GeeekPi N07 Mini Tower NVMe NAS Kit User Manual

Introduction

This manual provides essential information for the setup, operation, and maintenance of your GeeekPi N07 Mini Tower NVMe NAS Kit for Raspberry Pi 5. This kit transforms your Raspberry Pi 5 into a compact and efficient NAS solution, featuring integrated cooling and NVMe SSD expansion capabilities.

Package Contents

Please verify that all components are present before beginning assembly:

• Mini Tower Case (ABS and Acrylic parts)
• N07 M.2 NVMe SSD PCIe Peripheral Board
• ICE Tower Cooler with LED fan
• 0.96 OLED Display
• Assembly Screws and Standoffs
• Thermal Pads (for SSD and CPU)
• 4Pin JST Cable (for fan)

Image: Overview of the GeeekPi N07 Mini Tower NVMe NAS Kit, showing the assembled case, the ICE Tower Cooler, and the N07 M.2 NVMe SSD PCIe Peripheral Board.

Setup and Assembly

Follow these steps to assemble your GeeekPi N07 Mini Tower NVMe NAS Kit with your Raspberry Pi 5.

1. Prepare the Raspberry Pi 5

• Ensure your Raspberry Pi 5 is powered off and disconnected from all peripherals.

2. Install the N07 M.2 NVMe SSD Board

• Carefully attach the N07 M.2 NVMe SSD PCIe Peripheral Board to the bottom of your Raspberry Pi 5 via the PCIe interface.
• Secure the board with the provided screws.
• Install your M.2 NVMe SSD (2230/2242/2260/2280) onto the N07 board and secure it.

3. Install the ICE Tower Cooler

• Apply thermal paste or thermal pad to the CPU of the Raspberry Pi 5.
• Mount the ICE Tower Cooler onto the Raspberry Pi 5, ensuring proper contact with the CPU.
• Connect the 4Pin JST cable from the fan to the corresponding 4Pin JST interface on the Raspberry Pi 5 motherboard. This allows for system speed control of the fan.

Image: Diagram illustrating the GPIO wiring method for connecting the fan to the Raspberry Pi 5.

4. Assemble the Mini Tower Case

• Remove the protective film from the acrylic panels before assembly.
• Carefully place the assembled Raspberry Pi 5 with the N07 board and cooler into the bottom section of the Mini Tower case.
• Secure the Raspberry Pi 5 within the case using the provided hardware.
• Attach the top section of the case, ensuring the OLED display is properly seated.
• The case features a non-slip rubber strip at the bottom for stability and a quick-release design for the screen holder.
• Utilize the internal cable management design for neat routing of wires.

Image: Details of the Mini Tower case design, highlighting the quick-release screen holder, non-slip base, laser-cut acrylic side cover, and internal cable management.

Image: Labeled diagram showing easy access to all ports on the Mini Tower case, including USB, HDMI, Ethernet, and the TF card slot.

For detailed assembly instructions and visual guides, please refer to the official Wiki: https://wiki.52pi.com/index.php?title=ZP-0187

Operating Instructions

OLED Display Functionality

The integrated 0.96-inch OLED display provides real-time system status information. This includes, but is not limited to, CPU usage, temperature, memory status, SD card information, and WiFi transmission data.

Image: The 0.96-inch OLED display showing various system information such as load average, memory status, SD card information, and WiFi transmissions.

NVMe SSD Usage

To utilize the NVMe SSD for disk access, ensure that PCIe is enabled within your Raspberry Pi OS configuration. The N07 board is designed for seamless integration once PCIe is properly configured.

Cooling System

The ICE Tower Cooler efficiently dissipates heat from the Raspberry Pi 5, improving performance and stability. The fan's LED lights flash automatically and cannot be programmatically switched off. The 4Pin JST interface allows for system-controlled fan speed based on thermal needs.

Image: Close-up view highlighting the 5mm copper tube design of the ICE Tower Cooler, emphasizing its super heat dissipation capabilities.

Image: Graph showing CPU temperature performance over a three-hour bench test, demonstrating the cooler's effectiveness in maintaining stable temperatures.

MicroSD Card Access

The case design allows for easy access to the MicroSD card slot, facilitating convenient insertion and removal of the operating system storage.

Image: Illustration showing the easy access to the MicroSD card slot (TF card slot) on the Mini Tower case.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the case. For acrylic panels, avoid abrasive cleaners that may scratch the surface.
• Fan: Periodically check the fan for dust accumulation. Use compressed air to gently clear any dust from the fan blades and heatsink fins to maintain optimal cooling performance.

Troubleshooting

• OLED Display Not Working: Ensure the display is correctly connected. Software configuration is required for the OLED display to function. Refer to the official Wiki for specific setup instructions for the OLED display.
• NVMe SSD Not Detected: Verify that the N07 M.2 NVMe SSD board is securely connected to the Raspberry Pi 5's PCIe interface. Ensure that PCIe support is enabled in your Raspberry Pi OS configuration. Check the SSD for proper seating on the N07 board.
• Fan Not Spinning/LEDs Not Lighting: Check the 4Pin JST cable connection to the Raspberry Pi 5. Ensure the Raspberry Pi is powered on.
• Overheating: Ensure the ICE Tower Cooler is properly mounted with good thermal contact. Verify the fan is spinning. Ensure adequate airflow around the case.

For more in-depth troubleshooting and software configuration guides, please visit the official Wiki: https://wiki.52pi.com/index.php?title=ZP-0187

Specifications

Warranty Information

Specific warranty details for this product are typically provided at the point of purchase or on the manufacturer's official website. Please refer to your purchase documentation or contact GeeekPi customer support for warranty terms and conditions.

Support

For further assistance, technical support, or additional resources, please visit the official GeeekPi Wiki page for this product:

https://wiki.52pi.com/index.php?title=ZP-0187

This Wiki provides comprehensive guides, software setup instructions, and community support for GeeekPi products.