1. Introduction
The TYMO Airflow 2.0 Hair Straightener and Curler (Model HC506D) is a versatile 2-in-1 styling tool designed for both straightening and curling hair. This manual provides essential information for safe and effective use, including product features, operating instructions, maintenance, and troubleshooting tips.
2. Safety Information
- Keep this appliance out of reach of children.
- Do not use near water or while bathing.
- Always unplug the appliance after use and before cleaning.
- Do not operate if the cord or plug is damaged.
- Avoid contact with hot surfaces. Use the cool-touch tips or handle.
- Ensure hands are dry when plugging in or unplugging the device.
- This appliance is equipped with an automatic shut-off feature after 60 minutes of inactivity.
3. Product Features
- Upgraded 2.0 Design: Features an intelligent heating panel for gentle, even heat distribution and 3D floating plates for smoother results. Includes silicone anti-tangle tips for enhanced styling comfort.
- 2-in-1 Functionality: Designed to both curl and straighten hair, offering versatility for various hairstyles including beach waves, bouncy curls, or sleek, straight hair.
- 360° Airflow Technology: Incorporates 88 ionic cool air vents that heat, curl, and cool in a single glide, helping to lock in styles for extended periods.
- Ionic Technology: Releases millions of negative ions (54 million) to nourish hair, reduce frizz, and impart a shiny, salon-like finish.
- Fast Heat with Precision Control: Heats up quickly with 5 precise temperature settings. Integrated PTC sensors prevent excessive heat or heat loss, protecting hair during styling.
- Travel Ready: Features dual voltage (100V-240V) for international use and a 60-minute automatic shut-off for safety.



4. Setup
- Unpack: Carefully remove the TYMO Airflow 2.0 from its packaging.
- Inspect: Check the device for any signs of damage. Do not use if damaged.
- Plug In: Connect the power cord to a suitable electrical outlet. The device supports dual voltage (100V-240V).
- Power On: Long press the On/Off button for 2 seconds to turn on the device.
5. Operating Instructions
5.1. Temperature Settings
The TYMO Airflow 2.0 offers 5 precise temperature settings to suit various hair types:
- 430°F / 220°C: Recommended for Thick / Curly / Wavy Hair
- 390°F / 200°C: Recommended for Slightly Curly Hair
- 360°F / 180°C: Recommended for Dyed / Dark Color Hair
- 320°F / 160°C: Recommended for Thin / Fine / Bleached Hair
- 280°F / 140°C: Recommended for Soft / Thin Hair
Press the On/Off button briefly to cycle through the temperature settings. The LED indicators will show the selected temperature.

5.2. Using the Airflow Function
The 360° airflow function helps to set curls and reduce heat damage. Press the Airflow Button to turn the cool air on or off during styling.
5.3. Straightening Hair
- Ensure hair is clean, dry, and detangled.
- Select the appropriate temperature setting for your hair type.
- Take a small section of hair (approximately 1 inch wide).
- Place the hair section between the heating plates, close to the roots.
- Gently glide the straightener down the hair section from roots to ends in one smooth motion.
- Repeat for all sections until desired straightness is achieved.
5.4. Curling Hair
- Ensure hair is clean, dry, and detangled.
- Select the appropriate temperature setting for your hair type.
- Take a small section of hair (approximately 1 inch wide).
- Clamp: Clip the hair forward, inserting a 1-inch section of hair between the plates.
- Rotate: Twist the styler 360° until the clip is forward again, wrapping the hair around the barrel.
- Glide: Gently and slowly slide the styler down the hair section to the ends.
- Release the hair and allow the curl to cool and set.
- Repeat for all sections until desired curls are achieved.

6. Maintenance
- Cleaning: Ensure the device is unplugged and completely cool before cleaning. Wipe the plates and exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the styler in a cool, dry place, away from moisture and direct sunlight. Do not wrap the power cord tightly around the device.
- Cord Care: Regularly check the power cord for any damage. If the cord becomes twisted, untwist it before use.
7. Troubleshooting
- Problem: Curls do not hold for long.
- Solution: For super fine or naturally straight hair, consider using a hairspray for enhanced hold. The cool airflow function is designed to help set curls, but additional product may be beneficial for certain hair types.
- Problem: Hair is not curling effectively.
- Solution: Ensure you are starting from the hair roots and working down to the ends. Insert a small section of hair (approximately 1 inch) between the plates, rotate the styler 360°, and then SLOWLY GLIDE it down to the ends. Rapid gliding may not allow sufficient time for the curl to form.
- Problem: Device does not turn on.
- Solution: Check if the power cord is securely plugged into a working electrical outlet. Ensure you are long-pressing the On/Off button for at least 2 seconds to power on the device.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | HC506D |
| Product Dimensions | 11.1 x 1.3 x 1.3 inches |
| Weight | 13.93 ounces (approx. 0.87 lbs) |
| Material | Titanium plates |
| Voltage | Dual Voltage (100V-240V) |
| Temperature Settings | 5 settings (280°F - 430°F) |
| Ionic Output | 54 Million Negative Ions |
| Auto Shut-off | 60 minutes |
| Manufacturer | TYMO |

9. Warranty and Support
For warranty information and customer support, please refer to the official TYMO website or contact the retailer where the product was purchased. Keep your proof of purchase for warranty claims.
What's Included in the Package:
- 1 x TYMO Airflow Styler
- 1 x User Manual
Note: To ensure product affordability, additional accessories are not included in the standard package.





