Addtam 15FT Flat Plug Surge Protector Power Strip

Introduction

Thank you for choosing the Addtam 15FT Flat Plug Surge Protector Power Strip. This manual provides essential information for the safe and efficient use of your new power strip. Please read it thoroughly before operation and retain it for future reference.

Important Safety Instructions

• Do not exceed the electrical ratings of the power strip.
• Do not use in wet environments.
• Keep children away from the power strip.
• Do not disassemble or modify the device.
• Ensure the plug is fully inserted into the wall outlet.
• Avoid running the cord under carpets or rugs.
• This product is designed for indoor use only.

Product Features

• 15FT Flat Plug Extension Cord: Features a 0.35-inch ultra-thin, 45-degree right-angle plug for easy placement behind furniture. The 15 ft cord is made of pure copper for better current carrying capacity (15A).
• 12-in-1 Mountable Power Strip: Converts one wall socket into 8 AC outlets, 2 USB-A ports, and 2 USB-C ports, allowing simultaneous charging of up to 12 devices. Includes screw fixation design for secure installation.
• Wide Space Outlets: 3-side design with 2.2 inches spacing between each AC outlet, accommodating larger adapters without blocking adjacent sockets. Compact size (5.2*3.7*1.2 inches) saves space.
• Desktop Power Strip with USB Ports: Two USB-C ports (up to 5V/3A) and two USB-A ports (up to 5V/2.4A Max) for charging cellphones, laptops, tablets, earphones, and cameras.
• Surge Protection: Equipped with 3 complementary surge protection circuits (TVS MOV GDT) with a minimum energy-absorbing capacity of 1080 Joules. Includes an overload protection switch for device safety against over-voltage, over-current, and short-circuiting.

Image: The Addtam 15FT Flat Plug Surge Protector Power Strip, showcasing its compact design and multiple outlets.

Setup and Installation

1. Unpack: Carefully remove the power strip and all accessories from the packaging.
2. Placement: Choose a dry, indoor location for the power strip. The 15-foot cord allows for flexible placement.
3. Plug In: Insert the flat wall plug into a standard 3-prong wall outlet. The 45-degree angle allows furniture to be placed closer to the wall.
4. Mounting (Optional): If wall-mounting, use the provided screws to secure the power strip to a suitable surface. Ensure the surface can support the weight of the power strip and connected devices.

Image: A visual representation of the 15-foot flat plug extension cord, highlighting its length and thin design for discreet placement.

Image: The flat plug design of the Addtam power strip, demonstrating how it allows furniture to sit flush against the wall.

Operating Instructions

1. Power On/Off: Use the master ON/OFF switch located on the side of the power strip to control power to all connected AC outlets and USB ports.
2. Connecting AC Devices: Plug your devices into any of the 8 widely spaced AC outlets. The wide spacing prevents large adapters from blocking adjacent outlets.
3. Connecting USB Devices: Use the 2 USB-A ports or 2 USB-C ports to charge compatible devices directly.
4. Surge Protection Indicator: A "SURGE PROTECTED" LED indicator light will illuminate when the surge protection is active. If this light is off, the surge protection may have been compromised, and the unit should be replaced.

Image: The Addtam power strip displaying its 8 AC outlets and 4 USB ports (2 USB-A, 2 USB-C) for versatile charging.

Image: Close-up of the USB-A and USB-C charging ports on the Addtam power strip, indicating their respective voltage outputs.

Image: The surge protection indicator light and the master ON/OFF switch on the Addtam power strip.

Maintenance

• Keep the power strip clean and free from dust and debris.
• Do not use liquid cleaners directly on the power strip.
• Regularly check the cord and plug for any signs of damage. If damaged, discontinue use and replace the unit.

Troubleshooting

• No Power to Devices:
  • Ensure the power strip's ON/OFF switch is in the "ON" position.
  • Check if the wall outlet is functioning by plugging in another device.
  • Verify that the surge protection indicator light is illuminated. If not, the surge protection may be compromised.
• Overload Protection: If the power strip stops providing power, the overload protection switch may have tripped. Unplug some devices, then press the reset button (often integrated with the ON/OFF switch) to restore power.
• USB Ports Not Charging:
  • Ensure the device is compatible with the USB-A or USB-C port specifications.
  • Try a different USB cable.

Specifications

Warranty and Support

This Addtam power strip comes with a 1-year warranty. For any questions or support needs, please feel free to contact us. We are committed to providing assistance and ensuring your satisfaction.