Newsmy Portable Solar Power Station User Manual

1. Important Safety Instructions

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not disassemble, repair, or modify the unit. Incorrect reassembly may cause fire or electric shock.
• Do not expose the unit to fire or high temperatures (above 60C).
• Do not use or store the unit in direct sunlight, near heat sources, or in high humidity environments.
• Do not use non-original accessories.
• Do not operate the unit with wet hands.
• Keep out of reach of children.
• Ensure proper ventilation during use and charging. Do not cover the unit.
• If the unit emits smoke, odor, or unusual noise, stop use immediately and contact support.

2. Product Overview

2.1 Package Contents

Verify that all items are present in your package:

• Newsmy Portable Solar Power Station
• 65W PD Charger
• USB-C to USB-C Charging Cable
• MC4 to DC35135 Charging Cable
• DC5521 to Cigarette Lighter Adapter Cable
• Cigarette Lighter Adapter to DC35135 Charging Cable
• User Manual

Image: Newsmy Portable Solar Power Station with its complete charging kit, including the power station, 65W PD charger, USB-C to USB-C cable, MC4 to DC35135 cable, DC5521 to cigarette lighter adapter, and cigarette lighter adapter to DC35135 cable.

2.2 Product Diagram

Familiarize yourself with the ports and controls of your power station:

Image: Front and side view of the Newsmy Portable Solar Power Station, highlighting the power button, LED spotlight button, USB-A output ports (18W Max), USB-C IN/OUT ports (100W Max each), and DC IN/OUT ports (100W Max IN, 120W Max OUT).

• Power Button: Press and hold to turn the unit on or off.
• LED Spotlight Button: Press to cycle through light modes (low, high, SOS, off).
• USB-A Output Ports: Two 18W Max ports for charging standard USB devices.
• USB-C IN/OUT Ports: Two 100W Max Power Delivery ports for both charging devices and recharging the power station.
• DC IN Port: 100W Max input for solar panel or DC adapter charging.
• DC OUT Port: 120W Max output (12V 10A) for DC-powered devices.
• LCD Display: Shows battery level, input/output wattage, and status indicators.

3. Setup

3.1 Initial Charging

Before first use, fully charge your Newsmy Portable Solar Power Station. This ensures optimal battery performance and calibration.

1. Connect the provided 65W PD Charger to a wall outlet.
2. Connect the USB-C to USB-C Charging Cable from the charger to one of the USB-C IN/OUT ports on the power station.
3. The LCD display will show charging status. Charge until the battery indicator is full.

For faster initial charging, you can use two 100W USB-C PD chargers (not included) simultaneously to achieve up to 200W input.

4. Operating Instructions

4.1 Turning On/Off

• To turn on: Press and hold the Power Button for approximately 3 seconds. The LCD display will illuminate.
• To turn off: Press and hold the Power Button for approximately 3 seconds. The LCD display will turn off.

4.2 Charging External Devices

The power station offers multiple output ports to charge various devices:

Image: The Newsmy Portable Solar Power Station actively charging a laptop, tablet, and two smartphones, demonstrating its multi-device charging capability.

• USB-C Output: Connect your USB-C compatible devices (laptops, tablets, smartphones) to the USB-C IN/OUT ports using a USB-C to USB-C cable. These ports support up to 100W Power Delivery each.
• USB-A Output: Connect your USB-A compatible devices (smartphones, small fans, drones) to the USB-A output ports. These ports provide up to 18W.
• DC Output: Connect 12V DC devices (e.g., portable refrigerators, CPAP machines) to the DC OUT port using the appropriate DC5521 cable. This port provides 12V 10A (120W Max).

Image: A visual guide illustrating the wide compatibility of the power station, showing USB-C ports charging cameras, drones, and handheld consoles, USB-A ports charging phones, tablets, and laptops, and the DC port powering a 12V speaker and a CPAP machine.

4.3 Using the LED Spotlight

The integrated 6W LED spotlight provides illumination for various situations.

• Press the LED Spotlight Button once for low brightness.
• Press again for high brightness.
• Press a third time for SOS mode (flashing).
• Press a fourth time to turn the spotlight off.

4.4 Recharging the Power Station

Your Newsmy power station can be recharged using multiple methods:

Image: Demonstrates four ways to recharge the power station: 100W solar panel input, combined 100W PD charger and 100W solar panel input, 100W car charging, and 200W PD charging from a wall outlet.

• Wall Charging (USB-C PD): Use the included 65W PD charger and USB-C cable. For faster charging (approx. 1.75 hours), use two 100W USB-C PD chargers (not included) simultaneously.
• Car Charging: Connect the provided Cigarette Lighter Adapter to DC35135 Charging Cable to your vehicle's 12V cigarette lighter socket and the DC IN port on the power station.
• Solar Charging: Connect a compatible solar panel (up to 100W) to the DC IN port using the MC4 to DC35135 Charging Cable. The built-in MPPT controller optimizes solar input. You can also use a USB-C PD compatible solar panel with a USB-C to USB-C cable.
• Dual Input Charging: Combine a 100W USB-C PD input with a 100W DC (MPPT) input for the fastest recharge times.

5. Maintenance

5.1 Storage

• Store the power station in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, recharge the unit to approximately 50-80% every 3-6 months to maintain battery health.
• Avoid storing in environments with high humidity or corrosive gases.

5.2 Cleaning

• Wipe the exterior with a soft, dry cloth.
• Do not use abrasive cleaners or solvents.
• Ensure all ports are free of dust and debris.

5.3 Battery Care

The Newsmy Portable Solar Power Station uses a LiMnFePO4 battery, known for its longevity and safety.

Image: An exploded view of the Newsmy Portable Solar Power Station, showcasing its internal LiMnFePO4 battery cells, which contribute to its 2500+ charge cycles to 80% capacity.

• Avoid completely draining the battery frequently.
• Operate within the recommended temperature range (-20C to 60C).
• The LiMnFePO4 battery offers over 2500 charge cycles to 80% capacity, ensuring extended product lifespan.

6. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Newsmy customer support.

7. Specifications

Detailed technical specifications for the Newsmy Portable Solar Power Station:

8. Warranty and Support

8.1 Warranty Information

Newsmy products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit the official Newsmy website for specific warranty terms and conditions.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact Newsmy customer support through the following channels:

• Official Website: Visit the Newsmy official website for FAQs and support resources.
• Email Support: Refer to your product packaging or the official website for the customer service email address.
• Phone Support: Check the official website for available phone support numbers.

Please have your product model number and purchase date ready when contacting support.

9. Official Product Videos

Based on the provided product data, there are no official seller videos available for embedding in this manual.