2-in-1 suction nozzle) to the end of the hose.
- Fill Clean Water Tank: Locate the clean water tank (marked "SOLUTION" or "WATER"). Open the cap and fill with clean water and a suitable carpet cleaning solution (if desired, following solution manufacturer's instructions) up to the MAX line. Close the cap securely.
- Position Dirty Water Tank: Ensure the dirty water tank is correctly seated in its designated position on the unit.
- Power Connection: Unwind the 4-meter power cord and plug the appliance into a suitable electrical outlet.
Operation
- Pre-test: Before cleaning, test the cleaning solution on an inconspicuous area of the carpet or upholstery to ensure colorfastness.
- Power On: Switch on the appliance using the power button.
- Apply Solution: Hold the nozzle over the area to be cleaned. Press the trigger on the handle to spray the cleaning solution onto the surface.
- Scrub and Extract: Move the nozzle slowly over the stained area, scrubbing gently with the brush. Release the trigger and continue moving the nozzle over the wet area to suction up the dirty water. Repeat as necessary until the stain is removed.
- Empty Dirty Water Tank: When the dirty water tank reaches its MAX fill line, or when cleaning is complete, switch off and unplug the appliance. Carefully remove the dirty water tank, empty its contents, rinse it, and re-seat it.
- Refill Clean Water Tank: If the clean water tank becomes empty during operation, switch off and unplug the appliance before refilling.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure optimal performance and extend the life of your appliance.
- After Each Use:
- Empty and rinse both the clean and dirty water tanks thoroughly.
- Rinse the cleaning nozzle and brush attachment under running water.
- Wipe down the exterior of the main unit with a damp cloth.
- Hose Cleaning: Periodically flush the hose with clean water to prevent blockages.
- Storage: Store the appliance in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the power cord is neatly wrapped.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in; power outlet faulty; power switch off. | Check power cord connection; test outlet with another device; ensure power switch is ON. |
| No spray from nozzle. | Clean water tank empty; nozzle clogged; pump issue. | Refill clean water tank; clean nozzle; contact support if pump is faulty. |
| Poor suction. | Dirty water tank full; nozzle not properly sealed; hose blockage. | Empty dirty water tank; re-attach nozzle securely; check hose for obstructions. |
| Water leaking. | Tanks not properly seated; caps not closed securely. | Ensure all tanks are correctly installed and caps are tightly closed. |
Specifications
- Model: TAN-6003
- Brand: Techwood
- Power: 600W
- Clean Water Tank Capacity: 1.5 Liters
- Dirty Water Tank Capacity: 0.85 Liters
- Power Cord Length: 4 meters
- Product Dimensions (L x W x H): 37.8 x 34.1 x 37 cm
- Product Weight: 4.59 kg
- Country of Origin: China
Warranty and Support
Techwood products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to your purchase documentation for warranty details.
Spare parts availability in the EU: 5 Years from the date of manufacture.
For technical assistance or customer service, please contact your retailer or visit the official Techwood website.