1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your Erisin Android 14 Car Multimedia System, model ES6758P. This unit is specifically designed for Fiat Panda (MK3 Type 319) models manufactured between 2013 and 2020. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical short circuits.
- Installation should be performed by a qualified professional if you are unfamiliar with car audio system wiring.
- Do not operate the device in a manner that distracts you from driving. Always prioritize road safety.
- Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Use only specified accessories and parts. Unauthorized modifications may void the warranty and cause damage.
3. Package Contents
Verify that all items listed below are included in your package:
- 1x CarPlay Bluetooth Unit
- 1x English Manual
- 1x RCA AV Connection Cable
- 1x Rear Camera Input and Control Cable
- 1x Power Cable with ISO Plug
- 1x Special CANBus Decoder Box
- 1x Radio Antenna Adapter (Din to ISO)
- 1x Radio Antenna Adapter (Din to Fakra)
- 2x Rear USB Adapter Cables
- 1x Installation Accessories
- 1x External Microphone
- 1x 4G Antenna
- 1x GPS Antenna
Figure 3.1: Included accessories and cables.
4. Setup and Installation
This section provides general guidance for installing the Erisin Car Multimedia System. Specific wiring diagrams are provided to assist with connections.
4.1 Compatibility Check
This unit is designed for Fiat Panda (MK3 Type 319) models from 2013 to 2020. Before installation, compare the panel dimensions of 246mm (width) x 78mm (height) with your vehicle's dashboard or original media player to ensure compatibility.
4.2 Installation Steps
- Disconnect Battery: Before starting, disconnect the negative terminal of your vehicle's battery.
- Remove Original Unit: Carefully remove the existing car radio or blank panel from the dashboard.
- Connect CANBus Decoder: Connect the CANBus decoder box to the vehicle's wiring harness. Ensure this is connected before attaching the main power connector to the head unit.
- Connect Wiring: Refer to the wiring diagram for connecting the power cable (ISO plug), RCA AV cables, rear camera input, USB cables, 4G antenna, and GPS antenna. Use the provided radio antenna adapters as needed.
- Install External Microphone: Position the external microphone in a suitable location, such as near the sun visor, for optimal voice pickup.
- Mount the Unit: Secure the Erisin multimedia system into the dashboard opening using the provided installation accessories.
- Reconnect Battery: Once all connections are secure and the unit is mounted, reconnect the vehicle's battery.
- Initial Power On: Turn on the vehicle's ignition and power on the multimedia system to test its functions.
Figure 4.1: System feature overview.
Figure 4.2: Before and after installation in a Fiat Panda dashboard.
Figure 4.3: Wiring diagram for system connections.
Figure 4.4: Unit dimensions.
5. Operating Instructions
The Erisin multimedia system runs on Android 14, offering a range of features for navigation, entertainment, and connectivity.
5.1 System Overview
- Operating System: Android 14
- Processor: 8-Core (MT8667 1.5GHz*4 + 2.0GHz*4 64-bit 12nm Cortex A53 CPU architecture)
- Memory: 4GB RAM + 64GB ROM
- Display: 7-inch IPS Capacitive Touchscreen
- Audio Output: 4*48W stereo with subwoofer amplifier support
Figure 5.1: Main menu interface.
5.2 GPS Navigation
The unit supports both online and offline GPS navigation. Pre-installed GPS apps like Waze, Sygic, and iGO are available. You can also download other navigation applications from the Google Play Store. Navigation can be used concurrently with other audio functions.
Figure 5.2: GPS Navigation interface.
5.3 Wireless Apple CarPlay & Android Auto
Connect your smartphone for an integrated driving experience. Wireless Apple CarPlay is supported via Bluetooth. Android Auto can be connected wirelessly via Bluetooth or via USB. This allows access to phone calls, music, navigation, and other compatible apps directly on the unit's display.
Figure 5.3: Apple CarPlay and Android Auto integration.
5.4 Bluetooth 5.0
The integrated Bluetooth 5.0 module enables hands-free calling and audio streaming. Pair your phone to make and receive calls safely and play music wirelessly.
Figure 5.4: Bluetooth 5.0 functionality.
5.5 Steering Wheel Control (SWC)
The unit supports steering wheel controls, allowing you to manage music playback and volume directly from your steering wheel for convenience and safety.
Figure 5.5: Steering Wheel Control interface.
5.6 Dual Band Wi-Fi & 4G LTE
Integrated Wi-Fi (2.4GHz and 5GHz) allows for internet access. A 4G module is also included for mobile data connectivity, enabling online features like streaming and app downloads.
Figure 5.6: Dual Band Wi-Fi capabilities.
5.7 DSP Amplifier
The built-in Digital Signal Processor (DSP) amplifier features a 16-band equalizer, allowing you to customize audio settings to your preference and vehicle acoustics for optimal sound quality.
Figure 5.7: DSP Amplifier interface.
5.8 Split Screen Functionality
The split-screen feature allows you to run two applications side-by-side, such as navigation and music playback, enhancing multitasking capabilities.
Figure 5.8: Split Screen display.
5.9 AM/FM Radio with RDS
The integrated radio tuner supports AM and FM frequencies with RDS (Radio Data System) for displaying station information.
Figure 5.9: AM/FM Radio interface.
5.10 Optional Accessories
The system supports various optional accessories to expand its functionality:
- DAB+ Digital Radio Box (ES394): For enhanced digital radio reception.
- Rear View Camera (ES680): Provides a clear view of the area behind your vehicle when reversing.
- USB DVR Camera (ES670K): Records video footage from the front of your vehicle.
- DVB-T/T2 Box (ES338): For digital TV reception.
- Car OBD2 Scan Tool (ES357): Connects to your vehicle's OBD2 port for diagnostic information.
- TPMS Module (ES341): Monitors tire pressure.
- External Microphone (ES009): An additional microphone for improved call quality.
- USB Hub Splitter (ES335) & USB 3.0 Card Reader (IP079): For expanded USB connectivity and data transfer.
- USB-RCA-Converter (ES102): For connecting RCA devices via USB.
Figure 5.10: Optional accessories for extended functions.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and unit exterior. Avoid abrasive cleaners or solvents.
- Software Updates: Periodically check for system software updates to ensure optimal performance and access to new features. Updates can typically be found on the manufacturer's website or through the unit's system settings.
- Temperature: Do not leave the unit in extreme hot or cold conditions for extended periods, as this can affect its lifespan.
7. Troubleshooting
This section addresses common issues you might encounter. For more complex problems, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Incorrect wiring, blown fuse, CANBus not connected properly. | Check all power connections, especially the CANBus decoder. Verify vehicle fuses. Ensure the black connector is properly seated after CANBus connection. |
| No sound or distorted sound. | Speaker wires incorrectly connected, volume too low, DSP settings misconfigured. | Check speaker wiring. Adjust volume. Reset DSP equalizer settings to default. |
| GPS signal weak or inaccurate. | GPS antenna improperly placed or obstructed. | Ensure the GPS antenna has a clear view of the sky and is not obstructed by metal objects. |
| CarPlay/Android Auto not connecting. | Bluetooth/USB connection issues, incompatible phone settings. | Ensure Bluetooth is enabled on your phone and the unit. For Android Auto, try both wireless and wired connections. Check phone settings for CarPlay/Android Auto permissions. |
| Steering wheel controls not working. | CANBus connection issue, incorrect wiring for SWC. | Verify CANBus decoder connection and steering wheel control wiring as per the diagram. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Android 14 Autoradio 1 din with screen for Fiat Panda (MK3 Type 319) 2013-2020 (ES6758P) |
| Operating System | Android 14 OS |
| Processor | 8-Core (MT8667 1.5GHz*4 + 2.0GHz*4 64-bit 12nm Cortex A53) |
| RAM | 4 GB |
| Internal Storage | 64 GB |
| Screen Size | 7 Inches |
| Screen Type | IPS Capacitive Touchscreen |
| Connectivity | Wireless Apple CarPlay, Wired & Wireless Android Auto, Ethernet, TF, USB, WiFi (Dual-band 2.4GHz/5GHz), Bluetooth 5.0, 4G module |
| GPS Navigation | Integrated GPS, Galileo support, Offline Map Included (Europe) |
| Audio Output Mode | Stereo, 4*48W, DSP Amplifier with 16-band Equalizer |
| Special Features | Integrated Canbus Decoding, Split Screen, RDS Radio Tuner, Steering Wheel Remote Control, Rear Camera Input, EQ |
| Compatible Devices | Smartphone |
| Control Method | App, Touch |
| Dimensions (LxWxH) | 24.6L x 24.6W x 7.8H cm |
| Country of Origin | China |
9. Warranty and Support
9.1 Product Warranty
This Erisin product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Erisin customer support. Refer to the contact information provided with your purchase or visit the official Erisin website for support resources.